1 |
Kang, D., Shin, H., Kim, J. and Park, Y., "Design and Analysis of Column Type Sensing Element for Large Compact Load Cell," Trans. of the KSME A, Vol. 27, No. 4, pp. 601-607, 2003.
과학기술학회마을
DOI
|
2 |
Lee, T. H., Lee, T. H., Byun, C. W. and Park, J. K., "Optimal Design of High-Capacity Column-Type Load Cell Using Response Surface Method," Proc. of KSPE Autumn Conference, pp. 754-758, 2002.
|
3 |
Lee, M. J., Ham, D. S., Lee, S. W. and Han, G. J., "Shape Design of Indirect Adhesion type Load cell for Container Crane," Proc. of KSPE Autumn Conference, pp. 401-402, 2007.
|
4 |
Joo, J. W., Na, K. S. and Kang, D. I., "Design and fabrication of a six-component force/moment sensor," Measurement, Vol. 32, No. 2, pp. 125-133, 2002.
DOI
ScienceOn
|
5 |
Kim, G., Kang, D. and Rhee, S., "Design and evaluation of a six-component load cell," Sensors and Actuators A: Physical, Vol. 77, No. 3, pp. 209-220, 1999.
DOI
ScienceOn
|
6 |
Zwemmer, R., Quartel, A. and Veltman, D. L., "Development and Operational Aspects of a Signal Transfer System for Use in Wind Tunnel Propeller Models," 19th International Congress on Instrumentation in Aerospace Simulation Facilities, pp. 353-359, 2001.
|
7 |
Rhew, R. D., "A Fatigue Study of Electrical Discharge Machine (EDM) Strain-Gage Balance Materials," International Congress on Instrumentation in Aerospace Simulation Facilities, pp. 477-487, 1989.
|
8 |
Park, S. H., "Modern design of experiments," Minyoung-Sa, pp. 413-435, 2003.
|
9 |
ANSYS, http://www.ansys.com/
|
10 |
Seo, S. K., "MINITAB Reliability Analysis," Eretec, 2009.
|
11 |
Zahavi, E., "Fatigue Design," A Solomon Press Book, 1996.
|
12 |
Han, M. and Cho, J., "The Analysis of Fatigue Damage in Structure under Variable Load," Transaction of the Korean Society of Automotive Engineers, Vol. 12, No. 4, pp. 85-93, 2004.
|
13 |
Vos, H. B., "Strain Gauge Balance Development at NLR," National Aerospace Laboratory NLR, 1996.
|
14 |
Karkehabadi, R., Rhew, R. D. and Hope, D. J., "Study and Analyses on the Structural Performance of a Balance," NASA TM-213263, 2004.
|
15 |
Erm, L. P., "Development of a Two-Component Strain Gauge Balance Load Measurement System for the DSTO Water Tunnel," Air Vehicles Division Defence Science and Technology Organization, DSTO-TR-1835, 2006.
|
16 |
Norman, T. R., Shinoda, P. M., Kitaplioglu, C., Jacklin, S. A. and Sheikman, A., "Low-Speed Wind Tunnel Investigation of a Full-Scale UH-60 Rotor System," NASA Ames Research Center, 2002.
|
17 |
Kang, D. I., Kim, G. S., Jeoung, S. Y. and Joo, J. W., "Design and Evaluation of Binocular Type Sixcomponent Load Cell by Using Experimental Technique," Trans. of the KSME A, Vol. 21, No. 11, pp. 1921-1930, 1997.
|