Browse > Article
http://dx.doi.org/10.5302/J.ICROS.2012.18.1.013

Marine Engine State Monitoring System using DPQ in CAN Network  

Lee, Hyun (Pusan National University)
Lee, Jun-Seok (Pusan National University)
Lee, Jang-Myung (Pusan National University)
Publication Information
Journal of Institute of Control, Robotics and Systems / v.18, no.1, 2012 , pp. 13-20 More about this Journal
Abstract
This paper proposes a marine engine state monitoring system using a DPQ (Distributed Precedence Queue) mechanism which collects the state of bearings, temperature and pressure of engine through the CAN network. The CAN is developed by Bosch Corp. in the early 1980' for automobile network. The data from various sensors attached in the marine engine are converted to digital by the analog to digital converter and formatted to fit the CAN protocol at the CAN module. All the CAN modules are connected to the SPU (Signal Processing Unit) module for the efficient communication and processing. This design reduces the cost for wiring and improves the data transmission reliability by recognizing the sensor errors and data transmission errors. The DPQ mechanism is newly developed for the performance improvement of the marine engine system, which is demonstrated through the experiments.
Keywords
CAN; ESMS (Engine State Monitoring System); DPQ;
Citations & Related Records
Times Cited By KSCI : 1  (Citation Analysis)
Times Cited By SCOPUS : 0
연도 인용수 순위
1 M. Farsi, K. Ratcliff, and M. Barbosa, "An overview of controller area network," Computing and Control Engineering Journal, vol. 10, no. 3, pp. 113-120, 1999.   DOI   ScienceOn
2 C. Guerreoro, "Hardware support for fault tolerance in triple redundant CAN controllers," Electronics, Circuits and System, 9th International Conference, vol. 2, pp. 457-460, 2002.
3 C. Guerreoro, "Design and implementation of a redundancy manager for triple redundant CAN controllers," IEEE 28th Annual Conference of the Industrial Electronics Society, vol. 3, pp. 2294-2299, Nov. 2002.
4 R. I. Davis and A. Burns, "Robust priority assignment for message on CAN (Controller Area Network)," 26 November 2008. Springer Science+Business Media, LLC 2008.
5 E. Tovar, F. Pacheco, and N. Cruz, "A scalable and efficient approach for obtaining measurements in CAN-based control system," IEEE Transactions on Industial Information, vol. 4, no. 2, May 2008.
6 J. M. Giron-Sierra, C. Insaurralde, M. Seminario, J. F. Jimenez, and P. Klose, "CANbus-based distributed fuel system with smart components," IEEE Transactions on Aerospace and Electronic System, vol. 44, no. 3 July 2008.
7 Jadsonlee Da Silva Sa, Jaidilson Jo Da Silva, Miguel Goncalves Wanzeller, and Jose Sergio Da Rocha Neto, "Monitoring of temperature using smart sensors based on CAN architecture," Proc. of the 15th International Conference on Electronics, 2005.
8 http://www.eskorea.net/
9 M. H. Kim, J. G. Lee, S. Lee, and K. C. Lee, "A study on distributed message allocation method of CAN system with dual communication channels," Journal of Institute of Control, Robotics and System, pp. 1018-1023, Oct. 2010.
10 J. W. Jung and D. S. Kim, "Real-time synchronization algorithm for industrial hybrid networks: CAN and sensor network," Journal of Institute of Control, Robotics and System, vol. 16, no. 2, Feb. 2010.
11 http://www.doosanengine.com/
12 J. G. Lee, M. H. Kim, J. H. Park, S. Lee, and K. C. Lee, "Implementation of IEEE 1451 based dual CAN module for fault tolerance of in-vehicle networking system," Journal of Institute of Control, Robotics and System, vol. 15, no. 7, Jul. 2010.   과학기술학회마을   DOI
13 H. Cao, J. Ma, G. Zhang, J. Zhang, and G. RenMarine, "Marine main engine remote control system with redundancy CAN Bus based on distributed processing technology," International Conference on Intelligent Control and Information Processing, Aug. 2010.
14 Bosch, "CAN Specification Version 2.0.," Robert Bosch GmbH. Stuttgard, 1991.
15 International Standard Organization, "Road - vehicles Interchange of digital information - Controller area network for high-speed communication," ISO 11898, Nov. 1993.
16 G. Cena and A. Valenzano, "An improved CAN fieldbus for industrial application," IEEE Trans. on Industrial Electronics, vol. 44, no. 4, Aug. 1997.
17 S. Corriganm, Intriduction to the Controller Area Network, TI, Application Report. Texas, 2002.
18 H. Hilmer, H. D. Kochs, and E. Dittmar, "A fault-tolerant communication architecture for real-time control system," IEEE International Workshop on Factory Communication System, pp. 111-118, 1997.