Browse > Article

An Experimental Study on the Impact Characteristics of Surface Hardened Al 5052-H34 Alloy  

손세원 (건국대학교 기계항공공학부)
김희재 (육군사관학교 무기공학과)
이두성 (건국대학교 수학과)
홍성희 (건국대학교 기계설계학과 대학원)
Publication Information
Journal of the Korean Society for Precision Engineering / v.20, no.3, 2003 , pp. 178-186 More about this Journal
Abstract
In order to investigate the fracture behaviors (penetration modes) and the resistance to penetration during ballistic impact of Al 5052-H34 alloy laminates, cold-rolled Al 5052-H34 alloy laminates, anodized Al 5052-H34 alloy laminates, and anodized Al 5052-H34 alloy after cold-rolling, a ballistic testing was conducted. In general, superior armor materials are brittle materials which have a high hardness. Ballistic resistance of these materials was measured by a protection ballistic limit (V$_{50}$), a statistical velocity with 50% probability fur incompletete penetration. Fracture begaviors and ballistic tolerance, described by penetration modes, ate observed from the results from the results of V$_{50}$ test and Projectile Through Plates (PTP) test at velocities greater than V$_{50}$, respectively. PTP tests were conducted with 0$_{\circ}$obliquity at room temperature using 5.56mm ball projectile. V$_{50}$ tests with 0$_{\circ}$obliquity at room temperature were concucted with projectiles that could achieve neat or complete penetration during PTP tests. Surface hardness, resistance to penetration, and penetration modes of Al 5052-H34 alloy laminates are compared to those of cold-rolled Al 5052-H34 alloy laminates and anodized Al 5052-H34 alloy laminates and anodized Al 5052-H34 cold-rolled alloy.
Keywords
Resistance to penetration; Fracture behaviors; Protection ballistic limit;
Citations & Related Records
Times Cited By KSCI : 3  (Citation Analysis)
연도 인용수 순위
1 ATEC, U. S., 'U.S. ATEC. Test Operations Procedure 2-2-710 Ballistic Test for Armor,' A137973, U.S. Army Test Evaluation Command, Aberdeen Proving Ground, MD 21005
2 김희재, 육종일, 이승구, '고속 충격에 의한 세라믹/섬유강화 복합재료의 동적 파손 거동,' 한국재료학회지, Vol. 7, No. 9, pp. 795-804, 1997
3 Jang-J, Park-R, Yun-Y, Park-J, Kim-H, 'Failure of Ceramic/Fibre-Reinforced Plastic Composites Under Hypervelocity Impact Loading,' Journal of Materials Science, Vol. 32, No. 1, pp. 23-33, 1997   DOI   ScienceOn
4 Nair-SV, Subramaniam-A, Goettler-LA, 'Fracture-Resistance of Polyblends and Polyblend Matrix composites 2. Role of the Rubber Phase in Nylon 6,6/ABS Alloys,' Journal of Materials Science, Vol. 32, No. 20, pp. 5347-5354, 1997   DOI
5 손세원, 김희재, 홍성희, 박영의, '5052-H34 합금적층재의 방탄 성능과 파괴모드에 관한 연구,' 한국정밀공학회 추계학술대회 논문집, pp. 507-512, 2000   과학기술학회마을
6 손세원, 홍성희, '방탄소재의 연구동향 및 방탄헬멧 개발,' 한국정밀공학회지, 제17권, 제7호, pp. 7-19, 2002   과학기술학회마을
7 이흥주, '총과 탄도학,' pp. 284-285, 청문각, 2001
8 Orphal DL, Franzen RR, Piekutowski AJ, Forrestal MJ, 'Penetration of Confined Aluminum nitride targets by Tungsten rods at 1.5-4.5km/s,' International J. of Impact Eng., Vol. 18, pp. 355-386, 1996   DOI   ScienceOn
9 이용연, 심인옥, '알루미늄 경방탄재,' 재료마당, 제13권, 제5호, pp. 44-53, 2000
10 Crouch, I. G., 'Metallic Armor-from Cast Aluminum alloys to High-Strength Sheets,' Materials Forum, Vol. 12, pp. 31-37, 1988
11 Forrestal MJ, Okajima K, Luk VK, 'Penetration of 6061-T651 Aluminum targets with Rigid long rods,' ASME J. Appl. Mech., Vol. 55, pp. 755-760. 1988   DOI
12 U.S. Army Test Evaluation Command, 'U.S. Army Test Eval. comd. Test Operations Procedure 2-2-710 Ballistic Test for Armor,' A137973, U.S. Army Test Evaluation Command, Aberdeen Proving Groud, MD 21005
13 Backman, M. E. and Goldsmith, W., 'The Mechanics of Penetration of Projectiles into Targets,' International Journal of Engineering Science, Vol. 16, pp. 1-99, 1978   DOI   ScienceOn
14 U.S. Army Research Laboratory, 'Military Specification MIL-A-12560G, Armor Plate, Steel, Wrought, Homogeneous,' Dept. of the Navy, Defense Printing Service, Philadelphia, PA, 1984
15 U.S. Army Research Laboratory, 'Military Standard, V50 Ballistic Test for Armor, MIL-STD-662E,' Dept. of the Navy, Defense Printing Service, Philadelphia, PA, 1984
16 Manganello, S. J. and Forrest, R. D., 'Metallurgical Factors Affecting the Ballistic Behavior of Sheet Targets,' Journal of Materials, Vol. 7, No. 2, pp. 231-239, 1972
17 Kim, C. H., 'Fractographic Studies in Ballistically Damaged Polycrystalline Alumina,' Journal of the Korean Ceramic Society, Vol. 15, No. 3, pp. 127-134, 1978   과학기술학회마을
18 Zukas, J. A., T. Nicholas, Swift, H. F., Greszczuk, L. B. and Curran, DR., 'Penertration and Perforation of Solid,' Impact Dynamics, Zukas, J. A., et al., John Wiley and Sons, New York, pp. 155-183, 1982
19 Roger L. Ellis, Frederic Lalande, and Hongyu, Jia, 'Ballistic impact resistance of graphite composite with superelastic SMA and $SPECTRA_{TM}$ hybrid components,' Proceeding of American Institute of Aeronautics and Astronautics, AIAA-97-1044, pp. 908-916, 1997
20 이창길, 이성학, 이용연, '탄도 충격에 의하여 변형된 Al-Li 합금의 파괴 특성,' 금속학회지, 제31권, 제1호, pp. 7-15, 1993
21 John F. Chinella and Martin G. H. Wells, 'Ballistic Penetration and Fracture Modes of an austempered ductile iron and AISI 4140 Steels,' Structures Under Extreme Loading Conditions-1998, ASME, PVP-Vol. 361, pp. 37-53, 1998