Browse > Article

Analysis of Combustion Air Flow in Incinerator  

Lee, Dong-Hyuk (Department of Civil Engineering, Hanyang University)
Publication Information
Design & Manufacturing / v.16, no.2, 2022 , pp. 26-32 More about this Journal
Abstract
It is known that the fluidized bed incinerator, which is the subject of analysis, shows excellent performance in heat and mass transfer due to excellent mixing and contact performance between fluidized sand and fuel, and also shows relatively good combustion characteristics thanks to good mixing and long residence time for low-grade fuels. have. In this study, air flow analysis is performed to understand the characteristics of co-firing of sludge, waste oil and solid waste in the fluidized bed incinerator, flow characteristics of flue gas, and discharge characteristics of pollutants.The fluidized bed incinerator subject to analysis is a facility that incinerates factory waste and general household waste together with sludge, with a processing capacity of 32 tons/day. to be. In addition, the operation method was designed for continuous operation for 24 hours. As a result, it can be seen that the lower combustion air and the introduced secondary air are changed to a strong turbulence and swirl flow form and exit through the outlet while rotating inside the freeboard layer. The homogeneous one-way flow form before reaching the secondary air nozzle has very high diffusivity with the high-speed jet flow of the nozzle.
Keywords
CALPUFF; CALMET; COx; SOx; NOx; HCl; Dioxin;
Citations & Related Records
연도 인용수 순위
  • Reference
1 Lee. Y.S., "A Study on the Setting of CFD Boundary Condition for Hot Flow Grate Type Incinerator", KOSCO Syoposium, 2010.
2 Yoo, C.K., "Discussion on the Practical Use of CFD for Grate Type Waste Incinerators", JJ. Korea Society for Computational Fluids Engineering, Vol. 7 No. 3 September, pp. 17-26, 2002.
3 Sung, D.M., "A Study on the Combustion Characteristics of the Small Grate Type Industrial Wastes Incinerator", J. KSWM. Vol. 14 No. 6 March, pp. 579-587, 1997.
4 Ahmed, S.A and Nejsd, A.S, "Velocity Measurement in a Research combustor Psrt 1 : Isothermal Swirling FLow", Experimental Thermal and Fluid Science, Vol 5, pp. 162~174, 1992.   DOI
5 Ko, Y.G., "Numerical Simulation of Waste Bed Combustion and Gas Flow in a Grate-type Waste Incinerator", KSME Syoposium, pp. 1244-1249, 2002.
6 Drake, M.C.and Blint, R.J., "Calculations of NOx Formation Pathways in Propagating Laminar, High Pressure Premixed CH4/Air Flames", Combustion Science and Technology, Vol 75, pp. 261-285, 1991.   DOI