The Impact of Deflection on the Sensing Response of Fiber Bragg Gratings Bonded to Graphene and PMMA Substrates |
Salih, Younis Mohammed
(School of Ocean Engineering Technology and Informatics, Universiti Malaysia Terengganu)
Ameen, Mudhaffer Mustafa (Department of Physics, Faculty of Education, Tishk International University) Muhammadsharif, Fahmi F. (Department of Physics, Faculty of Science and Health, Koya University) Ahmad, Mohammad Fadhli (School of Ocean Engineering Technology and Informatics, Universiti Malaysia Terengganu) Mokhtar, Nor Aieni Haji (School of Ocean Engineering Technology and Informatics, Universiti Malaysia Terengganu) Saeed, Ismael Mohammed Mohammed (Department of Physics, College of Educational Science, University of Garmian) Siddique, Md Nurul Islam (School of Ocean Engineering Technology and Informatics, Universiti Malaysia Terengganu) Dagang, Ahmad Nazri (School of Ocean Engineering Technology and Informatics, Universiti Malaysia Terengganu) Rahman, Salisa Abdul (School of Ocean Engineering Technology and Informatics, Universiti Malaysia Terengganu) Latiff, Nurul Adilah Abdul (School of Ocean Engineering Technology and Informatics, Universiti Malaysia Terengganu) Ismail, Abd Khamim (Department of Physics Faculty of Science, Universiti Teknologi Malaysia) |
1 | K. O. Hill and G. Meltz, "Fiber Bragg grating technology fundamentals and overview," J. Lightwave Technol. 15, 1263-1276 (1997). DOI |
2 | W. W. Morey, G. Meltz, and W. H. Glenn, "Fiber optic Bragg grating sensors," Proc. SPIE 1169, 98-107 (1990). |
3 | J. Skaar, "Synthesis and characterization of fiber Bragg gratings," Ph. D. Dissertation, Norwegian University of Science and Technology, Norway (2000), pp. 1-2. |
4 | S. A. Mastro, "Optomechanical behavior of embedded fiber Bragg grating strain sensors," Ph. D. Dissertation, Drexel University, USA (2005). |
5 | S. Choi, S.-L. Lee, J. Kim, S. J. Jeong, M. S. Kim, D. Kim, and Y. W. Lee, "High sensitivity polarimetric optical fiber pressure sensor based on tapered polarization-maintaining and fiber Bragg grating," J. Nanosci. Nanotechnol. 19, 1403-1409 (2019). DOI |
6 | S. Liang, S. C. Tjin, B. Lin, X. Sheng, S. Lou, Y. Zhang, and X. Wang, "Novel fiber Bragg grating sensing method based on the sidelobe modulation for ultrasound detection," J. Lightwave Technol. 37, 2686-2693 (2019). DOI |
7 | E. Vorathin, Z. M. Hafizi, A. M. Aizzuddin, and K. S. Lim, "A highly sensitive multiplexed FBG pressure transducer based on natural rubber diaphragm and ultrathin aluminium sheet," Opt. Laser Technol. 106, 177-181 (2018). DOI |
8 | E. Vorathin, Z. M. Hafizi, A. M. Aizzuddin, and K. S. Lim, "A natural rubber diaphragm based transducer for simultaneous pressure and temperature measurement by using a single FBG," Opt. Fiber Technol. 45, 8-13 (2018). DOI |
9 | E. Vorathin, Z. M. Hafizi, A. M. Aizzuddin, M. K. A. Zaini, and K. S. Lim, "Temperature-independent chirped FBG pressure transducer with high sensitivity," Opt. Lasers Eng. 117, 49-56 (2019). DOI |
10 | H. Wu, Q. Lin, Z. Jiang, F. Zhang, L. Li, and L. Zhao, "A temperature and strain sensor based on a cascade of double fiber Bragg grating," Meas. Sci. Technol. 30, 065104 (2019). DOI |
11 | F. Yu, Y. Okabe, Q. Wu, and N. Shigeta, "Fiber-optic sensor-based remote acoustic emission measurement of composites," Smart Mater. Struct. 25, 105033 (2016). DOI |
12 | M. Matin, N. Hussain, and R. Shoureshi, "Fiber Bragg sensor for smart bed sheet," Proc. SPIE 5907, 590706 (2005). |
13 | L. Htein, Z. Liu, B. Zhou, and H.-Y. Tam, "Bragg grating in novel two-core holey fiber for simultaneous measurement of pressure and temperature," in Proc. IEEE Opto-Electronics and Communications Conference (OECC) and Photonics Global Conference (PGC) (Singapore, Jul. 2017), pp. 1-2. |
