Browse > Article

A Study on the PCB(Printed Circuit Board) Drilling by Air Bearing Spindle  

Bae Myung-Il (충남대학교 공과대학 기계공학과)
Kim Sang-Jin (충남대학교 대학원 기계공학과)
Kim Ki-Soo (충남대학교 공과대학 기술교육과)
Publication Information
Journal of the Korean Society for Precision Engineering / v.22, no.3, 2005 , pp. 15-20 More about this Journal
Abstract
This paper describes the PCB drilling using an ultra high-speed air bearing spindle system and micro drill. For this research, we have developed the ultra high-speed air bearing spindle of 125,000 rpm and made an experiment for the application possibility in the PCB drilling. In order to estimate the drilling performance, we have investigated the size and damage of drilled hole, and the wear of drill at 90,000rpm. Results are as follows; we have confirmed the possibility in the PCB drilling of air bearing spindle. In case of micro-drilling PCB at $0.1mm\sim0.3mm$, the increase in the number of drilling has resulted in a bigger size of holes and also a bigger size of damage. It has been found that the wear of micro drill tends to concentrate in the main cutting edge.
Keywords
Air bearing spindle; PCB(printed circuit board); Micro drill; Drill hole variation; Main cutting edge; Drill diameter; Wear of micro drill;
Citations & Related Records
Times Cited By KSCI : 1  (Citation Analysis)
연도 인용수 순위
1 Ogawa, K, Aoyama, E., Inoue, H, Hirogaki, T., Nobe, H, Kitahara, Y., Katayama, T. & Gunjima, M, 'Investigation on cutting mechanism in small diameter drilling for GFRP(thrust force and surface roughness at drilled hole wall),' Composite Structure, Vol. 38, No. 1-4, pp. 343-350, 1997   DOI   ScienceOn
2 Inoue, H., Aoyama, E., Rirogaki, T., Ogawa, K., Matushita, H, Kitahara, Y. & Katayama, T., 'Influence of tool waer on internal damage in small diameter drilling in GFRP,' Composite Structure, Vol. 39, No. 1-2, pp. 55-62, 1997   DOI   ScienceOn
3 Lee, J. H, 'The Change of PCB manufacturing technology,' The magazine of IEEK, Vol. 21, No.8, pp. 39-47, 19940
4 Cheong, M. S., Cho, D. W., Kernel, F. Ehmann., 'Identification and control for micro-drilling productivity enhancement,' Int Journal of Machine Tools & Manufacture, Vol. 39, pp. 1539-1561, 1999   DOI   ScienceOn
5 Frank, L., 'Wear and cutting performance of coated. micro drills,' Surface & Coatings Technology, Vol. 107, pp. 191-196, 1998   DOI   ScienceOn