Browse > Article
http://dx.doi.org/10.12989/sem.2007.27.2.223

The effects of stirrups and the extents of regions used SFRC in exterior beam-column joints  

Gencoglu, Mustafa (Istanbul Technical University, Faculty of Civil Engineering, Division of Structural Engineering)
Publication Information
Structural Engineering and Mechanics / v.27, no.2, 2007 , pp. 223-241 More about this Journal
Abstract
Seven full-scale exterior beam-column joints were produced and tested under reversible cyclic loads to determine. Two of these seven specimens were produced using ordinary reinforced concrete (RC). Steel Fiber Reinforced Concrete (SFRC) was placed in three different regions of the beams of the rest five specimens to determine the extent of the region where SFRC is the most effective. The extent of the region of SFRC was kept constant at the columns of all five specimens. Three of these five specimens which had one stirrup in the joint, were tested to evaluate the effect of the stirrup on the behavior of the beam-column joint together with SFRC. In production of the specimens with SFRC, all special requirements of the Turkish Earthquake Code related to the spacing of hoops were disregarded. Previous researches reported in the literature indicate that the fiber type, the volume content, and the aspect ratio of steel fibers affect the behavior of beam-column joints produced with SFRC. The results of the present investigation show that the behavior of exterior beam-column joints depends on the extent of the region where SFRC is used and the usage of stirrup in the joint, in addition to the parameters listed in the literature.
Keywords
beam-column joint; reversible cyclic loading; steel fiber; concrete; energy capacity; ductility; earthquake;
Citations & Related Records
Times Cited By KSCI : 1  (Citation Analysis)
Times Cited By Web Of Science : 3  (Related Records In Web of Science)
Times Cited By SCOPUS : 3
연도 인용수 순위
1 Chutarat, N. and Aboutaha, R.S. (2003), 'Cyclic response of exterior RC beam-column joints reinforced with headed bars - experimental investigation', ACI Struct. J., 100(2), 259-264
2 Craig, R.J., Mahadev, S., Patel, C.C., Viteri, M. and Kertesz, C. (1984), 'Behavior of Joints Using Reinforced Fibrous Concrete', Proc. of the Int. Symposium on Fiber Reinforced Concrete, SP-81, Michigan
3 Filiatrault, A., Ladicani, K. and Massicotte, B. (1994), 'Seismic performance of code designed fiber reinforced concrete joints', ACI Struct. J., 91(5), 564-571
4 Filiatrault, A., Pineau, S. and Houde, J. (1995), 'Seismic behavior of steel fiber reinforced concrete interior beam-column joints', ACI Struct. J., 92(5), 543-552
5 Fuji, S. and Morita, S. (1991), 'Comparison between interior and exterior reinforced concrete beam-column joint behavior, design of beam-column joints for seismic resistance', Proc. of the Int. Symposium on Earthquake Resistant Structures SP-123, Michigan
6 Gencoglu, M. and Eren, I. (2002), 'An experimental study on the effect of steel fiber reinforced concrete on the behavior of exterior beam-column joints subjected to reversible cyclic loading', Turkish J. Eng. Environ. Sci., 26, 493-502
7 Hakuto, S., Park, R. and Tanaka, H. (2000), 'Seismic load tests on interior and exterior beam-column joints with substandard reinforcing details', ACI Struct. J., 97(1), 11-25
8 Jindal, R. and Hasan, A.K. (1984), 'Behavior of steel fiber reinforced concrete beam-column connections', Proc. of the Int. Symposium on Fiber Reinforced Concrete, SP-81, Michigan
9 Jindal, R. and Sharma, V. (1987), 'Behavior of steel fiber reinforced concrete knee-type beam-column connections', Proc. of the Int. Symposium on Fiber Reinforced Concrete and Applications, SP-105, Michigan
