1 |
Data sheet: Corning 7740 borosilicate Pyrex, Corning Keramik GmbH and Co., Abraham-Lincoln Strasse 30, D-65189 Wiesbaden, Germany
|
2 |
Anthony C, Fischer-Cripps, 'Nanoindentation,' Springer, pp. 71-72, 2002
|
3 |
Lu, C.J., Bogy, D.B., 'The effect of tip radius on nano-indentation hardness tests,' Int. J. Solids Structures, Vol. 32, No. 12, pp. 1759-1770,1995
DOI
ScienceOn
|
4 |
Ashida, K., Chen, L. and Morita, N., 'New Maskless micro-fabrication technique of single-crystal silicon using the combination of nanometer-scale machining and wet Etching,' Proc. of 2nd euspen Int. Conf. 2001, Turin, Italy, May, pp. 78-81, 2001
|
5 |
Morita, N., 'Micro-fabrication technique of single crystal silicon by using combination of nano-scale machining and alkaline etching,' J. of the JSGE, Vol. 45, No. 6, pp. 275-278,2001
|
6 |
Hulsenberg, D., 'Glasses for microsystems technology,' Microelectronics Journal, Vol. 28, pp. 419-432, 1997
DOI
ScienceOn
|
7 |
Wu, H.F., Lin, C.C., Shen, P, 'Structure and dissolution of glass (II),' J. of Non-Crystalline Solids, Vol.209, pp. 76-86, 1997
DOI
ScienceOn
|
8 |
Sigoli, F.A., Kawano, Y, Davolos, M.R., Jafelicci Jr, M., 'Phase separation in pyrex glass by hydrothermal treatment: evidence from micro-Roman spectroscopy,' J. of Non-Crystalline Solids, Vol.284, pp. 49-54, 2001
DOI
ScienceOn
|
9 |
Youn, S.W, Kang, C.G., 'Maskless pattern fabrication on Si(100) surface by using nanoindenter with KOH wet etching,' Scripta Mater. , Vol. 50, No. 1,pp. 105-109,2004
DOI
ScienceOn
|
10 |
Kim. J.J., Choi, Y, Suresh, S., Argon, S.S, 'Nanocrystallization during nanoindentation of a bulk amorphous metal alloy at room temperature,' Science, Vol. 295, No. 5555, pp. 654-657, 2002
DOI
ScienceOn
|
11 |
Gretillat, M.A., Paoletti, F., Thiebaud, P., Roth, S., koudelka-Hep, M., de Rooij, N.F., 'A new fabrication method for borosilicate glass capillary tubes with lateral inlets and outlets,' Sensors and Actuators, Vol. A60, pp. 219-222, 1997
|
12 |
Shibata, T., Fuji, S., Makino, E. and Ikeda, M., 'Ductile-regime turning mechanism of single-crystal silicon,' Jpn. Prec. Eng., Vol. 18, No. 2/3, p. 130, 1996
DOI
ScienceOn
|
13 |
Yoshino, M., Kitamura, G., Ogawa, Y., 'Ductile mode machining of hard-brittle materials under high hydrostatic pressure (2nd report) - machining test of hard-brittle materials under high hydrostatic pressure,' Jpn. Prec. Eng., Vol. 68, No. 10, pp. 1351-1355,2002
DOI
|
14 |
Shapiro, K. Li., Li, J. C. M., 'Scratch test of soda-lime glass,' Acta mater., Vol. 46, No. 15, pp. 5569-5578, 1998
DOI
ScienceOn
|
15 |
Zhang, Y, Balaur, E., Manupai, S., Djenizian, T., Boukherroub, R., Schmiki, P., 'Nanopatterning of Si (111) surfaces by atomic force microscope scratching of an organic monolayer,' Electrochemistry Comunications, Vol. 5, pp. 337-340, 2003
DOI
ScienceOn
|
16 |
Yan, J. Syoji, K., Suzuki, H., Kuriyagawa, T., 'Ductile regime turning of single crystal silicon with a straight-nosed diamond tool,' Jpn. Prec. Eng., Vol. 64, No. 9, pp. 1345-1349, 1998
DOI
|
17 |
Yan, J., Syoji, K., Kuriyagawa, T., 'Chip Morphology of ultra-precision diamond turning of single crystal silicon,' Jap. Prec. Eng., Vol. 65, No. 7, pp. 1008, 1999
DOI
|
18 |
Chang, W.S., Shin, B.S., Whang, K.H., 'Nanoprobe application technologies,' J. Kor. Soc. Prec. Eng., Vol. 20, No. 3,pp.5-14, 2003
과학기술학회마을
|
19 |
Sung, I. H., Yang, J. C, Kim, D. E., Shin, B. S., 'Micro/nano-ribological characteristics of self-assembled monolayer and its application in nani-structure fabrication,' Wear, Vol. 255, pp. 808-818, 2003
DOI
ScienceOn
|
20 |
Heyde, M., Rademann, K., Cappella, B., Geuss, M., Sturm, H., Spangenberg, T. and Niehus, H. 'Dynamic plowing nanolithography on polymethylmethacrylate using an atomic force microscope,' Review of Scientific Instruments, Vol. 72, No. l,pp. 136-141,2001
DOI
ScienceOn
|