Manufacture and Evaluation of Small Size PEMFC Stack Using Carbon Composite Bipolar Plate |
Han, C.
(Department of Nano & Chemical Engineering, Kunsan National University)
Choi, M. (Department of Nano & Chemical Engineering, Kunsan National University) Lee, J.J. (Regional Innovation Center for Fuel Cell Technology, Woosuk University) Lee, J.Y. (Regional Innovation Center for Fuel Cell Technology, Woosuk University) Kim, I.T. (Department of Applied Chemistry, Yamaguchi University) An, J.C. (Research & Development Center, Hanwha Chemical) Shim, J. (Department of Nano & Chemical Engineering, Kunsan National University) Lee, H.K. (Regional Innovation Center for Fuel Cell Technology, Woosuk University) |
1 | S.I. Heo, K.-S. Oh, J.-H. Jang, Y.-C. Yang, and K.-S. Han, 'A study on precuring condition of the 2-step manufacturing method for PEMFC composite bipolar plates', J. Kor. Soc. Comp. Mater., 20, 10 (2007). 과학기술학회마을 |
2 | U.-S. Jeon, E.A. Cho, H.-Y. Ha, S.-A. Hong, and I.-H. Oh, ‘Development of composite bipolar plates for PEM fuel cells’, Fuel Cell Symp. p283, July, 2003, Korea. |
3 | H. Kang, I. Han, and C. Lim, 'Development of composite bipolar plate for PEMFC', J. Kor. Soc. New & Renew. Energy, 3, 3 (2007). 과학기술학회마을 |
4 | E. Cho and I.-H. Oh, ‘Current R&D issues on bipolar plates of PEMFC’, Polym. Sci. Tech, 15, 612 (2004). |
5 | V. Metha and J.S. Cooper, ‘Review and analysis of PEM fuel cell design and manufacturing’, J. Power Sources, 114, 32 (2003). DOI |
6 | I. Bar-On, R. Kirchain, and R. Roth, ‘Technical cost analysis for PEM fuel cells', J. Power Sources, 109, 71 (2002). DOI |
7 | T.-H. Yang, “Preparation and Commercialization of Bipolar Plate”, Seminar, Fuel Cell Core Technology Center, 2006. |
8 | Y.-M. Koo, “Preparation and Evaluation of Fuel Cell Bipolar Plate”, Seminar, Fuel Cell Core Technology Center, 2009. |
9 | E.A. Cho, U.-S. Jeon, H.Y. Ha, S.-A. Hong, and I.-H. Oh, ‘Characteristics of composite bipolar plates for polymer electrolyte membrane fuel cells’, J. Power Sources, 125, 178 (2004). DOI |
10 | H.-S. Lee, S.-H. Ahn, U.-S. Jeon, S.-Y. Ahn, and B.-K. Ahn, 'Evaluation of mechanical and electrical properties of bipolar plate made of fiber-reinforced composites for PEM fuel cell', Trans. KSAE, 14, 39 (2006). 과학기술학회마을 |
11 | K.-J. Kim, Y. Yun, and Y. Jeon, 'The effect of contact resistance and electric conductivity on PEMFC performance', Proc. Kor. Soc. New & Renew. Energy, p133 (2007). 과학기술학회마을 |
12 | J.-W. Lee, J.-D. Kim, and D.-R. Park, ‘Characteristics of 5 kW class proton-exchange-membrane fuel cell (PEMFC) stack according to the long-term operation’, J. Kor. Ins. Gas, 11, 40 (2007). 과학기술학회마을 |
13 | H.-J. Hwang, T.-H. Yang, Y.-G. Yoon, W.-Y. Lee, Y.-G. Shul, and C.-S. Kim, 'The performance evaluation of the separator for PEMFCs', Proc. Kor. Soc. New & Renew. Energy, p288 (2005). |
14 | W. Choi, Y. Kim, S. Yu, Y. Lee, D. Hong, and K. Ahn, ‘An Experimental Study of Short Stack on the Performance of the Proton Exchange Membrane Fuel Cell for the Residential Power generation’, Proc. Kor. Soc. New & Renew. Energy, p21 (2008). 과학기술학회마을 |
15 | Y. Hong, J. Oh, H. Oh, and H. Kim, ‘Investigation of Fuel Cell Catalyst Degradation using Electrochemical analysis’, Proc. Kor. Soc. New & Renew. Energy, p208 (2007). |