Browse > Article
http://dx.doi.org/10.13067/JKIECS.2015.10.1.27

Design of Electromagnetic Band Gap Structure for Global Navigation Satellite Service  

Chung, Ki-Hyun (서울과학기술대학교 NID융합기술대학원)
Jang, Young-Jin (서울과학기술대학교 일반대학원 미디어IT공학과)
Yeo, Sung-Dae (서울과학기술대학교 NID융합기술대학원)
Jung, Chang-Won (서울과학기술대학교 NID융합기술대학원)
Kim, Seong-Kweon (서울과학기술대학교 전자IT미디어공학과)
Publication Information
The Journal of the Korea institute of electronic communication sciences / v.10, no.1, 2015 , pp. 27-32 More about this Journal
Abstract
In this paper, a mushroom typed electromagnetic band gap (EBG) structure to be inserted in the printed circuit board (PCB) inner layer in order to stabilize the PCB power line is proposed for global-navigation satellite service (GNSS). In designing the proposed EBG structure, the target stop-bandwidth was designed from 1.55GHz to 1.81GHz including GNSS and mobile communication-related frequency bandwidth. In this bandwidth, the insertion loss(S21) was observed below about -40dB. From the simulation results, it is expected that the stabilization of power delivery network (PDN) structure in the PCB circuit design should be improved and the effective correspondence to EMI will be helpful.
Keywords
EBG; PCB; PDN; EMI; SSN(Simultaneous Switching Noise);
Citations & Related Records
Times Cited By KSCI : 2  (Citation Analysis)
연도 인용수 순위
1 S. Radu and D. Hockanson, "An investigation of PCB radiated emissions from simultaneous switching noise," In Proc. IEEE Int. Symp. Electromagnetic Compatibility, Seattle, WA, vol. 2, Aug. 1999, pp. 893-898.
2 K. H Chung, Y. J Jang, C. W Jung, S. K Kim, "A study on Source Stability Design Method by Power Integrity Analysis," J. of the Korea Institute of Electronic Communication Sciences, vol. 9, no. 7, June 2014, pp. 753-759.   과학기술학회마을   DOI
3 V. Ricchiuti, "Power-supply decoupling on fully populated high-speed digital PCBs," IEEE Trans. Electromagnetic Compatibility, vol. 43, no. 4, Nov. 2001, pp. 671-676.   DOI
4 M. Xu, T. H. Hubing, J. Drewniak, T. Van Doren, and R. E. DuBroff, "Modeling printed circuit boards with embedded decoupling capacitance," IEEE Int. Symp. Electromagnetic Compatibility, Montreal, Canada, Aug. 2001, pp. 515-520.
5 S. Shahparnia and O. M. Ramahi, "Electromagnetic interference(EMI) reduction from printed circuit boards (PCB) using electromagnetic band gap structures," IEEE Trans. Electromagnetic Compatibility, vol. 46, no. 4, Nov. 2004, pp. 580-587.   DOI
6 D. Sievenpiper, L. Zhang, R. F. J. Broas, N. G.Alexopolous, and E. Yablonovitch, "High impedance electromagnetic surfaces with a forbidden frequency band," IEEE Trans. Microwave Theory and Techniques, vol. 47, no. 11, Nov. 1999. pp. 2059-2074.   DOI
7 T. Kamgaing, and O. M. Ramahi, "Inductanceenhanced high-impedance surfaces for broadband simultaneous switching noise mitigation in power planes," In Proc. IEEE MTT-S Int. Microw. Symp. Digest, vol. 3, June 2003, pp. 2165-2168.
8 S. Shahparnia, B. Mohajajer-Iravani, and O. M. Ramahi, "Eletromagnetic noise mitigation in high-speed printed circuit boards and packaging using electromagnetic bandgap structures," 54th Electronic Components and Technology Conf., Las Vegas, NV, June 2004, pp. 1831-1836.
9 G. T Lei, R. W. Techentin, P. R. Hayes, D. J. Schwab, and B. K. Gilbert, "Wave Model Solution to the Ground/Power Plane Noise Problem," IEEE Trans. Instrumentation and Measurement, vol. 44, no. 2, Nov. 1995, pp. 300-303.   DOI
10 J. Mao, C. Wang, and G. Selli, "Memory DIMM DC Power Distribution Analysis and Design," IEEE Int. Electronic Components and Technology Conf., Electromagnetic Compatibility, 2003, pp. 597-602.
11 K. R. Lee, S. K. Kim, "Study of the Propagation Model considering Refractive Channel Environment between Korea and Japan," J. of the Korea Institute of Electronic Communication Sciences, vol. 8, no. 1, Jan. 2013. pp.49-54   과학기술학회마을   DOI