Browse > Article

Command Generation Method for High-Speed and Precise Positioning of Positioning Stage  

Jang, Joon-Won (Department of Mechatronics, Kumoh National Institute of Technology)
Park, Sang-Won (Department of Mechatronics, Kumoh National Institute of Technology)
Hong, Seong-Wook (School of Mechanical Engineering, Kumoh National Institute of Technology)
Publication Information
Journal of the Korean Society for Precision Engineering / v.25, no.10, 2008 , pp. 122-129 More about this Journal
Abstract
This paper deals with precise positioning of a high-speed positioning stage without inducing residual vibration by using an input shaping technique. Input shaping is well known to be a very effective tool for suppressing the residual vibration of flexible structures. However, the ordinary input shaping for positioning stages is designated mostly for velocity regulation, not for the residual vibration at the target position. The main difficulties in implementing input shaping along with precise positioning are the time delay caused by the servo system characteristics and the s-curve feature often employed in some motor controllers. This paper analyzes the dynamic responses of a single-mode-dominate stage system subjected to input shaping. A theoretical model is developed io investigate the nature of system. In order to overcome the difficulty, this paper proposes an improved input shaper based on modified command profile generation. The proposed method is proved effective through experiments and simulations.
Keywords
Input Shaping; Positioning Stage; Residual Vibration; Precise Positioning;
Citations & Related Records
Times Cited By KSCI : 1  (Citation Analysis)
연도 인용수 순위
1 Tseng, Y. T. and Liu, J. H., "High-speed abd Precise Positioning an X-Y Table," Control Engineering Practice, Vol. 11, No. 4, pp. 357-365, 2003   DOI   ScienceOn
2 Singhose, W. and Seering, W., "Command Generation for Dynamic Systems," Lulu.com, 2007
3 Lau, M. A. and Pao, L. Y., "Input Shaping and Time-optimal Control of Flexible Structures," Automatica 39, pp. 893-900, 2003   DOI   ScienceOn
4 Chang, P. H. and Park, J., "A Concurrent Design of Input Shaping Technique and a Robust Control for High-speed / High-precision Control of a Chip Mounter," Control Engineering Practice 9, pp. 1279-1285, 2001   DOI   ScienceOn
5 Park, C. H. and Lee, H. S., "Precision Positioning Technologies with Ball Screw," J. of the KSPE, Vol. 17, No. 12, pp. 26-33, 2000
6 Song, W. K., Choi, W. C., Cho, D. W. and Lee, E. S., "Precision Position Control of Feed Drives," Proc. of the KSPE Fall Conference, pp. 266-272, 1995
7 Park, S. W., Hong, S. W., Choi, H. S. and Singhose, W., "A Study on Dynamic Performance of Precise XY Stages Using Real-Time Input Shaping," Proc. of the 8th ISMTII, 2007
8 Park, S. W., Hong, S. W., Choi, H. S. and Singhose, W., "Discretization Effects of Real-Time Input Shaping in Residual Vibration Reduction for Precise XY Stage," Trans. of the KSMTE, Vol. 16, No. 4, pp. 71-78, 2007   과학기술학회마을
9 Dijkstra, B. G., Rambaratsingh, N. J., Scherer, C. W., Bosgra, O. H., Steinbuch, M. and Kerssemakers, S., "Input Design for Optimal Discrete Time Point-To-Point Motion of an Industrial XY-Positioning Table," Selected Topics in Signals, Systems and Control, Vol. 12, pp. 9-14, 2001
10 Kwac, L. K., Kim, J. Y., Yang, D. J., Ko, M. S., You, S. and Kim, K. T., "Optimal Design of Controller for Ultra-Precision Plane X-Y Stage," Proc. of the KSPE Spring Conference, pp. 342-347, 2002
11 Lee, C. H., "Ultraprecision Positioning Technology," J. of the KSPE, Vol. 17, No. 12, pp. 9-15, 2000
12 Bodson, M., "An Adaptive Algorithm for the Tuning of Two Input Shaping Methods," Proc. of the American Control Conference, pp. 1340-1344, 1997