Browse > Article
http://dx.doi.org/10.7857/JSGE.2016.21.3.006

Effect of Basic Oxygen Furnace Slag used as Structural Filling Materials on the Subsurface Environment  

Lee, Hosub (Department of Civil and Environmental Engineering, Seoul National University)
Nam, Taekwoo (Department of Civil and Environmental Engineering, Seoul National University)
Jho, Eun Hea (Department of Environmental Science, Hankuk University of Foreign Studies)
Nam, Kyoungphile (Department of Civil and Environmental Engineering, Seoul National University)
Publication Information
Journal of Soil and Groundwater Environment / v.21, no.3, 2016 , pp. 6-13 More about this Journal
Abstract
The effect of blast oxygen furnace (BOF) slag used as filling materials on the soil environment was studied using column tests that simulated the flow of the BOF slag leachate through the soil layer. The Cu, Mn, Zn, Ni, and F contents of the leachate affected soil were similar to that of the controls (i.e., soils that were not affected by the leachate). The As, Cd, and Pb contents were lower in the leachate affected soils than the controls. The changes in these contaminants contents can be attributed to the interactions between anions such as alkalinity generating anions (e.g., CO32−, HCO3, OH) or calcium ions with heavy metals or F, which consequently affected the fate of heavy metals and F in the leachate affected soils. The germination and growth of Spinapis alba in the soils affected by the leachate and the controls were also similar. However, the proportion of alkalophilic bacteria in the soils affected by the leachate significantly increased, and this can be explained by the increased soil pH due to the alkaline leachate. Overall, this study shows that the alkalinity of the BOF slag leachate, rather than the presence of heavy metals and F in the leachate, needs to be considered when the BOF slag is to be reused as structural filling materials.
Keywords
Basic oxygen furnace (BOF) slag; Structural filling material; Leaching; BOF slag leachate; Toxicity;
Citations & Related Records
Times Cited By KSCI : 4  (Citation Analysis)
연도 인용수 순위
1 Proctor, D.M., Fehling, K.A., Shay, E.C., Wittenborn, J.L., Green, J.J., Avent, C., Bigham, R.D., Connolly, M., Lee, B., Shepker, T.O., and Zak, M.A., 2000, Physical and chemical characteristics of blast furnace, basic oxygen furnace, and electric arc furnace steel industry slags, Environ. Sci. Technol., 34(8), 1576-1582.   DOI
2 Riley, A.L. and Mayes, W.M., 2015, Long-term evolution of highly alkaline steel slag drainage waters, Environ. Monit. Assess., 187(7), 1-16.   DOI
3 Samaras, P., Papadimitriou, C.A., Haritou, I., and Zouboulis, A.I., 2008, Investigation of sewage sludge stabilization potential by the addition of fly ash and lime, J. Hazard. Mater., 154(1), 1052-1059.   DOI
4 Waligora, J., Bulteel, D., Degrugilliers, P., Damidot, D., Potdevin, J.L., and Measson, M., 2010, Chemical and mineralogical characterizations of LD converter steel slag: a multi-analytical approach, Mater. Charact., 61(1), 39-48.   DOI
5 Shen, D.H., Wu, C.M., and Du, J.C., 2009, Laboratory invenstigation of basic oxygen furnace slag for substitution of aggregate in porous asphalt mixture, Constr. Build. Mater., 23(1), 453-461.   DOI
6 Tossavainen, M., Engstrom, F., Yang, Q., Menad, N., Lidstrom Larsson, M., and Bjorkman, B., 2007, Characteristics of steel slag under different cooling condition, Waste Manage., 27(10), 1335-1344.   DOI
7 Tsakiridis, P.E., Papadimitrious, G.D., Tsivilis, S., and Koroneos, C., 2008, Utilization of steel slag for Portland cement clinker production, J. Hazard. Mater., 152(2), 805-811.   DOI
8 Willems, A., 2014, The family phyllobacteriaceae, In: Edward F.D., Stephen L., Erko S., and Fabiano T.(ed.), The Prokaryotes: Other Major Lineages of Bacteria and The Archaea, Springer, Berlin, p. 355-418.
