Browse > Article
http://dx.doi.org/10.4313/JKEM.2019.32.6.490

The Behavior Variation of the Ion Viscosity and the Compressive Strength of the Seawater and Freshwater Flooded Chlorosulfonated Polyethylene After Accelerated Thermally Ageing  

Hong, So Young (Research & Development Center, Yeon Jin S-Tech)
Kim, Min Ju (Research & Development Center, Yeon Jin S-Tech)
Jeong, Eun Mi (Research & Development Center, Yeon Jin S-Tech)
Kim, Jin Pyo (Research & Development Center, Yeon Jin S-Tech)
Shin, Yong Deok (Research & Development Center, Yeon Jin S-Tech)
Publication Information
Journal of the Korean Institute of Electrical and Electronic Material Engineers / v.32, no.6, 2019 , pp. 490-495 More about this Journal
Abstract
This study performs the thermal aging of chlorosulfonated polyethylene (CSPE) for 807.36 and 1,614.48 hours at $110^{\circ}C$, which is equivalent to 40 and 80 years of aging at $50^{\circ}C$ in nuclear power plants, respectively. Flat-type CSPEs were soaked in seawater for five days and then dried for five days at room temperature. Furthermore, the soaked CSPEs were cleaned for 5 days with fresh water and dried for 1,100 days at room temperature. Through this process, the log IV of the CSPEs decreases, whereas the dissipation factor of the CSPEs increases as thermally accelerated aged years increase at the measured frequency. Although the phase degree of the response voltage versus excitation voltage of the CSPEs increases, that of the response current versus excitation voltage decreases with the thermally accelerated aging. The thermal conductivity of the CSPEs increases slightly, but the thermal diffusivity does not vary with the thermally accelerated aged year increase. The displacement of the compressive strength of the CSPEs decreases gradually as the thermally accelerated aged years increase.
Keywords
CSPE; Log IV; Dissipation factor; Loss factor; Phase degree; Thermal conductivity; Thermal diffusivity; Displacement of compressive strength;
Citations & Related Records
연도 인용수 순위
  • Reference
1 G. Janowska, A. Kucharska, W. M. Rzymski, and A. Kasiczak, J. Therm. Anal. Calorim., 102, 1019 (2010). [DOI: https://doi.org/10.1007/s10973-009-0622-2]   DOI
2 Korea Advanced Institute of Science and Technology, Department of Nuclear and Quantum Engineering, "Accident of Fukushima NPPs in Japan: Outcomes and impact, and lessons learned", (Interim Report), 2011.
3 U.S. Nuclear Regulatory Commission / Regulatory Guide 1.218 "Condition Monitoring Techniques for Electric Cables used in Nuclear Power Plants", Office of Nuclear Regulatory Research, Apr. 2012.
4 H. L. Lee, The Handbook of Dielectric Analysis and Cure Monitoring, Lambient Technologies L.L.C., (2014) pp. 13-16, pp. 31-32.
5 Lambient Technologies L.L.C., AN11-LT-451 and LCR Meter Comparison and LT-4203 Parallel Plate Test Fixture, Version 1.0, http://www.lambient.com (2014).
6 http://www.yeonjin.com
7 INTERNATIONAL STANDARD ISO 22007-2, "Plastics-Determination of thermal conductivity and thermal diffusivity-Part 2: Transient plane heat source (hot disc) method", First edition 8. December. 2008.
8 V. Tanrattanakul and A. Petchkaew, J. Appl. Polym. Sci., 99, 127 (2006). [DOI: https://doi.org/10.1002/app.22500]   DOI
9 A. Roychoudhury and P. P. De, J. Appl. Polym. Sci., 63, 1761 (1997). [DOI: https://doi.org/10.1002/(SICI)1097-4628 (19970328)63:13<1761::AID-APP8>3.0.CO;2-E]   DOI