Browse > Article

A Study on the Burr Minimization in Punching Process Based on Micro Die Alignment  

홍남표 (강원대학교 기계ㆍ메카트로닉스공학과 대학원)
신용승 (강원대학교 기계ㆍ메카트로닉스공학과 대학)
신홍규 (강원대학교 메카트로닉스공학과 대학)
김헌영 (강원대학교 기계ㆍ메카트로닉스공학)
김병희 (강원대학교 기계ㆍ메카트로닉스공학부)
Publication Information
Abstract
The shearing process for the sheet metal is normally used in the precision elements such as a lead frame of IC chips. In these precision elements, the burr formation brings a bad effect on the system assembly and demands the additional deburring process. In this paper, we developed the small size precision punching system to investigate burr formation mechanism and to present kinematically punch-die aligning methodology between the rectangular shaped punch and die. The punch is driven by an air cylinder and the sheet metal is moving on the X-Y table system which is driven by two stepping motors. The whole system is controlled by microprocessor and is communicated with each other by RS232C serial communication protocol. Punching results are measured manually using the SEM photographs and are compared aligning result with miss aligning one.
Keywords
Punching; Burr; Precision punching system; die alignment;
Citations & Related Records
연도 인용수 순위
  • Reference
1 Jeong, S.H., 'A study in shearing mechanism by FEM,' MS Thesis, Seoul National University, Korea, 1996
2 Breitling, J., Pfeiffer, B., Altan, T. and Siegert, Klaus, 'Process control in blanking,' Journal of Materials Processing Technology 71, pp. 187-192, 1997   DOI   ScienceOn
3 Ko, D.C., Kim, B.M., Choi, J.C., 'Finite-element simulation of the shear process using the element-kill method,' Journal of Materials Processing Technology 72, pp. 129-140, 1997   DOI   ScienceOn
4 Choy, C.M., Balendra, R., 'Experimental analysis of parameters influencing sheared-edge profiles,' Proceedings of the 4th international conference on sheet metal, pp. 101-110, 1996
5 Zhou, Q., Wierzbicki, T., 'A tension zone model of blanking and tearing of ductile metal plates,' International Journal of Mechanical Science Vol. 38. No. 3, pp. 303-324, 1996   DOI   ScienceOn
6 Li, Ming., 'Micromechanisms of deformation and fracture in shearing aluminum alloy sheet,' International Journal of Mechanical Science 42, pp. 907-923, 2000   DOI   ScienceOn
7 Taupin, E., Breitling, J., Wu, W.T. and Altan, T., 'Material fracture and burr formation in blanking results of FE simulations and comparison with experiments,' Journal of Materials Processing Technology 59, pp. 68-78,1996   DOI   ScienceOn
8 Stegeman, Y,W., Goijaerts, A.M., Brokken, D., Brekelmans, W.A.M., Govaert, L.E. and Baaijens, F.P.T., 'An experimental and numerical study of a planer blanking process,' Journal of Materials Processing Technology 87, pp. 266-276, 1999   DOI   ScienceOn
9 Lee, W.B., Cheung, C.F., Chan, LX,, Chiu, W.M., 'An investigation of process parameters in the dam-bar cutting of integrated circuit packages,' Journal of Materials Processing Technology 66, pp. 63-72, 1997   DOI   ScienceOn
10 Li, Ming., 'An experimental investigation on cut surface and burr in trimming aluminum automotive sheet,' International Journal of Mechanical Science 42, pp. 889-906, 2000   DOI   ScienceOn
11 Goijaerts, A.M., Govaert, L.E., Baaijens, F.P.T., 'Evaluation of ductile fracture models for different metals in blanking,' Journal of Material Processing Technology 100, pp.312-323, 2001   DOI   ScienceOn
12 Atkins, A.G., 'On cropping and related process,' International Journal of Mechanical Sciences 22, pp.215, 1980   DOI   ScienceOn
13 Chang, T. M., Swift, H. W., 'Shearing of Metal bars,' J. of the Inst. of Met., Vol. 78, pp. 393, 1950
14 Johnson, W., Slater, RAC., 'Survey of slow and fast blanking of metals at ambient and high temperatures,' Proceedings of the international Conference of Manufacturing Technology CIRP-ASTME, pp.825, 1967
15 Holiga, L.A., 'Punch to die clearance,' ASTME 33rd Annual meeting, 65(2), 1965