Micromachining Using Hybrid of Laser Beam and Electrical Discharge Machining |
Kim, San-Ha
(School of Mechanical & Aerospace Engineering, Seoul National Univ.)
Chung, Do-Kwan (School of Mechanical & Aerospace Engineering, Seoul National Univ.) Kim, Bo-Hyun (Department of Mechanical Engineering, Soongsil Univ.) Oh, Kwang-Hwan (School of Information & Mechatronics, GIST) Jeong, Sung-Ho (School of Information & Mechatronics, GIST) Chu, Chong-Nam (School of Mechanical & Aerospace Engineering, Seoul National Univ.) |
1 | Tonshoff, H. K., Alvensleben, F., Ostendprf, A., Kamlage, G. and Nolte, S., "Micromachining of Metals Using Ultrashort Laser Pulses," International Journal of Electrical Machining, No. 4, pp. 1-6, 1999 |
2 | Chung, D. K., Kim, B. H. and Chu, C. N., "Micro Electrical Discharge Milling Using Deionized Water as a Dielectric Fluid," Journal of Micromechanics and Microengineering, Vol. 17, No. 5, pp. 867-874, 2007 DOI ScienceOn |
3 | Allen, D. M. and Huang, S. X., "The Reduction of Tool Wear and Machining Time for the Micro-Electro Discharge Machining of Micro-holes by Using Copper Vapour Laser Machining as a Roughing Process," International Journal of Electrical Machining, No. 2, pp. 9-11, 1997 |
4 | Lee, B. U., Yi, S. M., Kim, B. H. and Chu, C. N., "Fabrication of 3D Micro structure Using Micro Electrical Discharge Milling," Journal of the KSPE, Vol. 21, No. 9, pp. 41-47, 2004 과학기술학회마을 |
5 | Meijer, J., Du, K., Gilner, A., Hoffmann, D., Kovalenko, V. S., Masuzawa, T., Ostendon, A., Poprawe, R. and Schulz, W., "Laser Machining by Short and Ultrashort Pulses, State of the Art and New Opportunities in the Age of the Photons," Annals of the CIRP, Vol. 51, No. 2, pp. 531-550, 2002 DOI ScienceOn |
6 | Li, L., Diver, C., Atkinson, J., Giedl-Wagner, R. and Helml, H. J., "Sequential Laser and EDM Microdrilling for Next Generation Fuel Injection Nozzle Manufacture," Annals of the CIRP, Vol. 55, No. 1, pp. 179-182, 2006 DOI ScienceOn |
7 | Tsai, Y. Y., Masuzawa, T. and Fujino, M., "Investigations on Electrode Wear in Micro-EDM," Proceedings of the International Symposium on Electromachining(ISEM XIII), pp. 719-726, 2001 |
8 | Yu, Z. Y., Masuzawa, T. and Fujino, M., "Micro-EDM for Three-Dimensional Cavities - Development of Uniform Wear Method- ," Annals of the CIRP, Vol. 47, No. 1, pp. 169-172, 1997 DOI ScienceOn |
9 | Masuzawa, T., Fujimoto, M. and Kobayashi, K., "Wire Electro-Discharge Grinding for Micro machining," Annals of the CIRP, Vol. 34, No. 1, pp. 431-434, 1985 DOI ScienceOn |