Browse > Article
http://dx.doi.org/10.6113/TKPE.2013.18.3.205

Hall Sensor Fault Detection and Fault-Tolerant Control of High-Speed PMSM Drive System  

Jang, Myung-Hyuk (Willings Co., Ltd.)
Lee, Kwang-Woon (Dept. of Electronic Engineering, Mokpo Nat'l Maritime Univ.)
Publication Information
The Transactions of the Korean Institute of Power Electronics / v.18, no.3, 2013 , pp. 205-210 More about this Journal
Abstract
This paper presents a novel hall sensor fault detection and fault-tolerant control method for a high-speed permanent magnet synchronous motor (PMSM) drive system. A phase locked loop (PLL) type position estimator is used with a conventional interpolation based rotor position estimator to reduce position errors due to misalignment of hall sensors. The expected trigger time of hall sensor's output is used for detecting hall sensor fault condition and the PLL type position estimator is reconfigured for fault-tolerant control at the hall sensor fault condition. The proposed method can minimize current ripples during the transition from sensored control using hall sensors to sensorless control. Experimental results have been proposed to prove the validity of the proposed method.
Keywords
hall sensor fault detection; fault-tolerant control; PMSM;
Citations & Related Records
Times Cited By KSCI : 2  (Citation Analysis)
연도 인용수 순위
1 Bon-Ho Bae, Seung-Ki Sul, Jeong-Hyeck Kwon, Ji-Seob Byeon, "Implementation of sensorless vector control for super-high-speed PMSM of turbo-compressor," IEEE Tans. Ind. Applicat., Vol. 39, pp. 811-818, May/Jun. 2003.   DOI   ScienceOn
2 Myoung-Ho Kim, Jung-Sik Yim, Seung-Ki Sul and Sung-Il Lim, "Implementation of Super High-speed Permanent Magnet Synchronous Machine Drive," Transactions of Korean Institute of Power Electronics, Vol. 13, No. 5, pp. 329-335, Oct. 2008.   과학기술학회마을
3 Kwang-woon Lee, "Position Sensor Fault Tolerant Control of Permanent Magnet Synchronous Generator," Transactions of Korean Institute of Power Electronics, Vol. 16, No. 4, pp. 351-357, Aug. 2011.   과학기술학회마을   DOI   ScienceOn
4 K. Rothenhagen, and F. W. Fuchs, "Doubly fed induction generator model-based sensor fault detection and control loop reconfiguration," IEEE Trans. Ind. Electron., Vol. 56, No. 10, pp. 4229-4283, 2009.   DOI   ScienceOn
5 S. Morimoto, M. Sanada, and Y. Takeda, "High-Performance Current-Sensorless Drive for PMSM and SynRM With Only Low-Resolution Position Sensor," IEEE Trans. on Ind. Applicat., Vol. 39, No. 3, pp. 792-801, May/June, 2003.   DOI   ScienceOn
6 M.C. Harke, G.D. Donato, F.G. Capponi, T.R. Tesch, and R.D. Lorenz, "Implementation Issues and Performance Evaluation of Sinusoidal, Surface-Mounted PM Machine Drives With Hall-Effect Position Sensors and a Vector-Tracking Observer," IEEE Trans. on Ind. Applicat., Vol. 44, No. 1, pp. 161-173, Jan./Feb., 2003.
7 S. Morimoto, K. Kawamotor, M. Sanada, and Y. Takeda, "Sensorless control strategy for salient-pole PMSM based on extended EMF in rotating reference frame," IEEE Trans. Ind. Appl., Vol. 38, No. 4, pp. 1054-1061, Jul./Aug., 2002.   DOI   ScienceOn
8 Bon-Ho Bae, Seung-Ki Sul, "A Compensation Method for Time Delay of Full-Digital Synchronous Frame Current Regulator of PWM AC Drives," IEEE Trans. Ind. Applicat., Vol. 39. No. 3, pp. 802-810, May/June, 2003.