Identification of impact forces on composite structures using an inverse approach |
Hu, Ning
(Department of Engineering Mechanics, Chongqing University, Department of Aerospace Engineering, Tohoku University)
Matsumoto, Satoshi (Department of Aerospace Engineering, Tohoku University) Nishi, Ryu (Department of Aerospace Engineering, Tohoku University) Fukunaga, Hisao (Department of Aerospace Engineering, Tohoku University) |
1 | Wang, J.T.S. and Cheng, S.H. et al. (1995), 'Local buckling of delaminated beams and plates using continuous analysis', J. Compos. Mater., 29, 1374-1402 DOI ScienceOn |
2 | Duan, S.H. and Ye, T.Q. (2002), 'Three-dimensional frictional dynamic contact analysis for predicting low-velocity impact damage in composite laminates', Adv. Eng. Softw., 33, 9-15 DOI ScienceOn |
3 | Guinard, S. and Allix, O. et al. (2002), 'A 3D damage analysis of low-velocity impacts on laminated composites', Compos. Sci. Technol., 62, 585-589 DOI ScienceOn |
4 | Akhavan, F. and Watkins, S.E. et al. (2000), 'Prediction of impact contact forces of composite plates using fiber optic sensors and neural networks', Mech. Compos. Mater. Struct., 7, 195-205 DOI ScienceOn |
5 | Choi, K. and Chang, F.K. (1996), 'Identification of impact force and location using distributed sensors', AIAA J., 34, 136-142 DOI |
6 | Doyle, J.F. (1984), 'An experimental method for determining the dynamic contact law', Exp. Mech., 24, 10-16 DOI |
7 | Doyle, J.F. (1987), 'Experimentally determining the contact force during the transverse impact of an orthotropic plate', J. Sound Vib., 118, 441-448 DOI ScienceOn |
8 | Fukunaga, H. and Hu, N. (2004), 'Health monitoring of composite structures based on impact force identification', Proceeding of the Second European Workshop, Structural Health Monitoring, Edited by C. Boller and W.J. Straszewski, 415-422 |
9 | Geubelle, P.H. and Baylor, J.S. (1998), 'Impact-induced delamination of composites: a 2D simulation', Composites: Part B, 29B, 589-602 |
10 | Hu, N. and Fukunaga, H. et al. (1999), 'Compressive buckling of laminates with an embedded delamination', Compos. Sci. Technol., 59, 1247-1260 DOI ScienceOn |
11 | Inoue, H. and Watanabe, R. et al. (1988), 'Measurement of impact force by the deconvolution method (part-a)', J. JPN Soc. Non-Destructive Inspection, 34, 337-342 |
12 | Inoue, H. and Watanabe, R. et al. (1988), 'Measurement of impact force applied to a plate by the deconvolution method (part-b)', J. JPN Soc. Non-Destructive Inspection, 37, 874-878 |
13 | Shin, E.S. (2000), 'Real-time recovery of impact force based on finite element analysis', Compos. Struct., 76, 621-627 DOI ScienceOn |
14 | Li, C.F. and Hu, N. et al. (2002), 'Low-velocity impact-induced damage of continuous fiber-reinforced composite laminates. Part I. An FEM numerical model', Composites: Part A, 33, 1055-1061 DOI ScienceOn |
15 | Li, C.F. and Hu, N. et al. (2002), 'Low-velocity impact-induced damage of continuous fiber-reinforced composite laminates. Part II. Verification and numerical investigation', Composites: Part A, 33, 1063-1072 DOI ScienceOn |
16 | Shaw, J.K. and Sirkis, J.S. et al. (1995), 'Model of transverse plate impact dynamics for design of impact detection methodologies', AIAA J., 33, 1327-1335 DOI ScienceOn |
17 | Vanderplaats, G.N. and Sugimoto, H. (1986), 'A general purpose optimization program for engineering design', Comput. Struct., 24, 13-21 DOI ScienceOn |
18 | Wang, C.S. and Chang, F.K. (1999), 'Built-in diagnostics for impact damage identification of composite structures', Structural Health Monitoring 2000, Stanford, 1999, Edited by F.K. Chang (Stanford University, 1999), 612-621 |
19 | Wu, E. and Yeh, J.C. et al. (1994), 'Identification of impact forces at multiple locations on laminated plates', AIAA J., 32, 2433-2439 DOI ScienceOn |
20 | Yen, C.S. and Wu, E. (1995), 'On inverse problem of rectangular plates subjected to elastic impact, Part I: method development and numerical verification', J. Appl. Mech., 62, 692-698 DOI ScienceOn |
21 | Yen, C.S. and Wu, E. (1995), 'On inverse problem of rectangular plates subjected to elastic impact, Part II: experimental verification and further application', J. Appl. Mech., 62, 699-705 DOI ScienceOn |