1 |
Yoon, K. K., Lee, S. K., Kim, J. G., Shin, B. S., Choi, D. S., Whang, K. H. and Park, J. Y., 'Laser beam application and technology in micro machining,' Journal of the Korean Society for Precision Engineering, Vol. 17, No. 7, pp. 27-35, 2000
|
2 |
Shin, D. S., Lee, J. H., Suh, J. and Kim, T. H., 'Excimer laser induced ablation of PMMA and PET,' Journal of Korean Society of Laser Processing, Vol. 6, No. 1, pp. 33-40, 2003
|
3 |
Liu, Z. G., Song, H. W., Zheng, Z. H., Lu, S. Z., Yu, L. X. and Yang, L. M., 'Femtosecond laser induced photochemical reaction and configuration change of silver nanorod clusters in aqueous solution,' Colloids and Surfaces A: Physicochem. Eng. Aspects, Vol. 275, pp. 69-72, 2006
DOI
ScienceOn
|
4 |
Bauerle, D., Himmelbauer, M. and Arenholz, E., 'Pulsed laser ablation of polyimide: fundamental aspects,' Journal of Photochemistry and Photobiology A: Chemistry, Vol. 106, pp. 27-30, 1997
DOI
ScienceOn
|
5 |
Tunna, L., Kearns, A., O'Neill, W. and Sutcliffe, C. J., 'Micromachining of copper using Nd:YAG laser radiation at 1064, 532, and 355 nm wavelengths,' Optics & Laser Technology, Vol. 33, pp. 135-143, 2001
DOI
ScienceOn
|
6 |
Oh, B. K. and Kim, D. S., 'Numerical simulation of nanosecond pulsed laser ablation in air,' Journal of Korean Society of Laser Processing, Vol. 6, No. 3, pp. 37-45, 2003
|
7 |
Srinivasan, V., Smrtic, M. A. and Babu, S. V., 'Excimer Laser Etching of Polymers,' Journal of Applied Physics, Vol. 59, No. 11, pp. 3861-3867, 1986
DOI
|
8 |
Zeng, D. W., Yung, K. C. and Xie, C. S., 'UV Nd:YAG laser ablation of copper: chemical states in both crater and halo studied by XPS,' Applied Surface Science, Vol. 217, pp. 170-180, 2003
DOI
ScienceOn
|
9 |
Shin, B. S., Yang, S. B., Chang, W. S., Kim, J. G. and Kim, J. M., 'Rapid manufacturing of 3D-shaped microstructures by UV laser ablation,' Journal of the Korean Society for Precision Engineering, Vol. 21, No. 7, pp. 30-36, 2004
|
10 |
Hashida, M., Semerok, A. F., Gobert, O., Petite, G., Izawa, Y. and Wagner, J. F. 'Ablation threshold dependence on pulse duration for copper,' Applied Surface Science, Vol. 197-198, pp. 862-867, 2002
DOI
ScienceOn
|
11 |
Yoon, K. K. and Bang, S. Y., 'Modeling of polymer ablation with excimer lasers,' Journal of the Korean Society for Precision Engineering, Vol. 22, No. 9, pp. 60-68, 2005
과학기술학회마을
|
12 |
Chen, T. C. and Darling, R. B., 'Parametric studies on pulsed near ultraviolet frequency tripled Nd:YAG laser micromachining of sapphire and silicon,' Journal of Materials Processing Technology, Vol.169, pp.214-218, 2005
DOI
ScienceOn
|
13 |
Shin, B. S., Kim, J. G., Chang, W. S. and Whang, K. H., 'Rapid manufacturing of 3D micro products by UV laser ablation and phase change filling,' Journal of the Korean Society for Precision Engineering, Vol. 22, No. 11, pp. 196-201, 2005
과학기술학회마을
|
14 |
Kim, J. G., Chang, W. S., Shin, B. S., Chang, J. W. and Whang, K. H., 'Blind via hole drilling using DPSS UV laser,' Journal of Korean Society of Laser Processing, Vol. 6, No. 1, pp. 9-16, 2003
|
15 |
Mannion, P. T., Magee, J., Coyne, E., O'Connor, G. M. and Glynn, T. J., 'The effect of damage accumulation behaviour on ablation thresholds and damage morphology in ultrafast laser micromachining of common metals in air,' Applied Surface Science, Vol. 233, pp. 275-287, 2004
DOI
ScienceOn
|