Browse > Article
http://dx.doi.org/10.17958/ksmt.20.6.201812.830

Optimum Design of a Tubular Link Chain Conveyor for Sludge Transport  

Kim, Bong-Hwan (Gyeongnam National University of Science and Technology)
Jeong, Young-Jae (Dept. of Automotive Engineering, Graduate School, Gyeongnam National University of Science and Technology)
Lee, Chang-Ryeol (Gyeongnam National University of Science and Technology)
Publication Information
Journal of the Korean Society of Mechanical Technology / v.20, no.6, 2018 , pp. 830-835 More about this Journal
Abstract
The tubular link chain conveyor works under very extreme conditions such as high tensile load, friction, and dangerous operating environments. In this study, we propose an optimal design plan for reducing cost and improving performance through weight reduction of tubular link chain conveyors for sludge transport. For light weight of tubular link chain conveyor, the optimization software using SHERPA algorithms, HEEDS was used in conjunction with ANSYS Mechanical V14.5, which is widely used in structural analysis, to achieve optimal tubular link chain. Through the optimization process, 19% light weight was achieved.
Keywords
Tubular Link Chain; Sludge Transport; Structural Analysis; Optimum Design; Light Weight; Equivalent Stress; Safety Factor;
Citations & Related Records
연도 인용수 순위
  • Reference
1 V. Wankhade and S. Sharma, "Design Improvement for Enhancing the Performance of drag Conveyor Chain and its Cost Reduction," International Journal of Engineering Research and General Science, Vol. 3, Issue 2, Part 2, pp. 524-531, 2015
2 P. A. Jadhav, R. D. Kulkarni, A. B. Ghalke and A. Z. Patel, "Design and Weight optimization of Fin of Drag Chain Conveyor," International Research Journal of Engineering and Technology (IRJET), Vol. 4, Issue 4, pp. 1425-1431, 2017
3 M. S. Shinde and R. B. Patil, "Design and Analysis of a Roller Conveyor System for Weight Optimization and Material Saving," International Journal on Emerging Technologies Vol. 3, No. 1, pp. 168-173, 2012
4 J. D. Lee, C. R. Lee and B. H. Kim, "A Study on the Analysis of a Main drive Hydraulic Cylinder for Concrete Pump Car," Jou. of Korean Soc. of Mechanical Technology, Vol. 19(5), pp. 735-741, 2017   DOI
5 B. H. Lee, C. R. Lee, Y. J. Jeong and B. H. Kim, "A Study on the Analysis of Electric Vehicle Rotor Shaft for Light-Weight," Jou. of Korean Soc. of Mechanical Technology, Vol. 20(2), pp. 154-159, 2018   DOI
6 ANSYS Inc. "ANSYS Work bench USER Manual," Version 14, 2013
7 HEEDS MDO, Basic Training, Ver 7.0, Red Cedar Technology, 2016
8 "SHERPA - An Efficient and Robust Optimization/Search Algorithm," Red Cedar Technology
9 A. Katterfeld and K. Williams, "Functional Analysis of Tube Chain Conveyors Part 1: General Design and calculation Principles," Bulk Solids & Power-Science & Technology, Vol. 3, No. 1, pp. 23-32, 2008
10 N. G. Barge and S. L. Shinde, "Design and Analysis of Drag Chain to Reduce Failure Modes for handling of Fertilizer Materials," International Journal of Engineering Research & Technology (IJERT), ISSN: 2278-0181, Vol. 6, Issue 06, pp. 705-710, 2017