9 Mahieux, P.Y., Aubert, J.E. Escadeillas, G., and Measson, M., 2014, Quantification of hydraulic phase contained in a basic oxygen furnace slag, J. Mater. Civil Eng., 26(4), 593-598.   DOI
10 Manso, J.M., Lopez, V.O., Polanco, J.A., and Setien, J., 2003, The use of ladle furnace slag in soil stabilization, Constr. Build. Mater., 40, 126-134.
11 Mayes, M.W., Younger, P.L., and Aumonier, J., 2006, Buffering of alkaline steel slag leachate across a natural wetland, Environ. Sci. Technol., 40(4), 1237-1243.   DOI
12 Mayes, W.M., Younger, P.L., and Aumonier, J., 2008, Hydrogeochemistry of alkaline steel slag leachates in the UK, Water Air Soil Pollut., 195(1-4), 35-50.   DOI
13 OECD, 2006, Terrestrial Plant Test: Seedling Emergence and Seedling Growth Test, OECD/OCDE 208, Organisation for Economic Co-operation and Development (OECD).
14 McGowen, S.L., Basta, N.T., and Brown, G.O., 2001, Use of diammonium phosphate to reduce heavy metal solubility and transport in smelter-contaminated soil, J. Environ. Qual., 30(2), 493-500.   DOI
15 Poh, H.Y., Ghataora, G.S., and Ghazireh, N., 2006, Soil stabilization using basic oxygen steel slag fines, J. Mater. Civil. Eng., 18(2), 229-240.   DOI
16 Munoz-Melendez, G., Korre, A., and Parry, S. J., 2000, Influence of soil pH on the fractionation of Cr, Cu and Zn in Solid phases from a landfill site, Environ. Pollut., 110(3), 497-504.   DOI
17 Na, H., Yoon, Y., and Yoon, G., 2011, Environmental effect of the reduced slag in the electric furnace, J. Korean Geo-Environ. Soc., 12(7), 23-29.
18 Peek, D.C. and Volk, V.V., 1985, Fluoride sorption and desorption in soils, Soil Sci. Soc. Am. J., 49(3), 583-586.   DOI
19 Kim, K.H., Ryu, D.H., Kim, S.W., Lim, J.Y., Lee, J.M., and Lee, Y.J., 2009, Experimental study on Flexural Behavior of RC beams with electric arc furnace oxidizing slag aggregates, J. Archit. Inst. Korea Struct. Constr., 25(10), 27-34.
20 Kim, T.H., 2002, Beneficial reuse of steel slag, J. Korean Ceram. Soc., 5(5), 14-18.
21 Kim, W.K., 2014, Current state of recycling and properties of steel slag, J. Korean Recycl. Const. Resour. Inst., 9(2), 11-15.
22 KISA, 2010, Steel Statistical Yearbook 2010, Korean Iron and Steel Association.
23 KMOE, 2009, Official Standard Methods of Soil Quality - Metal, ES 07400, Korean Ministry of Environment.
24 Lekakh, S.N., Rawlins, C.H., Robertson, D.G.C., Richards, V.L., and Peaslee, K.D., 2008, Kinetics of aqueous leaching and carbonization of steelmaking slag, Metall. Mater. Trans. B, 39(1), 125-134.   DOI
25 Luxan, M.P., Sotolongo, R., Dorrego, F., and Herrero, E., 2000, Characteristics of the slags produced in the fusion of scrap steel by electric arc furnace, Cem. Concr. Res., 30(4), 517-519.   DOI
26 Kosson, D.S., van der Sloot, H.A., Sanchez, F., and Garrabrants, A.C., 2002, An integrated framework for evaluating leaching in waste management and utilization of secondary materials, Environ. Eng. Sci., 19(3), 159-204.   DOI
27 Lee, H. and Lee, D., 2005, Evaluation of Lead, Copper, Cadmium, and Mercury Species in the Leachate of Steel Making Slag by Seawater, J. Korean Soc. Environ. Eng., 27(1), 75-84.
