Browse > Article

A study on the abrasion resistance of punching carbide material of die for the application of SCP-1 material  

Kim, Seung-Soo (BEST MOTOR HOUSING & CORE Co.,Ltd.)
Lee, Min (Department of Computer Applied Mechanical Design, Seoul Jungsu Campus of Korea Polytechnic)
Lee, Chun-Kyu (Department of Metal Mold Design Engineering, Kongju National University)
Publication Information
Design & Manufacturing / v.13, no.2, 2019 , pp. 44-48 More about this Journal
Abstract
Motor core products are used as materials for electrical steel sheets and cold-rolled steel sheets according to the performance of motors. The cemented carbide material of the mold punch applied to the motor core material causes many troubles due to abrasion and burr problem. The selection of these materials has a great effect on the production life, mass production, product quality as well as mold life. The cemented carbide applied to the products of the motor core is recognized as a very important part. In this study, cold rolled steel sheet was applied to motor core SCP-1 steel 1.0mm, and The effects of abrasion and punching oil on the shear process were investigated for the selection of cemented carbide. Experiments were conducted to select and apply cemented carbide only for the motor core punch optimized for cold rolled steel. The results showed that the cemented carbide material of $CDK3^{***}$ produced the least wear and burrs.
Keywords
High-speed press; Motor core; Progressive Die; SCP-1; Tungsten carbide;
Citations & Related Records
Times Cited By KSCI : 1  (Citation Analysis)
연도 인용수 순위
1 Lim, Sae-Jong, Choi, Kye-Kwang, "Development of Small Motor Core Die for High Efficiency Induction Motor", pp. 249-251, 2009. May 22
2 Seung-Soo Kim, Yang-Jin Kim, Bon-Bin Goo, Wan-Sub Kim, Chun-Kyu Lee. "A study on the embossing Height displacement of high speed press bottom point accordance", journal of the korea society of die&mold engineering 10th V2, pp. 29-33, 2016.
3 D.H.Ha, Y.S.Kim "Optimization of the Tool Geometry of PSST", The Korea Society of Automotive Engineers, V2, pp. 503-508, 1997.
4 Ryu Ki Ryong, "A Study on the effect of clearance in the tool wear and shear characteristics on the occasion of press stamping working of carbon tool steel products", Kyungpook National University Graduate School, 2012.