1 |
R. B. Marks, "A multiline method of network analyzer calibration", IEEE Trans. Microwave Theory Tech., 39, pp. 1205-1215, Jul. 1991.
DOI
|
2 |
M. Wojnowski, V. Issakov, G. Sommer, and R. Weigel, "Multimode TRL calibration technique for characterization of differential devices", IEEE Trans. Microw. Theory Techn., vol. 60, no. 7, pp. 2220-2247, 2012.
DOI
|
3 |
http://projects.npl.co.uk/hf-circuits/
|
4 |
G. F. Engen, C. A. Hoer, "Thru-reflect-line: An improved technique for calibrating the dual six-port automatic network analyzer", IEEE Transactions on Microwave Theory and Techniques, vol. 27, no. 12, pp. 987-993, Dec. 1979.
DOI
|
5 |
A. G. Morgan, "A primary national standard impedance measurement system for the millimetre-wave frequency range", MSc dissertation, University of Surrey, Aug. 2007.
|
6 |
N. M. Ridler, R. G. Clarke, M. J. Salter, and A. Wilson, "Traceability to national standards for S-parameter measurements in waveguide at frequencies from 220 GHz to 330 GHz", Proc. 78th ARFTG Microwave Measurement Conf., pp. 1-6, Dec. 2011.
|
7 |
권재용, "전자파전력 측정 표준 개발과 연구 동향", 한국 전자파학회지 전자파기술, 24(3), pp. 3-11, 2013년 5월.
|
8 |
강진섭, 김정환, "Air Line 임피던스 표준을 이용한 동축 형 부하의 임피던스 정밀 측정", 한국전자파학회논문지, 11(5), pp. 788-795, 2000년 8월.
|
9 |
강진섭, 김정환, 조치현, 김대찬, "G-Band 도파관 산란 계수 정밀측정", 한국전자파학회논문지, 24(9), pp. 892-899, 2013년 9월.
DOI
|
10 |
M. Horibe, R. Kishikawa, "Metrological traceability in waveguide S-parameter measurements at 1.0 THz band", IEEE Trans. Instrum. Meas., vol. 62, no. 6, pp. 1814-1820, Jun. 2013.
DOI
|
11 |
M. Horibe, N. M. Ridler, "Traceability via precision dimensional measurements of WM-864 (WR-03) waveguide standard shims including comparison between NPL and NMIJ", Proc. 79th ARFTG Microw. Meas. Conf. Dig., pp. 1-8, 2012.
|
12 |
Y.-P. Hong, "Fat dipole antenna with broadband balun using CPW-to-slotline field transformation", Electronics Letters, vol. 49, no. 10, pp. 635-636, May 2013.
DOI
|
13 |
"Test methods to determine the amount of signal loss on printed boards (PBs)", IPC-TM-650 Test Methods Manual Method 2.5.5.12, May 2009 (available for download from http://www.ipc.org/4.0_Knowledge/4.1_Standards/test/2-5_2- 5-5-12.pdf)
|
14 |
어영선, "밀리미터파 평판 전송로의 특성 평가 기술", 한국전자파학회지 전자파기술, 24(3), pp. 31-41, 2013년 5월.
|
15 |
M. Salter, N. Ridler, Y.- P. Hong, D. Allal, F. Ziade, M, Hudlicka, and T. Pavicek, "A reference printed circuit board (PCB) for validating microwave measurements on PCBs and a differential calibration kit for traceable measurements", EUMW Workshops and Short Courses, 2015.
|
16 |
Y.-P. Hong, Y.-J. An, and J.-G. Yook, "Differential radial power combiner using substrate integrated waveguide", Electronics Letters, vol. 46, no. 24, pp. 1607-1608, Nov. 2010.
DOI
|
17 |
Y.-P. Hong, D. F. Kimball, P. M. Asbeck, J.-G. Yook, and L. E. Larson, "Single-ended and differential radial power combiners implemented with a compact broadband probe", IEEE Transactions on Microwave Theory and Techniques, vol. 58, no. 6, pp. 1565- 1572, Jun. 2010.
DOI
|
18 |
J. J. Yan, Y.-P. Hong, K. Mukai, S. Shinjo, and P. M. Asbeck, "Broadband high PAE GaN push-pull power amplifier for 500 MHz to 2.5 GHz operation", IEEE MTT-S International Microwave Symposium, Jun. 2013.
|
19 |
W. R. Eisenstant, B. Stengel, and B. M. Thompson, Microwave Differential Circuit Design Using Mixed-Mode SParameters, Artech House, 2006.
|
20 |
김유신, 이창석, "확장된 TRL 오차 수정 방법", 한국전자파학회논문지, 16(11), pp. 1099-1105, 2005년 11월.
|