1 |
T. Sukegawa, K. Kamiyama, K. Mizuno, T. Matsui, and T. Okuyama, "Fully digital, vector-controlled PWM VSI-fed strategy," IEEE Trans. Ind. Applicat, Vol. 27, No. 3, pp. 552-559, 1991.
DOI
|
2 |
A. Munoz-Garcia and T. A. Lipo, "On-line dead-time compensation technique for open-loop PWM-VSI drives," in Proc. IEEE Applied Power Elect. Conf., pp. 95-100, Feb. 1998.
|
3 |
L. Chen, and F. Z. Peng, "Dead-time elimination for voltage source inverters," IEEE Trans. Power Elec., Vol. 23, No. 2, pp. 574-580, 2008.
DOI
|
4 |
N. Urasaki, T. Senjyu, K. Uezato, and T. Funabashi, "Adaptive dead-time compensation strategy for permanent magnet synchronous motor drive," IEEE Trans. Energy Conv., Vol. 22, No. 2, pp. 271-280, 2007.
DOI
|
5 |
P. C. Krause, Analysis of Electric Machinery. New York: McGraw-Hill, 1986.
|
6 |
K. H. Kim, "Model reference adaptive control-based adaptive current control scheme of a PM synchronous motor with an improved servo performance," IET Electr. Power Appl., Vol. 3, No. 1, pp. 8-18, 2009.
DOI
|
7 |
TMS320F28335 Digital Signal Controller (DSC) - Data Manual. Texas Instrument, 2008.
|
8 |
H. W. van der Broeck, H. C. Skudelny, and G. V. Stanke, "Analysis and realization of a pulsewidth modulator based on voltage space vectors," IEEE Trans. Ind. Appl., Vol. 24, No. 1, pp. 142-150, 1988.
DOI
ScienceOn
|
9 |
H. W. Kim, M. J. Youn, K. Y. Cho, and H. S. Kim, "Nonlinearity estimation and compensation of PWM VSI for PMSM under resistance and flux linkage uncertainty," IEEE Trans. Contr. Syst. Technol., Vol. 14, No. 4, pp. 589-601, 2006.
DOI
|
10 |
S. H. Hwang, and J. M. Kim, "Dead time compensation method for voltage-fed PWM inverter," IEEE Trans. Energy Conv., Vol. 25, No. 1, pp. 1-10, 2010.
DOI
|
11 |
S. Y. Kim, W. Lee, M. S. Rho, and S. Y. Park, "Dead time compensation method for voltage-fed PWM inverter," IEEE Trans. Ind. Elec., Vol. 57, No. 5, pp. 1609-1614, 2010.
DOI
|
12 |
H. S. Kim, K. H. Kim, and M. J. Youn, "On-line dead-time compensation method based on time delay control," IEEE Trans. Contr. Syst. Technol., Vol. 11, No. 2, pp. 279-285, 2003.
DOI
ScienceOn
|