Browse > Article

A Study on the Flow rate Analysis of a Sanitary Fixture for Water Supply Piping System  

JANG, Y.K. (용인송담대학 건축소방설비과)
KIM, D.J. (용인송담대학 건축소방설비과)
SUH, B.T. (용인송담대학 건축소방설비과)
Publication Information
Journal of the Korean Society of Mechanical Technology / v.13, no.4, 2011 , pp. 9-14 More about this Journal
Abstract
The flow rate analysis for sanitary fixtures has been studied to determine the water supply piping system and size. The study has been carried out to analyze for a various water supply pressure and piping size theoretically. Also, the study has been carried out to analyze for a various water supply piping system experimentally. The water supply pressure is varied from 0.01MPa to 0.07MPa, and the piping size is varied from 6mm to 15mm. The water supply piping systems are one-to-one, all-loop-type, and bathroom-loop-type water supply piping system. The results indicate that the piping size is able to supply water fully in case of smaller than 15mm if the water supply pressure keep an necessary minimum pressure. And the gap of flow rate is very little for the various water supply piping systems.
Keywords
Water supply piping system; Sanitary fixture; Piping size; Water supply pressure; Flow rate;
Citations & Related Records
연도 인용수 순위
  • Reference
1 Y. H. Lee, "The evaluation of the simultaneous flow rate for sizing the water supply piping in the office building", Korean Journal of Air-Conditioning and Refrigeration Engineering, Vol. 11, No. 4, pp. 511-517, 1999
2 T. W. Lee, Y. K. Kim, and T. S. Han, "An experimental study of on the water supply method combined with the variable diameter dual piping system", Proceedings of the SAREK 2010 Summer Annual Conference, pp. 904-909, 2010
3 SAREK Handbook, "Sanitary, Fire- Protection and Environment", Vol. 4, 2001
4 H. K. Jeon, H. L. Choo, and S. C. Woo, "The hydraulic calculation for a dry system and the analysis for its design propriety", Journal of the Korean Society of Mechanical Technology, Vol. 11, No. 3, pp. 83-88, 2009   DOI