1 |
Reddy, J.N. and Chin, C.D. (1998), 'Thermo-mechanical analysis of functionally graded cylinders and plates', J. Thermal Stresses, 21, 593-602
DOI
ScienceOn
|
2 |
Liew, K.M., He, X.Q., Ng, T.Y. and Kitipornchai, S. (2002), 'Active control of FGM shell subjected to a temperature gradient via piezoelectric sensor/actuator patches', Int. J. Num. Meth. Eng., 55, 653-668
DOI
ScienceOn
|
3 |
Pradhan, S.C. and Reddy, J.N. (2004), 'Vibration control of composite shells using embedded actuating layers', Smart Mater. Struct., 13, 1245-1257
DOI
ScienceOn
|
4 |
Loy, C.T, Lam, K.Y. and Reddy, J.N. (1999), 'Vibration of functionally graded cylindrical shells', Int. J. Mech. Sci., 41, 309-324
DOI
ScienceOn
|
5 |
Pradhan, S.C. (2005), 'Vibration suppression of FGM composite shells using embedded magnetostrictive layers', Int. J. Solids Struct., 42, 2465-2488
DOI
ScienceOn
|
6 |
Warburton, G.B. (1965), 'Vibration of thin cylindrical shells', J. Mech. Eng. Sci., 7, 399-407
DOI
|
7 |
Simitses, G.J. and Anastasiadis, J.S. (1991), 'Buckling of axially loaded, moderately-thick, cylindrical laminated shells', Compos. Eng., 1(6),375-391
DOI
|
8 |
Kardomateas, G.A. (1995), 'Bifurcation of equilibrium in thick orthotropic cylindrical shells under axial compression', J. Appl. Mech., 62(1), 43-52
DOI
ScienceOn
|
9 |
Feldman, E. and Aboudi, J. (1997), 'Buckling analysis of functionally graded plates subjected to uniaxial loading', Compos. Struct., 38, 29-36
DOI
ScienceOn
|
10 |
Kardomateas, G.A. (1993), 'Buckling of thick orthotropic cylindrical shells under external pressure', J. Appl. Mech. ,60, 195-2002
DOI
ScienceOn
|
11 |
Lu, P., Lee, H.P. and Lu, C. (2005), 'An exact solution for functionally graded piezoelectric laminates in cylindrical bending', Int. J. Mech. Sci., 47, 437-458
DOI
ScienceOn
|
12 |
Sofiyev, A.H. (2004), 'The stability of functionally graded truncated conical shells subjected to A-periodic impulsive loading', Int. J. Solids Struct., 41(13), 3411-3424
DOI
ScienceOn
|
13 |
Kitipornchai, S., Yang, J. and Liew, K.M. (2006), 'Random vibration of the functionally graded laminates in thermal environments', Comput. Meth. Appl. Mech. Eng., 195, 1075-1095
DOI
ScienceOn
|
14 |
Babich, I.Y. and Kilin, V.I. (1985), 'Stability of a three-layer orthotropic cylindrical shell under axial loading', Soviet Appl. Mech., 21, 566-669
DOI
|
15 |
Biesheuvel, P.M. and Verweij, H. (2000), 'Calculation of the composition profile of a functionally graded material produced by centrifugal casting', J. Am. Ceram. Soc., 83(4), 743-749
DOI
ScienceOn
|
16 |
Birman, V. (1995), 'Buckling of functionally graded hybrid composite plates', In: Proc. 10th Conf. on Eng. Mech., Boulder, USA
|
17 |
Chandrasekaran, K. (1977), 'Torsional vibrations of some layered shells of revolution', J. Sound Vib., 55, 27-37
DOI
ScienceOn
|
18 |
He, X.Q., Liew, K.M., Ng, T.Y. and Sivashanker, A. (2002), 'A FEM model for the active control of curved FGM shells using piezoelectric sensor/actuator layers', Int. J. Num. Meth. Eng., 54(6), 853-870
DOI
ScienceOn
|
19 |
Jones, R.M. and Morgan, H.S. (1975), 'Buckling and vibration of cross-ply laminated circular cylindrical shells', AIAA J., 13(5), 664-671
DOI
ScienceOn
|
20 |
Kardomateas, G.A. (1993), 'Stability loss in thick transversely isotropic cylindrical shells under axial compression', J. Appl. Mech., 60(2),506-513
DOI
ScienceOn
|
21 |
Chung, H. (1981), 'Free vibration analysis of circular cylindrical shells', J. Sound Vib., 74, 331-350
DOI
ScienceOn
|
22 |
Donnell, L.H. (1934a), 'Stability of thin-walled tubes under torsion', NACA Tr-479
|
23 |
Donnell, L.H. (1934b), 'A new theory for the buckling of the thin cylinders under axial compression and bending', Trans Asme, 56, 795-806
|
24 |
Groves, J.F. and Wadley, H.N.G. (1997), 'Functionally graded materials synthesis via low vacuum directed vapor deposition', Compos. Part. B-Eng., 28(1-2), 57-69
DOI
ScienceOn
|
25 |
