Browse > Article

Optimization of the Deflection for large Disk type Gear of Auto Phoropter  

Jung, Tae-Sung (Department of Mechanical Design, Inha Technical College)
Publication Information
Journal of the Korean Society for Precision Engineering / v.28, no.3, 2011 , pp. 370-376 More about this Journal
Abstract
Recently, the application range of plastic gears is widely expanding by the development of engineering plastics with good mechanical properties. Plastic gears have excellent performances such as light weight, water resistance and vibration absorbing ability for metallic gears. In this study, the optimization of injection molding process was done for the large disk type plastic gears of auto phoropter. Design Of Experiment (Taguchi method) was adopted to find a tendency of molding conditions that influence the flatness of disk type gear. Four main factors for molding conditions were selected based on injection temperature, filling time, packing pressure and mold temperature. Also, Filling, packing and cooling analyses were carried out to evaluate Z directional deflection of large disk type gear by using the simulation software (Moldflow) based on the DOE. From the results, it was found that the injection temperature and packing pressure are the most sensitive parameters for the Z directional deflection of large disk type gears.
Keywords
Disk type Plastic Gear; Auto Phoropter; Design of Experiments; Warpage; ANOVA; S/N Ratio;
Citations & Related Records
Times Cited By KSCI : 4  (Citation Analysis)
연도 인용수 순위
1 Chong, T. H., Ha, Y. W. and Takahashi, H., "Injection Molded Microcellular Plastic Gear(II)-Characteristics of the Counter Pressurized Microcellular Plastic Gear-," Transactions of the Korean Society of Mechanical Engineers A, Vol. 29, No. 5, pp. 655-662, 2005.   DOI
2 Kim, B. H., Jang, W. J., Kim, J. H., Cho, J. H., Park, Y. H. and Choe, S. J., "Application of CAE in Injection Molding Process," HWAHAK KONGHAK, Vol. 41, No. 5, pp. 577-584, 2003.
3 Lee, S. C., Kim, C. H., Kwon, O. K. and Huh, Y. J., "Cavity Design for Injection Molded Gears by the Compensation Method of Design Parameters," Transactions of the Korean Society of Mechanical Engineers A, Vol. 20, No. 10, pp. 3124-3151, 1996.
4 Chong, T. H., Moon, C. K. and Ha, Y. W., "Strength Estimation of Injection Molded Plastic Stepped Spur Gear," Transactions of the Korean Society of Machine Tool Engineers, Vol. 15, No. 3, pp. 17-23, 2006.
5 Kwon, Y. S., Kwak, J. S. and Jeong, Y. D., "Effect Analysis and Optimization of Injection Molding Process On Shrinkage of Plastic Gear," Proc. of KSMPE Autumn Conference, pp. 257-261, 2006.
6 Kwon, Y. S., Kwak, J. S. and Jeong, Y. D., "Optimization of Injection Molding Process for Gear Using Design of Experiments," Proc. of KSPE Autumn Conference, pp. 113-114, 2006.
7 Chong, T. H., Kang, K. K. and Ha, Y. W., "Fatigue Life Evaluation of Plastic Gear," Proc. of KSMTE Spring Conference, pp. 239-245, 2005.
8 Kwon, Y. S. and Jeong, Y. D., "Development of the injection mold structure for internal gears," Journal of the Korea Society for Power System Engineering, Vol. 12, No. 6, pp. 78-82, 2008.
9 Chong, T. H. and Ha, Y. W., "Injection Molded Microcellular Plastic Gear(I)- Process Design for the Microcellular Plastic Gear-," Transactions of the Korean Society of Mechanical Engineers A, Vol. 29, No. 5, pp. 647-654, 2005.   DOI
10 Min, B. H., "Development of Engineering Plastic Gear Based on Injection Molding Process," Journal of the Korean Society for Precision Engineering, Vol. 16, No. 8, pp. 71-78, 1999.