14 | H.-N. Li, D.-S. Li, and G.-B. Song, "Recent applications of fiber optic sensors to health monitoring in civil engineering," Eng. Struct. 26, 1647-1657 (2004). DOI |
15 | Y.-B. Lin, T.-K. Lin, Y.-H. Kuo, L. Wang, and K.-C. Chang, "Application of FBG sensors to strain and temperature monitoring of full scale prestressed concrete bridges," in Proc. IEEE 15th Optical Fiber Sensors Conference Technical Digest. OFS 2002 (Cat. No.02EX533) (OR, USA, May 2002), pp. 211-214. |
16 | Z. Xiaobo, C. Yiwang, Z. Pin, Y. Qin, N. Jiazheng, and D. Xiaohua, "Tunable low phase-noise microwave generation utilizing an optoelectronic oscillator and a fiber Bragg grating," Curr. Opt. Photon. 2, 96-100 (2018). DOI |
17 | N. Miesen, Y. Mizutani, R. M. Groves, J. Sinke, and R. Benedictus, "Lamb wave detection in prepreg composite materials with fibre Bragg grating sensors," Proc. SPIE 7981, 79812J (2011). |
18 | T. H. T. Chan, L. Yu, H.-Y. Tam, Y.-Q. Ni, S. Liu, W. H. Chung, and L. K. Cheng, "Fiber Bragg grating sensors for structural health monitoring of Tsing Ma bridge: Background and experimental observation," Eng. Struct. 28, 648-659 (2006). DOI |
19 | G. Rajan, S. Jinachandran, J. Xi, H. Li, J. S. Vinod, T. Moses, S. Karekal, and B. G. Prusty, "Fibre optic acoustic emission measurement technique for crack activity monitoring in civil engineering applications," in Proc. IEEE Sensors Applications Symposium (SAS), (Catania, Italy, Apr. 2016), pp. 1-6. |
20 | J. R. Lee, S. Y. Chong, C. Y. Yun, and H. Sohn, "Design of fiber Bragg grating acoustic sensor for structural health monitoring of nuclear power plant," Adv. Mater. Res. 123-125, 859-862 (2010). DOI |
21 | R. Ramalingam, R. Nast, and H. Neumann, "Strain characterization of high temperature superconductor tapes using embedded fibre Bragg grating sensor in mid-rip and parallel configuration," J. Supercond. Nov. Magn. 30, 1963-1970 (2017). DOI |
22 | Y. Liu, L. Li, L. Zhao, J. Wang, and T. Liu, "Research on a new fiber-optic axial pressure sensor of transformer winding based on fiber Bragg grating," Photonic Sens. 7, 365-371 (2017). DOI |
23 | G.-S. Seo and T.-J. Ahn, "Protection Method for Diameterdownsized Fiber Bragg Gratings for Highly Sensitive Ultraviolet Light Sensors," Curr. Opt. Photon. 2, 221-225 (2018). DOI |
24 | V. R. Pachava, S. Kamineni, S. S. Madhuvarasu, K. Putha, and V. R. Mamidi, "FBG based high sensitive pressure sensor and its low-cost interrogation system with enhanced resolution," Photonic Sens. 5, 321-329 (2015). DOI |
25 | D.-C. Seo, D.-J. Yoon, I.-B. Kwon, and S.-S. Lee, "Sensitivity enhancement of fiber optic FBG sensor for acoustic emission," Proc. SPIE 7294, 729415 (2009). |
26 | S. Y. Chong, J.-R. Lee, C.-Y. Yun, and H. Sohn, "Design of copper/carbon-coated fiber Bragg grating acoustic sensor net for integrated health monitoring of nuclear power plant," Nucl. Eng. Des. 241, 1889-1898 (2011). DOI |
27 | M. Moccia, M. Pisco, A. Cutolo, V. Galdi, P. Bevilacqua, and A. Cusano, "Opto-acoustic behavior of coated fiber Bragg gratings," Opt. Express 19, 18842-18860 (2011). DOI |
28 | H. A. Fayed, M. Mahmoud, A. K. A. Seoud, and M. H. Aly, "A wide range tunable fiber Bragg grating using fast changeable electromagnetic force," Proc. SPIE 7750, 77501R (2010). |
29 | A. Iocco, H. G. Limberger, R. P. Salathe, L. A. Everall, K. E. Chisholm, J. A. Williams, and I. Bennion, "Bragg grating fast tunable filter for wavelength division multiplexing," J. lightwave technol. 17, 1217 (1999). DOI |
