Browse > Article

Surface Roughness Characteristics of Cemented Carbide Ground by Laminated Diamond Wheel  

Kim, Kang (국민대학교 기계자동차공학부)
Publication Information
Journal of the Korean Society for Precision Engineering / v.20, no.8, 2003 , pp. 47-53 More about this Journal
Abstract
It was already proven experimentally that the laminated grinding wheel is superior to the general grinding wheel in the productivity of grinding. However, it can't be guaranteed when the workpiece material is cemented carbide. Because of its extreme hardness, the grinding wheels made up of super-abrasives are used for grinding it. So, to investigate the performance in extremely hard materials grinding using super-abrasive grinding wheels, the surface roughness characteristics of cemented carbide ground by the laminated diamond wheels are studied experimentally. Through this study, it is found that the similar surface roughness characteristics, those were found in the studies on the laminated aluminum oxide wheels, are still available.
Keywords
Surface Grinding; Laminated Diamond Wheel; Cemented Carbide; Surface Roughness;
Citations & Related Records
Times Cited By KSCI : 2  (Citation Analysis)
연도 인용수 순위
1 Kim, K. H. and Kim, K., 'A Study on the Roughness and Material Removal Rate of the Workpiece Using the Laminated Grinding Wheel in the Cylindrical Grinding Process,' Proc. of the KSPE Fall Conference, pp. 3-8, 1998
2 Lee, E. J., A Study on the Grinding of Hard Materials Using Laminated Grinding Wheels, Ph. D. Thesis, Kookmin Univ., pp. 115-116,2000
3 Kim, H. M., A Study on the Laminated Grinding Wheel Dressing, MS Thesis, Kookmin Univ., pp. 32, 2000
4 Luo, S. Y., 'Analysis of the Wear of a Resin-bonded Diamond Wheel in the Grinding of Tungsten Carbide,' J. of Material Processing Technology, pp. 289-296, 1997   DOI   ScienceOn
5 Kim, M. C., Kim, K. H., Lee, E. J. and Kim, K., 'Surface Characteristics of Cylindrically Ground Workpiece Using Laminated Grinding Wheel,' J. of the KSPE, Vol. 18, No.3, pp. 35-39,2001   과학기술학회마을
6 Lindsay, R. P., On the Metal Removal and Wheel Removal Parameters, Surface Finish, Geometry and Damage in Precision Grinding, Ph.D. Thesis, Worcester Polytechnic Institute, pp. 56, 1971
7 Gong, J. H., Ryu, B. H., So, E. Y., Lee, K. S. and Yu, E. Y., 'A Study on the Diamond Wheel Wear in Ceramic Grinding,' Proc. of KSMTE, pp. 344-348, Fall 2001   과학기술학회마을
8 Guak, C. H., Lee, E. J. and Kim, K., 'A Study on the Application of Laminated Grinding Wheel to Surface Grinding Operation,' J. of the KSPE, Vol. 17, No.9, pp.45-52, 2000   과학기술학회마을
9 Won, J. H., Kim, K. H., Ahn, B. J., Park, S. S. and Lee, J. O., 'The Grinding Characteristics of 5 Kind Metals for CBN Wheel,' J. of the KSPE, pp. 925-929, 2001   과학기술학회마을