Browse > Article
http://dx.doi.org/10.6113/TKPE.2016.21.1.1

Characteristics Analysis of Segmental Rotor Type 3-Phase SRMs  

Xu, Zhenyao (Dept. of Mechatronics Engineering, Kyungsung Univ.)
Lee, Dong-Hee (Dept. of Mechatronics Engineering, Kyungsung Univ.)
Ahn, Jin-Woo (Dept. of Mechatronics Eng., Kyungsung Univ.)
Publication Information
The Transactions of the Korean Institute of Power Electronics / v.21, no.1, 2016 , pp. 1-9 More about this Journal
Abstract
In this study, two types of switched reluctance motors (SRMs) with segmental rotors are presented in detail. The first is a 6/5 segmental rotor type, whereas the second is a 12/8 segmental rotor type. Both motor types have the same stator, rotor, and winding configurations. The stator is constructed with special stator poles, namely, exclusively designed exciting and auxiliary poles. The rotor is constructed from a series of discrete segments, each of which is embedded into the nonmagnetic isolator. The windings are only wound on the exciting poles, and no winding is wound on the auxiliary poles. Given these configurations, short flux paths and high flux-linkage utilization rate are achieved in the proposed motors, which may reduce the magnetomotive force requirement and increase the electrical utilization of a machine. To verify the effectiveness of the proposed motors, their characteristics, such as magnetic flux distribution, flux-linkage, torque, radial force, and efficiency, are analyzed and compared with those of a conventional 12/8 SRM. Meanwhile, two prototypes, one for each proposed segmental rotor type, are also designed and manufactured. Finally, the validity of the proposed motors is further verified by test results.
Keywords
Switched reluctance motor; Electric machines; Segmental rotor; Energy efficiency; Cooling fans;
Citations & Related Records
Times Cited By KSCI : 2  (Citation Analysis)
연도 인용수 순위
1 D. H. Lee, Z. G. Lee, J. N. Liang, and J. W. Ahn, "Single-phase SRM drive with torque ripple reduction and power factor correction," IEEE Transaction on Industry Applications, Vol. 43, No. 6, pp. 1578-1587, Nov./Dec. 2007.   DOI
2 B. Bilgin, A. Emadi, and M. Krishnamurthy, "Comprehensive evaluation of the dynamic performance of a 6/10 SRM for traction application in PHEVs," IEEE Transactions on Industrial Electronics, Vol. 60, No. 7, pp. 2564-2575, Jul. 2013.   DOI
3 S. M. Yang and J. Y. Chen, "Controlled dynamic braking for switched reluctance motor drives with a rectifier front end," IEEE Transactions on Industrial Electronics, Vol. 60, No. 11, pp. 4913-4919, Nov. 2013.   DOI
4 B. Bilgin, A. Emadi, and M. Krishnamurthy, "Design considerations for switched reluctance machines with a higher number of rotor poles," IEEE Transactions on Industrial Electronics, Vol. 59, No. 10, pp. 3745-3756, Oct. 2012.   DOI
5 D. H. Lee, T. H. Pham, and J. W. Ahn, "Design and operation characteristics of four-two pole high-speed SRM for torque ripple reduction," IEEE Transaction on Industrial Electronics, Vol. 60, No. 9, pp. 3637-3643, Sep. 2013.   DOI
6 D. H. Lee and J. W. Ahn, "Design and analysis of hybrid stator bearingless SRM," Journal of Electrical Engineering & Technology., Vol. 6, No. 1, pp. 94-103, Jan. 2011.   DOI
7 B. C. Mecrow, J. W. Finch, E. A. EI-Kharashi, and A. G. Jack, "Switched reluctance motors with segmental rotors," IEE Proceedings of Electric Power Applications, Vol. 149, No. 4, pp. 245-254, Jul. 2002.   DOI
8 J. Oyama, T. Higuchi, T. Abe, and K. Tanaka, "The fundamental characteristics of novel switched reluctance motor with segment core embedded in aluminum rotor block," Journal of Electrical Engineering & Technology, Vol. 1, No. 1, pp. 58-62, 2006.   DOI
9 T. Higuchi, K. Suenaga, and T. Abe, "Torque ripple reduction of novel segment type switched reluctance motor by increasing phase number," in International Conference on Electrical Machine and Systems (ICEMS 2009), pp. 1-4, Nov. 15-18, 2009.
10 T. Higuchi, Y. Nakao, and T. Abe, "Characteristics of a novel segment type SRM with 2-step slide rotor," in International Conference on Electrical Machine and Systems (ICEMS 2009), pp. 1-4, Nov. 15-18, 2009.
11 N. Vattikuti, V. Rallabandi, and B. G. Fernandes, "A novel high torque and low weight segmented switched reluctance motor," in IEEE Power Electronics Specialists Conference, pp. 1223-1228, Jun. 15-19, 2008.
12 B. C. Mecrow, E. A. EI-Kharashi, J. W. Finch, and A. G. Jack, "Preliminary performance evaluation of switched reluctance motors with segmental rotors," IEEE Transactions on Energy Conversion, Vol. 19, No. 4, pp. 679-686, Dec. 2004.   DOI
13 X. Y. Chen, Z. Q. Deng, X. L. Wang, J. J. Peng, and X. S. Li, "New designs of switched reluctance motors with segmental rotors," in 5th IET International Conference on Power Electronics, Machines and Drives (PEMD 2010), pp. 1-6, Nov. 15-18, 2010.
14 X. Y. Chen, Z. Q. Deng, J. J. Peng, and X. S. Li, "Comparison of two switched reluctance motors with bipolar excitation," in 5th IET International Conference on Power Electronics, Machines and Drives (PEMD 2010), pp. 1-6, Nov. 15-18, 2010.
15 B. C. Mecrow, E. A. EI-Kharashi, J. W. Finch, and A. G. Jack, "Segmental rotor switched reluctance motors with single-tooth windings," IEE Proceedings of Electric Power Applications, Vol. 150, No. 5, pp. 591-599, Sep. 2003.   DOI
16 Z. Y. Xu and J. W. Ahn, "A novel 6/5 segmental rotor type switched reluctance motor: concept, design and analysis," in 2013 International Conference on Electrical Machines and Systems (ICEMS 2013), pp. 582-585, Oct. 26-29, 2013.
17 Z. Y. Xu, D. H. Lee, and J. W. Ahn, "Design of a novel 6/5 segmental rotor type switched reluctance motor," in 2014 IEEE Industry Application Society Annual Meeting, pp. 1-7, Oct. 5-9, 2014.