Browse > Article
http://dx.doi.org/10.12989/sem.2011.38.5.633

Some characteristics of an interior explosion within a room without venting  

Feldgun, V.R. (National Building Research Institute, Technion-IIT)
Karinski, Y.S. (National Building Research Institute, Technion-IIT)
Yankelevsky, D.Z. (National Building Research Institute, Technion-IIT)
Publication Information
Structural Engineering and Mechanics / v.38, no.5, 2011 , pp. 633-649 More about this Journal
Abstract
The paper presents a study aimed at understanding some characteristics of an interior explosion within a room with limited or no venting. The explosion may occur in ammunition storage or result from a terrorist action or from a warhead that had penetrated into this room. The study includes numerical simulations of the problem and analytical derivations. Different types of analysis (1-D, 2-D and 3-D analysis) were performed for a room with rigid walls and the results were analyzed. For the 3D problem the effect of the charge size and its location within the room was investigated and a new insight regarding the pressure distribution on the interior wall as function of these parameters has been gained. The numerical analyses were carried out using the Eulerian multi-material approach. Further, an approximate analytical formula to predict the residual internal pressure was developed. The formula is based on the conservation law of total energy and its implementation yields very good agreement with the results obtained numerically using the complete statement of the problem for a wide range of explosive weights and room sizes that is expressed through a non-dimensional parameter. This new formula is superior to existing literature recommendations and compares considerably better with the above numerical results.
Keywords
confined explosion; shock wave; wave reflection; peak pressure; residual pressure;
Citations & Related Records