28 Lee, K,J., You, S.Y., Lee, S.R., Ku, J.S., Kang, S.H., and Cho, B.S., 2011, Physicochemical properties analysis of rapidly chilled steel slag, J. Korea Concr. Inst., 23(1), 455-457.
29 Adam, G. and Duncan, H., 2002, Influence of diesel fuel on seed germination, Environ. Pollut., 120(2), 363-370.   DOI
30 Ahn, J.W., Cho, J.S., Kim, H.S., Han, G.C., Han, K.S., and Kim, H., 2003, Activation property of blast furnace slag by alkaline activator, J. Korean Ceram. Soc., 40(10), 1005-1014.   DOI
31 Blanco, I., Molle, P., Saenz de Miera, L.E., and Ansola, G., 2016, Basic oxygen furnace steel slag aggregates for phosphorus treatment, Evaluation of its potential use as a substrate in constructed wetlands, Water Res., 89(1), 355-365.   DOI
32 Anderson, C., Deram, A., Petit, D., Brooks, R.R., Stewart, R., and Simcock, R., 2001, Induced hyperaccumulation: metal movement and problems, In: I.K. Iskandar and M.B. Kirkham (ed.), Trace Elements in Soils: Bioavailability, Flux and Transfer, Lewis Publishers, New York, p. 63-76
33 Barisic, I., Dimeter, S., and Netinger, I., 2010, Possibilities of application of slag in road construction, Tech. Gazette, 17(4), 523-528.
34 Das, B., Prakash, S., Reddy, P.S.R., and Misra, V.N., 2007, An overview of utilization of slag and sludge from steel industries, Resour. Conserv. Recycl., 50(1), 40-57.   DOI
35 Barra, M., Ramonich, E.V., and Munoz, M.A., 2001, Stabilization of soils with steel slag and cement for application in rural and low traffic roads, Proceedings of the beneficial use of recycled materials in transportation application, Arlington, Virginia, p. 423-432.
36 Choi, S., Kim, V., Chang, W., and Kim, E., 2007, The present situation of production and utilization of steel slag in Korea and other countries, J. Korea Concr. Inst., 19(6), 28-33.
37 Czerniawska-Kusaza, I., Ciesielczuk, T., Kusaza, G., and Cichon, A., 2006, Comparison of the Phytotoxkit microbiotest and chemical variables for toxicity evaluation of sediment, Environ. Toxicol., 21(4), 367-372.   DOI
38 Goto, K., Fujita, R., Kato, T., Asahara, M., and Yokota, A., 2004, Reclassification of Breviabcillus brevis strains NCIMB 132288 and DSM 64742 (=NRRL NRS-887) as Aneurinibacillus danicus sp. Nov. and Brevibacillus limnophilus sp. Nov. Int. J. Sys. Evol. Microbiol., 54, 419-427.   DOI
39 Garcia-Gil, J.C., Kobza, J., Soler-Rovira, P., and Javorekova, S., 2013, Soil microbial and enzyme activities response to pollution near an aluminum smelter, Clean-Soil, Air, Water, 41(5), 485-492.   DOI
40 Kang, W., 2001, Assessment of chemical leachability of steel slag before and after aging treatments for environmentally safe reuse, Master's degree dissertation, Department of Civil Engineering, Hanyang University, p. 28-29.
41 Hull, S.L., Oty, U.V., and Mayes, W.M., 2014, Rapid recovery of benthic invertebrates downstream of hyperalkaline steel slag discharges, Hydrobiologia, 736(1), 83-97.   DOI
42 ISO, 2007, Soil quality – Leaching procedures for subsequent chemical and ecotoxicological testing of soil and soil materials; part 3: up-flow percolation test, ISO/TC 21268-3, International Organization for Standarization.
43 Kim, D., 2003, A study on long-term leaching behavior of steel slag before and after aging, Master's degree dissertation, Department of Civil Engineering, Hanyang University, p. 57-71.