10 Jiuru, T., Chaobin, H., Kaijan, Y., and Yongcheng, Y. (1992), 'Seismic Behavior and Shear Strength of Framed Joints Using Steel Fiber Reinforced Concrete', J. Struct. Eng., ASCE, 118(2), 341-358   DOI
11 Paulay, T., Park, R. and Pristley, M.J.N. (1989), 'Reinforced concrete beam-column joints', ACI Struct. J., 75(11), 585-593
12 Paulay, T. (1989), 'Equilibrium criteria for reinforced concrete beam-column joints', ACI Struct. J., 86(6), 635-643
13 Penelis, G.G. and Kappos, A.J. (1997), Earthquake Resistant Concrete Structures, E & FN Spon, London
14 Pessiki, S.P. (1990), Seismic Behavior of Lightly Reinforced Concrete Column and Beam-Column Joints Details, Technical Report NCEER-90-001
15 Pristley, M.J.N. and Calvi, E.M. (1991), 'Towards a capacity design assessment procedure of reinforced concrete frames', Earthq. Spectra, 7(3), 413-438   DOI
16 Shing, B. and Kaushik, S.K. (2002), 'Detailing of steel fiber reinforced concrete opening comers', ACI Struct. J., 99(5), 614-621
17 Sood, V. and Gupta, S. (1987), 'Behavior of steel fibrous concrete beam-column connections', Proc. of the Int. Symposium on Fiber Reinforced Concrete and Applications, SP105, Michigan
18 Tsonos, A.G. (2004), 'Improvement of the earthquake resistance of R/C beam-column joints under the influence of P-Delta effect and axial force variations using inclined bars', Struct. Eng. Mech., 18(4), 389-410   DOI   ScienceOn
19 Kitayama, K., Otani S. and Aoyama, H. (1991), 'Design of beam-column criteria for reinforced concrete interior beam-column joints, design of beam-column joints for seismic resistance', Proc. of the Int. Symposium on Earthquake Resistant Structures, SP-123, Michigan
20 Katzensteiner, B., Filiatrault, A., Mindess, S. and Banthia, N. (1992), 'Fibrous concrete in seismic design', Fourth RILEM Int. Symposium on Fiber Reinforced Cement and Concrete, Sheffield
21 Kurose, Y, Guimares, G.N., Liu, Z. and Kreger, M.E. (1988), Study Behavior of Lightly Reinforced Concrete Beam-Column Joints Under Uniaxial and Biaxial Loading, Report No. 88-2, The University of Texas at Austin, Austin
22 ACI Committee 318 (2002), Building Code Requirements for Structural Concrete (ACI 318-02) and Commentary (ACI 318R-02), American Concrete Institute, Michigan, 439pp
23 Ministry of Public Work and Housing, Settlement, Earthquake Research Institute (1998), The Specification for Structures to be Built in Disaster Areas in Turkey, Ankara
24 Murty, C.V.R., Rai, D.C., Bajpai, K.K. and Jain, S.K. (2003), 'Effectiveness of Reinforcement Details in Exterior Reinforced Concrete Beam-Column Joints for Earthquake Resistance', ACI Struct. J., 100(2), 149-156
25 Park, R. (1986), 'Ductile design approach for reinforced concrete frames', Earthq. Spectra, 2(3), 565-619   DOI   ScienceOn
26 Hwang, S.J., Lee, H.J., Liao, T.F., Wang, K.C. and Tsai, H.H. (2005), 'Role of hoops on shear strength of RC beam-column joints', ACI Struct. J., 102(3), 445-453
27 Bonacci, J. and Pantazopoulou, S. (1993), 'Parametric investigation of joint mechanics', ACI Struct. J., 90(1), 61-71
28 Aoyama, H. (1985), 'Problems associated with 'Weak Beam' design of reinforced concrete frames', J. Fac. Eng. Tokyo Univ., 38(2), 75-108
29 Bayasi, Z. and Gebman, M. (2002), 'Reduction of lateral reinforcement in seismic beam-column connection via application of steel fibers', ACI Struct. J., 99(6), 772-780
30 Shannag, M.J., Abu-Dyya, N. and Abu-Farsakh, G. (2005), 'Lateral load response of high performance fiber reinforced concrete beam-column joints', Constr. Build. Mater., 19, 500-508   DOI   ScienceOn
31 ACI-ASCE Committee 352 (2002), Recommendations for Design of Beam-Column Joints in Monolithic Reinforced Concrete Structures, American Concrete Institute, Michigan, 40pp