Browse > Article

Structural Analysis on the Fracture of Bonded Double Cantilever Beam Model  

Choi, H.K. (공주대학교 기계공학과 대학원)
Cho, J.U. (공주대학교 기계자자동차공학부)
Publication Information
Journal of the Korean Society of Mechanical Technology / v.14, no.4, 2012 , pp. 41-47 More about this Journal
Abstract
Aluminum foam with the property as the excellent impact absorption has been widely used recently. It is necessary to study fracture energy due to fracture toughness by the use of adhesive joint at aluminum foam. This study aims at strength evaluation about adhesive joint on aluminum foam and the fracture of bonded DCB model with this material property is analyzed by simulation. These models are designed by differing in height on the basis of British industrial and ISO standards. As the value of height at model is higher, bonded part is separated to the end. By comparing some analysis results with experimental data, these data could agree with each other. By the verification with experimental results, these all simulation results in this study can be applied on real composite structure with aluminum foam material effectively. The fracture behavior and mechanical property can also be examined by this study.
Keywords
Aluminum foam; Double cantilever beam; Fracture behaviour; Adhesively Bonded Structures;
Citations & Related Records
Times Cited By KSCI : 1  (Citation Analysis)
연도 인용수 순위
1 이찬주외 5인, "Cohesive Zone model을 이용한 접착제 물성평가 : 모드 I", 대한기계학회춘계학술대회 논문집, pp. 226-231, 2008
2 이택순, 최영근, "단소섬유/에폭시 복합재료의 Mode I 층간파괴거동에 미치는 섬유배향각의 영향에 관한 연구", 대한기계학회 논문집, 제19권, 제2호, pp. 391-401, 1995
3 British Standard, BS 7991, "Determination of the Mode I Adhesive Fracture Energy GIC of Structure Adhesives Using the Double Cantilever Beam (DBC) and Tapered Double Cantilever Beam (TDCB) Specimens", Imperial College of Science and Technology (JISC), pp. 3-13, 2001
4 International Standards Organization, ISO 11343, Geneva(Switzerland), 1993
5 A. Swanson, J., Ansys 12.0, Ansys Inc, U.S.A, 2009
6 김승철외 3인, "CZM(Cohesive Zone Model)을 이용한 철도차량용 직물 복합재의 모우드 I 층간파괴의 해석적 연구", 한국철도학회논문집, 제12권, 제5호, pp. 719-724, 2009
7 김태원, 김병조, 김용, "내충격 성능을 위한 알루미늄 폼재의 밀도와 기하학적 특성", 대한기계학회 춘추학술대회, pp. 11-14, 2007
8 방승옥외 4인, "알루미늄 폼 및 허니컴 샌드위치 복합재료의 압축실험에 관한 연구", 산학기술학회논문지, 제12권, 제9호, pp. 3802-3807, 2011
9 조재웅, "자동차 그릴 프레임의 내구성 해석", 한국기계기술학회 논문집, 제14권, 제3호, pp. 51-57, 2012
10 정남용, 박성일, "접착부재의 초음파 강쇠계수에 의한 계연균열 길이의 측정", 한국자동차공학회논문집, 제12권, 제1호, pp. 130-137, 2004
11 고대철, 김병빈, A. C. Taylor, "구조용 접착제의 신뢰성 평가기술", 한국정밀공학회 2011년도 춘계학술대회 논문집(하), pp. 1581-1582, 2011
12 박성완, "연성접착제를 사용한 접착이음의 강도 평가에 대한 해석", 한국기계기술학회 논문집, 제11권, 제2호, pp. 1-10, 2009