Browse > Article
http://dx.doi.org/10.4313/JKEM.2011.24.10.812

Characteristic of DLC Thin Film Fabricated by FVAS Method on Tungsten Carbide  

Cheon, Min-Woo (Department of Biomedical Engineering, Dongshin University)
Park, Yong-Pil (Department of Biomedical Engineering, Dongshin University)
Kim, Tae-Gon (Department of Electrical and Electronic Engineering, Graduate School, Dongshin University)
Lee, Ho-Shik (Department of Biomedical Engineering, Dongshin University)
Publication Information
Journal of the Korean Institute of Electrical and Electronic Material Engineers / v.24, no.10, 2011 , pp. 812-816 More about this Journal
Abstract
An optical lens is usually produced in the manner of high temperature compression molding with tungsten carbide alloy molding cores, it is necessary to develop and study technology for super-precision processing of molding cores and coating the core surface. As main methods used in surface improvement technologies using thin film, DLC present high hardness, chemical stability, and outstanding durability of abrasion to be extensively applied in various industrial fields. In this study, the effect of DLC coating of a thin film by means of the FVAS (filtered vacuum arc source) analyzed the characteristics of thin film. Surface roughness before and after DLC coating was measured and the result showed that the surface roughness was improved after coating as compared to before coating. In conclusion, it was observed that DLC coating of the ultra hard alloy core surface for molding had an effect on improving the surface roughness and shape of the core surface. It is considered that this will have an effect on improving abrasion resistance and the service life of the core surface.
Keywords
Tungsten carbide; Diamond liked carbon; Thin film; Filtered vacuum arc source;
Citations & Related Records
Times Cited By KSCI : 4  (Citation Analysis)
연도 인용수 순위
1 H. Hanya, S. Kamiya, Y. Murakami, and Y. Kondoh, Surf. Coat. Technol., 200, 1137 (2005).   DOI
2 K. R. Lee and K. Y. Eun, Bull. Korean Inst. Met. Mater., 6, 345 (1993).
3 G. M. Pharr, D. L. Callahan, S. D. McAdams, T. Y. Tsui, S. Anders, A. Anders, J. W. Ager Ⅲ, I. G. Brown, C. S. Bhatia, S. R. P. Silva, and J. Robertson, Appl. Phys. Lett., 68, 779 (1996).   DOI
4 B. K. Tay, X. Shi, H. S. Tan, H. S. Yang, and Z. Sun, Surf. Coat. Technol., 105, 155 (1998).   DOI
5 H. S. Lee, M. W. Cheon, and Y. P. Park, J. KIEEME, 24, 219 (2011).
6 J. S. Park, B. S. Park, S. D. Kang, K. H. Yang, K. K. Lee, D. J. Lee, and K. M. Lee, J. Kor. Inst. Surf. Eng., 41, 88 (2008).   DOI
7 H. J. Kim, D. H. Cha, J. K. Lee, S. S. Kim, and J. H. Kim, J. KIEEME, 20, 720 (2007).
8 A. T. Yi and A. Jain, J. Am. Ceram. Soc., 88, 579 (2005).   DOI
9 H. U. Kim, S. H. Jeong, Y, P. Park, S. S. Kim, H. J. Kim, and J. H. Kim, J. KIEEME, 19, 1050 (2006).
10 C. Rincon, Surf. Coat. Technol., 148, 227 (2001).
11 J. Robertson, Mater. Sci. Eng., 37, 129 (2002).   DOI