Browse > Article
http://dx.doi.org/10.7736/KSPE.2012.29.9.938

Finite Element Analysis for Performance Evaluation of Type III Hydrogen Pressure Vessel for the Clean Tech Fuel Cell Vehicles  

Son, Dae-Sung (School of Mechanical Engineering, Chung-Ang Univ.)
Chang, Seung-Hwan (School of Mechanical Engineering, Chung-Ang Univ.)
Publication Information
Journal of the Korean Society for Precision Engineering / v.29, no.9, 2012 , pp. 938-945 More about this Journal
Abstract
To design and estimate material failures of Type III pressure vessels, which have excellent stability and performance, various modeling techniques have been introduced. This paper provided a hybrid modeling technique composed of ply-based modeling for a cylinder part and laminate-base modeling technique for a dome part for enhancing modeling efficiency. The ply-based modeling technique provided accurate ply stresses directly for predicting material failure, on the other hand, additional manipulations in stress calculations, which may cause some errors, were needed for the case of the laminate-based modeling technique. The ply stresses in fiber, transverse and in-plane shear directions were compared with the corresponding material strengths to predict material failure.
Keywords
Type III Hydrogen Pressure Vessels; Laminate Property; Ply Property; Carbon/Epoxy Composite;
Citations & Related Records
Times Cited By KSCI : 7  (Citation Analysis)
연도 인용수 순위
1 Kim, C. U., Kang, J. H., Hong, C. S., and Kim, C. G., "Optimal design of filament wound structures under internal pressure based on the semi-geodesic path algorithm," Composite Structures, Vol. 67, No. 4, pp. 443-452, 2005.   DOI
2 Park, M. G., Cho, S. K., and Chang, S. H., "A study on the variation of in-plane and out-of-plane properties of T800 carbon/epoxy composites according to the forming pressure," Journal of the Korean Society for Composite Materials, Vol. 23, No. 6, pp. 61-66, 2010.   과학기술학회마을   DOI
3 Webster, G. A. and Ezeilo, A. N., "Residual stress distributions and their influence on fatigue lifetimes," International Journal of Fatigue, Vol. 23, No. 1, pp. S375-S383, 2001.
4 Jahromi, B. H., Ajdari, A., Nayeb-Hashemi, H., and Vaziri, A., "Autofrettage of layered and functionally graded metal-ceramic composite vessels," Composite Structures, Vol. 92, No. 8, pp. 1813-1822, 2010.   DOI
5 Son, D. S., Bae, J. H., and Chang, S. H., "A study on the bonding strength of co-cured T800/epoxy composite-aluminum single lap joint according to the forming and additional pressures," Journal of the Korean Society for Composite Materials, Vol. 24, No. 5, pp. 23-28, 2011.   과학기술학회마을   DOI
6 Lee, D. G., Jeong, M. Y., Choi, J. H., Cheon, S. S., Chang, S. H., and Oh, J. H., "Composite materials," Hongrung Publishing Company, pp. 51-67, 2007.
7 Park, H. S., Lee, W. H., Keum, J. H., Choi, J. H., Koo, J. M., and Seok, C. S., "The evaluation of fracture toughness for woven carbon fibered reinforced composite materials," J. of the KSPE, Vol. 27, No. 10, pp. 69-76, 2010.   과학기술학회마을
8 Kim, E. S., Kim, J. H., Park, Y. S., Kim, C., and Choi, J. C., "Development of an automated design system of CNG composite vessel using steel liner manufactured by D.D.I process," J. of the KSPE, Vol. 20, No. 1, pp. 205-213, 2003.   과학기술학회마을
9 Zheng, J., Liu, X., Xu, P., Liu, P., Zhao, Y., and Yang, J., "Development of high pressure gaseous hydrogen storage technologies," International Journal of Hydrogen Energy, Vol. 37, No. 1, pp. 1048-1057, 2012.   DOI
10 Kabir, M. Z., "Finite element analysis of composite pressure vessels with a load sharing metallic liner," Composite Structures, Vol. 49, No. 3, pp. 247-255, 2000.   DOI
11 Hu, J., Chen, J., Sundararaman, S., Chandrashekhara, K., and Chernicoff, W., "Analysis of composite hydrogen storage cylinders subjected to localized flame impingements," International Journal of Hydrogen Energy, Vol. 33, No. 11, pp. 2738-2746, 2008.   DOI
12 Choi, J. H., Kang, M. S., Shin, I. H., Koo, J. M., and Seok, C. S., "Evaluation of Residual Strength in Aircraft Composite Under Impact Damage," J. of the KSPE, Vol. 27, No. 2, pp. 94-101, 2010.
13 Hwang, T. K., Park, J. B., Kim, H. G., Doh, Y. D., and Moon, S. I., "Dome Shape Design and Performance Evaluation of Composite Pressure Vessel," Journal of the Korean Society for Composite Materials, Vol. 20, No. 4, pp. 31-41, 2007.   과학기술학회마을
14 Xu, P., Zheng, J. Y., and Liu, P. F., "Finite element analysis of burst pressure of composite hydrogen storage vessels," Materials and Design, Vol. 30, No. 7, pp. 2295-2301, 2009.   DOI
15 Kim, Y. S., Kim, L. H., and Park, J. S., "The effect of composite damage on fatigue life of the high pressure vessel for natural gas vehicles," Composite Structures, Vol. 93, No. 11, pp. 2963-2968, 2011.   DOI
16 Neelis, M. L., Kooi, H. J., and Geerlings, J. J. C., "Exergetic life cycle analysis of hydrogen production and storage systems for automotive applications," International Journal of Hydrogen Energy, Vol. 29, No. 5, pp. 537-545, 2004.   DOI
17 Aceves, S. M., Berry, G. D., Martinez-Frias, J., and Espinosa-Loza, F., "Vehicular storage of hydrogen in insulated pressure vessels," International Journal of Hydrogen Energy, Vol. 31, No. 15, pp. 2274-2283, 2006.   DOI
18 Ahn, S. H., Jung, W. K., and Kim, H. J., "Development trends of ceramic composite armors for combat vehicles," J. of the KSPE, Vol. 27, No. 2, pp. 94-101, 2010.