Design optimization of vibration isolation system through minimization of vibration power flow |
Xie, Shilin
(Department of Applied Physics, The Hong Kong Polytechnic University)
Or, Siu Wing (Department of Applied Physics, The Hong Kong Polytechnic University) Chan, Helen Lai Wa (Department of Applied Physics, The Hong Kong Polytechnic University) Choy, Ping Kong (ASM Assembly Automation Ltd.) Liu, Peter Chou Kee (ASM Assembly Automation Ltd.) |
1 | Brake, M.R. and Wickert, J.A. (2005), "Optimizing vibration isolation of flex circuits in hard disk drives", J. Vib. Acoust. Trans., ASME, 127, 165-172 DOI ScienceOn |
2 | Gardonio, P., Elliott, S.J. and Pinnington, R.J. (1997), "Active isolation of structural vibrations on a multipledegree- of-freedom system, Part I: Dynamics of the system", J. Sound Vib., 207, 61-93 DOI ScienceOn |
3 | Koh, Y.K. and White, R.G. (1996), "Analysis and control of vibrational power transmission to machinery supporting structures subjected to a multi-excitation system, Part I: Driving point mobility matrix of beams and rectangular plates", J. Sound Vib., 196, 496-493 |
4 | Leo, D.J. and Inman, D.J. (1999), "A quadratic programming approach to the design of active-passive vibration isolation systems", J. Sound Vib., 220(5), 807-825 DOI ScienceOn |
5 | Pinnington, R.J. (1987), "Vibrational power transmission to a seating of a vibration isolated motor", J. Sound Vib., 118, 515-530 DOI ScienceOn |
6 | Snyman, J.A., Heuns, P.S. and Vermeulen, P.J. (1995), "Vibration isolation of a mounted engine through optimization", Mech. Mach. Theory, 30, 109-118 DOI ScienceOn |
7 | Swanson, D.A., Wu, H.T. and Ashrafiuon, H. (1993), "Optimization of aircraft engine suspension systems", J. Aircraft., 30, 979-984 DOI ScienceOn |
8 | Tao, J.S., Liu, G.R. and Lam, K.Y. (2000), "Design optimization of marine engine-mount system", J. Sound Vib., 235(3), 477-494 DOI ScienceOn |
9 | Nayfeh, T.A., Emaci, E. and Vakakis, A.F. (1997), "Application of nonlinear localization to the optimization of a vibration isolation system", AIAA J., 35(8), 1378-1386 DOI ScienceOn |
10 | Lee, H.J. and Kim, K.J. (2004), "Multi-dimensional vibration power flow analysis of compressor system mounted in outdoor unit of an air conditioner", J. Sound Vib., 272, 607-625 DOI ScienceOn |
11 | Harris, C.M. (2002), Shock and Vibration Handbook, McGraw-Hill, New York |
12 | Cremer, L., Heckl, M. and Ungar, E.E. (1988), Structure-borne Sound (second edition), Springer-Verlag, Berlin |
13 | Fletcher, R. (1987), Practical Methods of Optimization, John Wiley and Sons, New York |
14 | Goyder, H.G.D. and White, R.G. (1980), "Vibrational power flow from machines into built-up structures: Part I: Introduction and approximate analyses of beam and plate-like foundations", J. Sound Vib., 68, 59-75 DOI ScienceOn |
15 | Ashrafliuon, H. (1993), "Design optimization of aircraft engine-mount systems", J. Vib. Acoust. Trans., ASME, 115, 463-467 DOI ScienceOn |
16 | Choy, P.K. and Wong, C.F. (2004), Experimental Characterization for an X-Y Motion Stage Mounting Systems, Technical Report 12156, ASM Assembly Automation Ltd., Hong Kong |
17 | Schittkowski, K. (1985), "NLQPL: A FORTRAN-subroutine solving constrained nonlinear programming problems", Ann. Oper. Res., 5, 485-500 |
18 | Alkhatiba, R., Nakhaie, J.G. and Golnaraghi, M.F. (2004), "Optimal design of passive linear suspension using genetic algorithm", J. Sound Vib., 275, 665-691 DOI ScienceOn |
19 | Ahn, Y.K., Song, J.D. and Yang, B.S. (2003), "Optimal design of engine mount using an artificial life algorithm", J. Sound Vib., 261, 309-328 DOI ScienceOn |
20 | Soliman, J.I. and Hallam, M.G. (1968), "Vibration isolation between non-rigid machines and non-rigid foundations", J. Sound Vib., 8, 329-351 DOI ScienceOn |
21 | Yu, Y.H., Peelamedu, S.M., Naganathan, N.G. and Dukkipati, R.V. (2001), "Automotive vehicle engine mounting systems: A survey", J. Dyn. Syst. -T., ASME, 123, 186-194 DOI ScienceOn |