1 |
Fett, T. and Munz, D. (2003), " T-stress and crack path stability of DCDC specimens", Int. J. Fract., 124, L165-L170
DOI
|
2 |
Fett, T. and Rizzi, G. (2005), "A fracture mechanics analysis of the DCDC specimen", Institut fur Materialforschung, Karlsruhe GmbH
|
3 |
Erdogan, F. and Sih, G.C. (1963), "On the crack extension in plates under plane loading and transverse shear", T. ISME J. Basic Eng., 519-525
|
4 |
Ayatollahi, M.R. and Bagherifard, S. (2005), "A review of mixed mode test specimens for rock and ceramic materials", The Iranian Mining Eng. Conf., Tehran, Iran, 3, 1451-1464
|
5 |
Ayatollahi, M.R. and Aliha, M.R.M. (2005), "Cracked Brazilian disk specimen subjected to mode II deformation", Eng. Fract. Mech., 72, 493-503
DOI
ScienceOn
|
6 |
Aliha, M.R.M. (2006), "Mixed mode fracture in brittle and quasi-brittle materials", Research Report, Department of Mechanical Engineering, Iran University of Science and Technology
|
7 |
Meguid, S.A. (1989), Fracture Mechanics, Elsevier science Pub.
|
8 |
Michalske, T.A., Smith, W.L. and Chen, P. (1993), "Stress intensity calibration for the double cleavage drilled compression specimen", Eng. Fract. Mech., 45(5), 673-642
|
9 |
Ritter, J.E., Fox, J.R., Hutko, D.I. and Lardner, T.J. (1998), "Moisture-assisted crack growth at epoxy-glass interfaces", J. Mater. Sci., 33, 4581-4588
DOI
ScienceOn
|
10 |
Ritter, J.E., Huseinovic, A., Chacravarthy, S.S. and Lardner, T.J. (2000), "Subcritical crack growth in soda-lime glass under mixed-mode loading" , J. Am. Ceram. Soc., 83(8), 2109-2111
DOI
ScienceOn
|
11 |
Smith, W.L. (1987), "An automated test system for studying slow crack growth in glass", Closed Loop Mag., Spring 18
|
12 |
Smith, D.J., Ayatollahi, M.R. and Pavier, M.J. (2001), "The role of T-stress in brittle fracture for linear elastic materials under mixed-mode loading", Fatigue Fract. Eng. Mater. Struct., 24, 137-150
DOI
ScienceOn
|
13 |
Smith, D.J., Ayatollahi, M.R. and Pavier, M.J. (2006), "On the consequences of T-stress in elastic brittle fracture", Proceedings of the Royal Society A, 462, 2415-2437
|
14 |
Turner, M.R., Dalgleish, B.J., He, M.Y. and Evans, A.G. (1995), "A Fracture resistance measurement method for bimaterial interfaces having large debond energy", Acta. Metal. Mater., 43(9), 3459-3465
DOI
ScienceOn
|
15 |
Fett, T., Rizzi, G. and Munz, D. (2005), "T-stress solution For DCDC specimens", Eng. Fract. Mech., 72, 145-149
DOI
ScienceOn
|
16 |
Hussain, M.A., Pu, S.L. and Underwood, J. (1974), "Strain energy release rate for a crack under combined mode I and mode II Fracture analysis", ASTM Spec. Tech. Pub., 560, 2-28
|
17 |
Janssen, C. (1974), "Specimen for fracture mechanics studies on glass", in proc, 10Th Int. Cong. on glass, Kyoto, Japan, Ceramic society of Japan, Tokyo, 10.23-10.30
|
18 |
Janssen, C. (1980), "Fracture characteristics of the DCDC specimen", Report no. R8074, Corning Glass Works, Corning, N.Y.
|
19 |
Lim, I.L., Johnston, I.W., Choi, S.K. and Boland, J.N. (1994), "Fracture testing of a soft rock with semi-circular specimens under three-point bending Part 2-mixed mode", Int. J. Rock Mech. Min. Sci. Geomech. Abstr., 31(3), 199-212
|
20 |
Ayatollahi, M.R. and Aliha, M.R.M. (2006), "On determination of Mode II fracture toughness using semicircular bend specimen", Int. J. Solids Struct., 43, 5217-5227
DOI
ScienceOn
|
21 |
Ayatollahi, M.R. and Aliha, M.R.M. (2007), "Fracture toughness study for a brittle rock subjected to mixed mode I/II loading", Int. J. Rock Mech. Min. Sci., 44(4), 617-624
DOI
ScienceOn
|
22 |
Fett, T., Gerteisen, G., Hahnenberger, S., Martin, G. and Munz, D. (1995), "Fracture tests for ceramics under mode-I, mode-II and mixed-mode loading", J. Euro. Ceram. Soc., 15, 307-312
DOI
ScienceOn
|
23 |
He, M.Y., Turner, M.R. and Evans, A.G. (1995), "Analysis of the double cleavage drilled compression specimen for interface fracture energy measurements over a range of mode mixities", Acta Metall. Mater., l43(9), 3453-3458
|
24 |
Lardner, T.J., Chacravarthy, S.S., Quinn, J.D. and Ritter, J.E. (2001), "Further Analysis of the DCDC specimen with an offset hole", Int. J. Fract., 109, 227-237
DOI
|
25 |
Sih, G.C. (1973), "Some basic problems in fracture mechanics and new concepts", Eng. Fract. Mech., 5, 365-377
DOI
ScienceOn
|
26 |
Suresh, S. Shih, C.F., Morrone, A. and O'Dowd, N.P. (1990), "Mixed-Mode fracture toughness of ceramic materials", J. Am. Ceram. Soc., 73(5), 1257-67
DOI
|