Times Cited By Web Of Science : 0  (Related Records In Web of Science)
Times Cited By SCOPUS : 0
연도 인용수 순위
  • Reference
1 Eamon, C.D. (2007), "Reliability of concrete masonry unit walls subjected to explosive loads", J. Struct. Eng., 133(7), 935-944.   DOI   ScienceOn
2 Gregory, F.H. (1976), "Analysis of the loading and response of a suppressive shield when subjected to an internal explosion", Minutes of the Seventeenth Explosive Safety Seminar, Denver, Colorado.
3 Griffiths, H., Pugsley, A. and Saunders, O. (1968), "Report of the Inquiry into the Collapse of Flats at Ronan Point, Canning Town", Her Majesty's Stationery Office, London.
4 Igra, O., Hu, G., Falcovitz, J. and Heilig, W. (2003), "Blast wave reflection from wedges", J. Fluid. Eng., 125(3), 510-519.   DOI   ScienceOn
5 Keenan, W.A. and Tancreto, J.E. (1974), "Blast environment from fully and partially vented explosions in cubicles", Tech. Rep. 51-027, NCEL, Port-Hueneme, CA.
6 Kinney, G.F. (1962), Explosive Shocks in Air, The Macmillan Co., New York.
7 Kivity, Y. (1992), "The reflected impulse on a curved wall produced by a spherical explosion in air", 25th Explosives Safety Seminar, Anaheim, CA.
8 Liang, S.M., Wang, J.S. and Chen, H. (2002), "Numerical study of spherical blast-wave propagation and reflection", Shock Waves, 12(1), 59-68.   DOI   ScienceOn
9 Luccioni, B.M., Ambrosini, R.D. and Danesi, R.F. (2005), "Failure of a reinforced concrete building under blast loads", WIT Trans. Eng. Sci., 49, 336-345.
10 Marchenko, A.I. and Romanov, G.S. (1984), "Numerical simulation of processes in a spherical combustion chamber", J. Eng. Phys. Thermophys, 47(4), 1230-1234.   DOI   ScienceOn
11 Michael, M. and Swisdak, Jr. (1975), "Explosion effects in air", Final Report, A445810.
12 O'Daniel, J.L. and Krauthammer, T. (1997), "Assessment of numerical simulation capabilities for mediumstructure interaction systems under explosive loads", Comput. Struct., 63(5), 875-887.   DOI   ScienceOn
13 Podlubnyi, V.V. and Fonarev, A.S. (1974), "Reflection of a spherical blast wave from a planar surface", Fluid Dyn., 9(6), 921-926.
14 Remennikov, A.M. and Rose, T.A. (2005), "Modeling blast loads on buildings in complex city geometries", Comput. Struct., 83(27), 2197-2205.   DOI   ScienceOn
15 Shear, R.E. and Makino, R.C. (1967), "A non-linear shock wave reflection theory", Pentagon Report Number: 0549946.
16 Smith, P.D. and Rose, T.A. (2006), "Blast wave propagation in city streets - an overview", Prog. Struct. Eng. Mater., 8, 6-28.
17 Smith, P.D., Whalen, G.P., Feng, L.J. and Rose, T.A. (2001), "Blast loading on buildings from explosions in city streets", Proc. Institut. Civil Eng. Struct. Build., 146(1), 47-55.   DOI   ScienceOn
18 TM-5-1500 (1990), "Structures to resist the effects of accidental explosions", Department of the Army, the NAVY and the Air Force, Washington, DC, USA.
19 TM-5-855-1 (1986), "Fundamentals of protective design for conventional weapons", Department of Army, Washington, DC, USA.
20 Tsypkin, V.A., Cheverikin, A.M., Ivanov, A.G., Novikov, S.A., Mineev, V.N. and Shitov, A.T. (1982), "Study of the Behavior of closed steel spherical shells with single-stage internal explosive loading", Strength Mater., 14(10), 1353-1359.   DOI   ScienceOn
21 Vaidogas, E.R. (2003), "Pressure vessel explosions inside buildings: assessing damage using stochastic accident simulation", Struct. Eng. Int., 13(4), 249-253.   DOI   ScienceOn
22 Zhu, W., Xue, H., Zhou, G. and Schleyer, G.K. (1997), "Dynamic response of cylindrical explosive chambers to internal blast loading produced by a concentrated charge", Int. J. Impact Eng., 19(9-10), 831-845.   DOI   ScienceOn
23 Aleksandrov, L.N., Ivanov, A.G., Mineev, V.N., Tsypkin, V.I. and Shitov, A.T. (1982), "Plastic deformation of spherical steel shells under internal blast loading", J. Appl. Mech. Tech. Phys., 23(6), 831-835.
24 A718300 (1974), "Engineering design handbook. explosions in air. part one", Army Materiel Command Alexandria, VA.
25 AASTP-1 (2006), "Manual of NATO safety principles for the storage of military ammunition and explosives", NATO International Staff - Defense Investment Division.
26 Aleksandrov, L.N., Ivanov, A.G., Mineev, V.N., Tsypkin, V.I. and Shitov, A.T. (1982), "Plastic deformation of spherical steel shells under internal blast loading", J. Appl. Mech. Tech. Phys., 23(6), 831-835.
27 Baker, W.E., Cox, P.A., Westine, P.S., Kulesz, J.J. and Strehlow, R.A. (1983), Explosion Hazards and Evaluation, Elsevier, Amsterdam.
28 Bangash, M.Y.H. (1993), Impact and Explosion. Analysis and Design, Spon Press, Blackwell Scientific Publications, Oxford.
29 Bangash, M.Y.H. and Bangash, T. (2006), Explosion-Resistant Buildings, Springer.
30 Ben-Dor, G., Igra, O. and Elperin, T. (2000), Handbook of Shock Waves, Academic Press, Elsevier.
31 Chock, J.M.K. and Kapania, R.K. (2001), "Review of two methods for calculating explosive Air blast", Shock Vib. Dig., 33(2), 91-102.   DOI   ScienceOn
32 Corneliu, B. (2004), "Evaluation and rehabilitation of a building affected by a gas explosion", Prog. Sturct. Eng. Mat., 6(3), 137-146.   DOI   ScienceOn
33 Dorn, M., Nash, M., Anderson, G., Jones, N. and Brebbia, C.A. (1996), "The numerical prediction of the collapse of a complex brick building due to an internal explosion", ASME Publications- PVP, 351, 359-364.
34 Duffey, T.A. and Romero, C. (2003), "Strain growth in spherical explosive chambers subjected to internal blast loading", Int. J. Impact Eng., 28(9), 967-983.   DOI   ScienceOn