Browse > Article
http://dx.doi.org/10.7736/KSPE.2014.31.1.35

A Study on the Machinability Evaluation According to Lubrication Conditions and Taper Angle for Turning of SCM440  

Choi, Min-Seok (Department of Mechanical Engineering, KAIST)
Kim, Dong-Hyeon (School of Mechanical Engineering, Changwon National Univ.)
Hwang, Seong-Ju (School of Mechanical Engineering, Changwon National Univ.)
Lee, Choon-Man (School of Mechanical Engineering, Changwon National Univ.)
Publication Information
Journal of the Korean Society for Precision Engineering / v.31, no.1, 2014 , pp. 35-42 More about this Journal
Abstract
Recently, in industry field, many researchers are looking for ways to reduce the use of lubricant because of environmental and economical reasons. MQL lubrication is one of many lubrication technologies. The aim of this study is to evaluate the machinability considering lubrication methods and taper angles of workpieces for turning of SCM440. Workpieces of two shapes such as workpiece with and without taper angle are used. And two lubrication methods such as MQL and Wet have been considered. And cutting force and surface roughness are used as characteristic values. Cutting speed, feed rate, injection angle and distance are used as design parameters. The characteristic values were statistically analyzed by Taguchi method. From the results, main effects plot and importance of each parameter according to conditions are analyzed. Finally, this study has been suggested the optimum machining conditions according to the lubrication methods, machining conditions and shape of workpiece.
Keywords
Turning; MQL; Cutting Force; Surface Roughness; Taguchi Method;
Citations & Related Records
Times Cited By KSCI : 8  (Citation Analysis)
연도 인용수 순위
1 Choi, C. H., Kim, D. H., and Lee, C. M., "A Study on Cutting Characteristic of Tapered Groove in Turning," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 10, No. 6, pp. 27-32, 2011.
2 Lee, S. B., "Taguchi Method Applying by using Minitab," Eretech Inc, pp. 37-40, 2006.
3 Lee, S. H., "Data Analysis of Engineering Statistics by using Minitab," Eretec Inc, pp. 855-873, 2008.
4 Eretech, "MINITAB Realese 14," Eretec Inc, pp. 689-704, 2005.
5 Rahman, M., Senthil Kumar, A., and Salam, M. U., "Experimental Evaluation on the Effect of Minimal Quantities of Lubricant in Milling," International Journal of Machine Tool & Manufacture, Vol. 42, No. 5, pp. 539-547, 2002.   DOI   ScienceOn
6 Diniz, A. E. and Micaroni, R., "Cutting Conditions for Finish Turning Process Aiming: the Use of Dry Cutting," International Journal of Machine Tools and Manufacture, Vol. 42, No. 8, pp. 899-904, 2002.   DOI   ScienceOn
7 Kang, J. H., "Environmentally Conscious Machining Technology and Machine-tool," J. Korean Soc. Precis. Eng., Vol. 9, No. 1, pp. 9-17, 2000.   과학기술학회마을
8 Lee, K. H. and Kim, J. Y., "Overview and Future Direction of Cleaner Production System," J. Korean Soc. Precis. Eng., Vol. 20, No. 8, pp. 12-16, 2003.   과학기술학회마을
9 Hwang, Y. K., Chung, W. J., Jung, J. Y., and Lee, C. M., "A Study on the Improvement of Cutting Force and Surface Roughness in MQL turning," Transactions of the Korean Society of Machine Tool Engineers, Vol. 15, No. 4, pp. 83-91, 2006.   과학기술학회마을
10 Hwang, Y. K., Chung, W. J., and Lee, C. M., "Experimental Study of Cutting Force and Surface Roughness Prediction in MQL Turning of Al 6061," J. Korean Soc. Precis. Eng., Vol. 25, No. 6, pp. 159-167, 2008.   과학기술학회마을
11 Hwang, J., Chung, E. S., and Hwang, D. C., "A Study on the Environmentally Conscious Machining," J. Korean Soc. Precis. Eng., Vol. 20, No. 2, pp. 50-57, 2003.   과학기술학회마을
12 Dhar, N. R., Islam, M. W., Islam, S., and Mithu, M. A. H., "The Influence of Minimum Quantity of Lubrication on Cutting Temperature, Chip and Dimensional Accuracy in Turning AISI-1040 Steel," Journal of Materials Processing Technology, Vol. 171, No. 1, pp. 93-99, 2006.   DOI   ScienceOn
13 Hwang, Y. K. and Lee, C. M., "Surface Roughness and Cutting Force Prediction in MQL and Wet Turning Process of AISI 1045 using Design of Experiments," Journal of Mechanical Science and Technology, Vol. 24, No. 8, pp. 1669-1677, 2010.   과학기술학회마을   DOI
14 Hwang, Y. K., Lee, C. M., and Park, S. H., "Evaluation of Machinability according to the Changes in Machine Tools and Cooling Lubrication Environments and Optimization of Cutting Conditions Using Taguchi Method," Int. J. Precis. Eng. Manuf., Vol. 10, No. 3, pp. 65-73, 2009.   과학기술학회마을   DOI   ScienceOn
15 Lee, J. H., Lee, S. J., Lee, S. W., and Choi, H. J., "Characteristics of Environment-friendly Semi-dry Turning," J. Korean Soc. Precis. Eng., Vol. 19, No. 10, pp. 221-226, 2002.   과학기술학회마을
16 Kim, D. H., Kang, D. W., Cha, N. H., and Lee, C. M., "Experimental Study on the Optimized Lubrication Conditions in MQL Turning of Workpieces with Taper Angle," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 12, No. 1, pp. 63-69, 2013.
17 Kim, D. H., Choi, J. Y., and Lee, C. M., "A Basic Study on the Surface Roughness in Turning Process Considering Taper Angle Variation," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 10, No. 6, pp. 16-21, 2011.