1 |
Schaller, T., Bohn, L., Mayer, J. and Schubert, K., 'Microstructure grooves with a width of less than 50 cut with ground hard metal micro end mills,' Precision Engineering, Vol. 23, No.4, pp. 229-235, 1999
DOI
ScienceOn
|
2 |
Kim, M. S., Cho, S. I., Lee, K. N. and Kim, Y. K., 'Fabrication of microchip electrophoresis devices and effects of channel surface properties on separation efficiency,' Sensors and Actuators B, Vol. 107, No.2, pp. 818-824, 2004
|
3 |
Lee, H. S., 'In-plane deformation analysis and design of experiments approach for injection molding of light guide plate for LCDs,' International Journal of Precision Engineering and Manufacturing, Vol. 7, No. 1, pp. 51-56, 2006
과학기술학회마을
|
4 |
Shehab, E. M. and Abdalla, H. S., 'Manufacturing cost modeling for concurrent product development,' Robotics and Computer Integrated Manufacturing, Vol. 17, No.4, pp. 341-353, 2001
DOI
ScienceOn
|
5 |
Luo, X., Cheng, K., Webb, D. and Wardle, F., 'Design of ultraprecision machine tools with applications to manufacture of miniature and micro components,' Journal of Materials Processing Technology, Vol. 167, No. 2-3, pp. 515-528, 2005
DOI
ScienceOn
|
6 |
Liu, D., Zhou, X., Zhong, R., Ye, N., Chang, G, Xiong. W., Mei, X. and Lin, B., 'Analysis of multiplex PCR fragments with PMMA microchip,' Talanta, Vol. 68, No.3, pp. 616-622, 2005
DOI
ScienceOn
|
7 |
Chae, J., Park, S. S. and Freiheit, T., 'Investigation of micro-cutting operations,' International Journal of Machine Tools & Manufacture, Vol. 46, No. 3-4, pp. 313-332, 2006
DOI
ScienceOn
|
8 |
Mecomber, J. S., Hurd, D. and Limbach, P. A., 'Enhanced machining of micron-scale features in microchip molding masters by CNC milling,' International Journal of Machine Tools & Manufacture, Vol. 45, No. 12-13, pp. 1542-1550, 2005
|
9 |
Lee, S. H., Cho, S. I., Lee, C. S., Kim, B. G and Kim, Y. G, 'Microfluidic chip for biochemical reaction and electrophoretic separation by quantitative volume control,' Sensors and Actuators B, Vol. 110, No. 1, pp. 164-173, 2005
DOI
ScienceOn
|
10 |
Lee, K. and Dornfeld, D. A., 'Micro-burr formation and minimization through process control,' Precision Engineering, Vol. 29, No.2, pp. 246-252, 2005
DOI
ScienceOn
|
11 |
Ribeiro, J. C., Minas, G, Turmezei, P., Wolffenbuttel, R. F. and Correia, J., 'A SU-8 fluidic microsystem for biological fluids analysis,' Sensor and Actuators A , Vol. 123-124, No. 23, pp. 77-81, 2005
DOI
|
12 |
Takeuchi, Y., 'Ultraprecision micromachining of small workpieces with complicated shape,' Proceedings of Nanoengineering Symposium, pp. 129-134,2005
|
13 |
Ostwald, P. F., 'Engineering cost estimating,' Prentice Hall, pp. 250 - 279, 2002
|
14 |
Kalpakjian, S. and Schmid, S. R., 'Manufacturing processes for engineering materials,' Addison Wesley, pp. 490-493, 2002
|
15 |
Uhlmann, E., Piltz, S. and Doll, U., 'Machining of micro/miniature dies and moulds by electrical discharge machining - Recent development,' Journal of Materials Processing Technology, Vol. 167, No. 23,pp. 488-493, 2005
DOI
ScienceOn
|
16 |
Uhlmann, E., Piltz, S. and Schauer, K., 'Micro milling of sintered tungsten-copper composite materials,' Journal of Materials Processing Technology, Vol. 167, No. 2-3, pp. 402-407, 2005
DOI
|
17 |
Kwon, Y. and Fischer, G. W., 'A novel approach to quantifying tool wear and tool life measurements for optimal tool management,' International Journal of Machine Tools & Manufacture, Vol. 43, No.4, pp. 359-368, 2003
DOI
ScienceOn
|
18 |
Yoshino, M., Matsumura, T., Umehara, N., Akagami, Y., Aravindan, S. and Ohno, T., 'Engineering surface and development of a new DNA micro array chip,' Wear, Vol. 260, No.3, pp. 274-286, 2005
DOI
ScienceOn
|
19 |
Pumera, M., 'Microchip-based electrochromatography: designs and applications,' Talanta, Vol. 66, No.4, pp. 1048-1062, 2005
DOI
ScienceOn
|
20 |
Lee, K. H, Ahn, S. H., Dornfeld, D. and Wright, P. K., 'The effect of run-out on design for manufacturing in micro-machining process,' International Mechanical Engineering Congress and Exposition, pp. 11-16, 2001
|