Lam, K.Y. and Loy, C.T. (1995), 'Analysis of rotating laminated cylindrical shells by different thin shell theories', J. Sound Vib., 186, 23-35
DOI
ScienceOn
|
26 |
Kieback, B., Neubrand, A. and Riedel, H. (2003), 'Processing techniques for functionally graded materials', Mater. Sci. Eng. A-Struct. Material Prop. Micro-Struct. Process, 362(1-2), 81-105
DOI
ScienceOn
|
27 |
Kim, Y.S., Kardomateas, G.A. and Zureick, A. (1999), 'Buckling of thick orthotropic cylindrical shells under torsion', J. Appl. Mech., 66, 41-50
DOI
ScienceOn
|
28 |
Kitipornchai, S., Yang, J. and Liew, K.M. (2004), 'Semi analytical for nonlinear vibration of laminated FGM plates with geometric imperfections', Int. J. Solids Struct., 41, 2235-2257
DOI
ScienceOn
|
29 |
Koizumi, M. (1993), 'The concept of FGM', Ceramic Transactions, Functionally Gradient Mater., 34, 3-10
|
30 |
Lei, M.M. and Cheng, S. (1969), 'Buckling of composite and homogeneous isotropic cylindrical shells under axial and radial loading', J. Appl. Mech., 791-798
|
31 |
Liew, K.M., Ng, T.Y. and Zhao, X. (2002), 'Vibration of axially loaded rotating cross-ply laminated cylindrical shells via ritz method', J. Eng. Mech., 128(9), 1001-1007
DOI
ScienceOn
|
32 |
Liew, K.M., Yang, J. and Wu, Y.F. (2006), 'Nonlinear vibration of a coating-FGM-substrate cylindrical panel subjected to a temperature gradient', Comput. Meth. Appl. Mech. Eng., 195(9-12), 1007-1026
DOI
ScienceOn
|
33 |
Ramirez, F., Heyliger, P.R. and Pan, E. (2006), 'Static analysis of functionally graded elastic anisotropic plates using a discrete layer approach', Composites: Part B Eng., 37, 10-20
DOI
ScienceOn
|
34 |
Reddy, J.N. and Cheng, Z.Q. (2001), 'Three-dimensional solutions of smart functionally graded plates', J. Appl. Mech., 68, 234-241
DOI
ScienceOn
|
35 |
Patel, B.P., Gupta, M.S., Loknath, M.S. and Kadu, C.P. (2005), 'Free vibration analysis of a functionally graded elliptical cylindrical shells using higher-order theory', Compos. Struct., 69, 259-270
DOI
ScienceOn
|
36 |
Pelekh, B.L. and Mamchur, I.L. (1978), 'Torsion of the laminated transversal isotropic cylindrical shells', Soviet Appl. Mech., 14, 24-28
|
37 |
Pinna, R. and Ronalds, B.F. (2000), 'Hydrostatic buckling of shells with various boundary conditions', J. Constr. Steel. Res., 56(1), 1-16
DOI
ScienceOn
|
38 |
Pitakthapanaphong, S. and Busso, E.P. (2002), 'Self-consistent elasto-plastic stress solutions for functionally graded material systems subjected to thermal transients', J. Mech. Phys. Solids, 50, 695-716
DOI
ScienceOn
|
39 |
Pradhan, S.C., Loy, C.T., Lam, K.Y and Reddy, J.N. (2000), 'Vibration characteristics of functionally graded cylindrical shells under various boundary conditions', Appl. Acoust., 61(1), 119-129
|
40 |
Put, S., Vleugels, J. and Van Der Biest, O. (2003), 'Micro structural engineering of functionally graded materials by electrophoretic deposition', J. Mater. Process. Technol., 143, 572-577
DOI
ScienceOn
|
41 |
Mandal, P. and Calladine, C.R. (2000), 'Buckling of thin cylindrical shells under axial compression', Int. J. Solid Struct., 37, 4509-4525
DOI
ScienceOn
|
42 |
Mao, R. and Lu, C.H. (1999), 'Buckling analysis of a laminated cylindrical shell under torsion subjected to mixed boundary conditions', Int. J. Solids Struct., 36, 3821-3835
DOI
ScienceOn
|
43 |
Mirfakhraei, P. and Redekop, D. (1998), 'Buckling of circular cylindrical shells by the differential quadrature method', Int. J. Pressure Vessels Piping, 75, 347-353
DOI
ScienceOn
|
44 |
Mises, R. (1929), 'Der Kritische Aussendruck Fur Allseits Belastete Cylindrisher Rohre, Festscher', Zum. 70 Geburtstage von prof. A Stodola, Zurich, 418-432. (Germany)
|
45 |
Mortensen, A. and Suresh, S. (1995), 'Functionally graded metals and metal ceramic composites', I. Proc. Int. Mater. Rev., 40(6), 239-265
|
46 |
Na, K.S. and Kim, J.H. (2006), 'Three-dimensional thermo-mechanical buckling analysis for functionally graded composite plates', Compos. Struct. in press