30 | S. Jin, H. Mavoori, R. Espindola, L. Adams, and T. Strasser, "Magnetically tunable fiber Bragg gratings," in Optical Fiber Communication Conference and the International Conference on Integrated Optics and Optical Fiber Communication (Optical Fiber Communication Conference, 1999), pp. ThJ2. |
31 | C. S. Goh, M. Mokhtar, S. Butler, S. Y. Set, K. Kikuchi, and M. Ibsen, "Wavelength tuning of fiber Bragg gratings over 90 nm using a simple tuning package," IEEE Photonics Technol. Lett. 15, 557-559 (2003). DOI |
32 | Z. Qin, Q. Zeng, X. Yang, D. Feng, L. Ding, G. Kai, Z. Liu, S. Yuan, X. Dong, and N. Liu, "Bidirectional grating wavelength shifter with a broad-range tunability by using a beam of uniform strength," IEEE Photonics Technol. Lett. 13, 326-328 (2001). DOI |
33 | M.-K. Kang, D.-J. Park, and S.-S. Lee, "Strain measurements on a cantilever beam with fiber Bragg grating sensors using a pair of collimators," Int. J. Precis. Eng. Man. 13, 455-458 (2012). DOI |
34 | Y. Yu, H. Tam, S. Geng, M. S. Demokan, Z. Liu, and W. Chung, "Chirp-free tuning of fiber Bragg grating using a cantilever beam," Jpn. J. Appl. Phys. 38, L1032 (1999). DOI |
35 | K. Feng, J. Cui, X. Jiang, J. Li, and J. Tan, "Analysis and simulation method of the cantilever FBG sensors," Proc. SPIE 9903, 99031E (2016). |
36 | Y. Mizutani and R. M. Groves, "Multi-functional measurement using a single FBG sensor," Exp. Mech. 51, 1489-1498 (2011). DOI |
37 | O. F. Ameen, M. H. Younus, M. S. Aziz, A. I. Azmi, R. K. R. Ibrahim, and S. K. Ghoshal, " Graphene d iaphragm integrated FBG sensors for simultaneous measurement of water level and temperature," Sens. Actuators, A 252, 225-232 (2016). DOI |
38 | J. Waldbjorn, J. Hogh, J. Wittrup-Schmidt, M. W. Nielsen, K. Branner, H. Stang, and C. Berggreen, "Strain and displacement controls by fibre Bragg grating and digital image correlation," Strain 50, 262-273 (2014). DOI |
39 | M. H. Yau, "Vertical displacement measurement using fibre Bragg grating (FBG) sensors for structural health monitoring of bridges," Ph. D. Thesis, Queensland University of Technology, Australia (2014). |
40 | J. Ma, W. Jin, H. L. Ho, and J. Y. Dai, "High-sensitivity fiber-tip pressure sensor with graphene diaphragm," Opt. Lett. 37, 2493-2495 (2012). DOI |
41 | H. Jang, Y. J. Park, X. Chen, T. Das, M. S. Kim, and J. H. Ahn, "Graphene-based flexible and stretchable electronics," Adv. Mater. 28, 4184-4202 (2016). DOI |
42 | Y. M. Salih, Y. Munajat, A. K. Ismail, and H. Bakhtiar, "Response of FBG-bonded plastic plate at different locations of applied stress," J Teknol. 78, 77-83 (2016). |
43 | M. Hernaez, C. R. Zamarreno, S Melendi-Espina, L. R. Bird, A. G. Mayes, and F. J. Arregui, "Optical fibre sensors using graphene-based materials: A review," Sensors 17, 155 (2017). DOI |
44 | Sridevi. S, K. S. Vasu, S. Asokan, and A. K. Sood, "Enhanced strain and temperature sensing by reduced graphene oxide coated etched fiber Bragg gratings," Opt. Lett. 41, 2604-2607 (2016). DOI |
45 | I. L. Justino, A. R. Gomes, A. C. Freitas, A. C. Duarte, T. A. P. Rocha-Santos, "Graphene based sensors and biosensors," TrAC, Trends Anal. Chem. 91, 53-66 (2017). DOI |
46 | W. Zhang, W. Chen, Y. Shu, X. Lei, and X. Liu, "Effects of bonding layer on the available strain measuring range of fiber Bragg gratings," Appl. Opt. 53, 885-891 (2014). DOI |
47 | Y. Zhao, X.-g. Li, X. Zhou, Y. Zhang, "Review on the graphene based optical fiber chemical and biological sensors," Sens. Actuators B Chem. 231 324-340 (2016). DOI |
48 | R. Gafsi and M. A. El-Sherif, "Analysis of inducedbirefringence effects on fiber Bragg gratings," Opt. Fiber Technol. 6, 299-323 (2000). DOI |
49 | J. Molimard, S. Vacher, and A. Vautrin, "Monitoring LCM process by FBG sensor under birefringence," Strain 47, 364-373 (2011). DOI |