Browse > Article
http://dx.doi.org/10.12989/sem.2002.14.5.565

Prediction of premature separation of bonded CFRP plates from strengthened steel beams using a fracture criterion  

Lenwari, A. (Department of Civil Engineering, Chulalongkorn University)
Thepchatri, T. (Department of Civil Engineering, Chulalongkorn University)
Watanabe, E. (Department of Civil Engineering, Kyoto University)
Publication Information
Structural Engineering and Mechanics / v.14, no.5, 2002 , pp. 565-574 More about this Journal
Abstract
This paper presents a method for predicting premature separation of carbon fiber reinforced plastic (CFRP) plates from strengthened steel beams. The fracture criterion based on material-induced singularity is formulated in terms of a singular intensity factor. Static test on double strap joints was selected to provide the critical stress intensity factor in the criterion because good degree of accuracy and consistency of experimental data can be expected compared with the unsymmetrically loaded single lap joints. The debond/separation loads of steel beams with different CFRP lengths were measured and compared with those predicted from the criterion. Good agreement between the test results and the prediction was found.
Keywords
fracture; stress singularity; strengthening; CFRP; steel beams; bridges; bi-material wedges; double strap joints;
Citations & Related Records

Times Cited By Web Of Science : 8  (Related Records In Web of Science)
Times Cited By SCOPUS : 8
연도 인용수 순위
1 American Association of State Highway Bridges, AASHTO (1996), Standard Specifications for Highway Bridges, 16th edition.
2 Japanese Society of Steel Construction, JSSC (1995), Fatigue Design Recommendations for Steel Structures.
3 Groth, H.L. (1987), Analysis of Adhesive Joints, Report No. 87-17, Department of Aeronautical Structures and Materials, The Royal Institute of Technology, SWEDEN.
4 Lenwari, A. and Thepchatri, T. (2001), "Prediction of failure load in steel beams bonded with CFRP plates due to fracture at plate ends using stress singularity parameter", Proceedings of the fourteenth KKNN symposium on Civil Engineering, Kyoto, Japan, 259-265.
5 Steel Structures Painting Council (1991), Surface Preparation, Extracted from Vol. 2, Systems and Specification, 6th Edition, Pittsburgh, PA.
6 Sen, R., Liby, L., Spillett, K. and Mullins, G. (1995), "Strengthening steel composite bridge members using CFRP laminates", Non-metallic (FRP) Reinforcement for Concrete Structures, RILEM, 551-558.
7 Bogy, D.B. (1971), "Two edge-bonded elastic wedges of different materials and wedge angles under surface tractions", Transactions ASME, J. Appl. Mech., 38, 377-386.   DOI