|
47 |
Ng, T.Y., He, X.Q. and Liew, K.M. (2002), 'Finite element modeling of active control of functionally graded shells in frequency domain via piezoelectric sensors and actuators', Comput. Mech., 28(1), 1-9
DOI
|
48 |
Ng, T.Y, Lam, K.Y., Liew, K.M. and Reddy, N.J. (2001), 'Dynamic stability analysis of functionally graded cylindrical shells under periodic axial loading', Int. J. Solids Struct.. 38, 1295-1309
DOI
ScienceOn
|
49 |
Park, H.C., Cho, C.M. and Choi, Y.H., (2001), 'Torsional buckling analysis of composite cylinders', AIAA J., 39, 951-955
DOI
ScienceOn
|
50 |
Yang, J, Liew, K.M., Wu, Y.F. and Kitipornchai, S. (2006), 'Thermo-mechanical post-buckling of FGM cylindrical panels with temperature-dependent properties', Int. J. Solids Struct., 43, 307-324
DOI
ScienceOn
|
51 |
Leissa, A.W. (1973), Vibration of Shells. NASA SP-288
|
52 |
Yang, J. and Shen, H.S. (2003), 'Free vibration and parametric resonance of shear deformable functionally graded cylindrical panels', J. Sound. Vib., 261, 871-893
DOI
ScienceOn
|
53 |
Sofiyev, A.H., Deniz, A., Akcay, I.H. and Yusufoglu, E. (2006), 'The vibration and stability of a three-layered conical shell containing a FGM layer subjected to axial compressive load', Acta Mech. (in press)
|
54 |
Tabiei, A. and Simitses, G.J. (1994), 'Buckling of moderately thick laminated cylindrical shells under trsion'. AIAA J., 21, 639-647
|
55 |
Tan, D. (2000), 'Torsional buckling analysis of thin and thick shells of revolution', Int. J. Solids Struct., 37, 3055-3078
DOI
ScienceOn
|
56 |
Touloukian, Y.S. (1967), Thermo-Physical Properties of High Temperature Solid Materials, New York: Macmillan
|
57 |
Vinson, J.R. and Sierakowski, R.L. (1986), The Behavior of Structures Composed of Composite Material. Nijhoft, Dordrecht
|
58 |
Vodenitcharova, T. and Ansourian, P. (1996), 'Buckling of circular cylindrical shells subjected to uniform lateral pressure', Eng. Struct., 18, 604-614
DOI
ScienceOn
|
59 |
Volmir, A.S. (1967), Stability of Elastic Systems, Nauka: Moscow. English Translation: Foreign Tech. Division, Air Force Systems Command. Wright-Patterson Air Force Base, Ohio, AD628508
|
60 |
Weingarten, V.I. (1964), 'Free vibrations of multilayered cylindrical shells', Exp. Mech., 200-205
|
61 |
Woo, J. and Mequid, S.A. (2001), 'Nonlinear analysis of functionally graded plates and shallow shells', Int. J. Solids Struct., 38, 7409-7421
DOI
ScienceOn
|
62 |
Xue, J. and Hoo Fatt, M.S. (2002), 'Buckling of a non-uniform, long cylindrical shell subjected to external hydrostatic pressure', Eng. Struct., 24, 1027-1034
DOI
ScienceOn
|
63 |
Shahsiah, R. and Eslami, M.R. (2003), 'Thermal buckling of functionally graded cylindrical shell', J. Thermal Stresses, 26, 277-294
DOI
ScienceOn
|
64 |
Sheinman, I., Shaw, D. and Simitses, G.J. (1983), 'Nonlinear analysis of axially loaded laminated cylindrical shells', Comput. Struct., 16(1-4), 131-137
DOI
ScienceOn
|
65 |
Shen, H.S. (2002), 'Post-buckling of shears deformable laminated cylindrical shell', Eng. Mech., 3, 296-306
|
66 |
Shen, H.S. (2003), 'Post-buckling analysis of pressure loaded functionally graded cylindrical shells in thermal environments', Eng. Struct., 25, 487-497
DOI
ScienceOn
|
67 |
Shen, H.S. and Noda, N. (2005), 'Post-buckling of FGM cylindrical shell under combined axial and radial mechanical loads in thermal environments', Int. J. Solids Struct., 42, 4641-4662
DOI
ScienceOn
|
68 |
Shen, Z.J. and Nygren, M. (2002), 'Laminated and functionally graded materials prepared by spark plasma sintering', Key. Eng. Mater., 206(2), 2155-2158
DOI
|
69 |
Sofiyev, A.H. (2003), 'Dynamic buckling of functionally graded cylindrical shells under non-periodic impulsive loading', Acta Mech., 165, 153-162
|
70 |
Sachenkov, A.V. and Baktieva, L,U. (1978), 'Approach to the solution of dynamic stability problems of thin shells (in Russian)', Research on the Theory of Plates and Shells, Kazan State Univ., 13, 137-52
|