Browse > Article
http://dx.doi.org/10.7471/ikeee.2018.22.2.506

Compliance Technologies of Electromagnetic Compatibility in Automotive Electronic Systems  

Shin, Youngsan (School of Electronic Engineering and Research Institute of Future Automobile, Soongsil University)
Lee, Seongsoo (School of Electronic Engineering and Research Institute of Future Automobile, Soongsil University)
Publication Information
Journal of IKEEE / v.22, no.2, 2018 , pp. 506-509 More about this Journal
Abstract
Recently, number of components and operation frequency rapidly increase in automotive systems. This often leads to EMI (electromagnetic interference) where automotive systems suffer from malfunctions induced by electromagnetic wave. This paper surveys various EMC (electromagnetic compatibility) compliance technologies such as EMI filter, EMI shielding materials, and spread spectrum clock generator. Their pros and cons are also explained.
Keywords
Automotive; EMC; EMI Filter; EMI Shielding Material; Spread Spectrum Clock;
Citations & Related Records
Times Cited By KSCI : 3  (Citation Analysis)
연도 인용수 순위
1 K. Cheng, C. Hung, C. Chang, Y. Lo, W. Yang, and J. Miaw, "A Spread-Spectrum Clock Generator Using Fractional-N PLL Controlled Delta-Sigma Modulator for Serial-ATA III," in Proc. of IEEE Workshop on Design and Diagnostics of Electronic Circuits and Systems, pp. 1-4, 2008. DOI: 10.1109/DDECS.2008.4538758
2 J. Mon, J. Gago, D. Gonzalez, J. Balcell, R. Fernandez, I. Gil, and P. Bogonez, "Modulation Technique to Reduce EMI in Power Multiconverters," IEICE Electronics Express, vol. 6, no. 8, pp. 511-515, 2009. DOI:10.1587/elex.6.511   DOI
3 H. Park, H. Jin, and J. Kang, "SSCG with Hershey-Kiss modulation profile using Dual Sigma-Delta modulators," IEICE Electronics Express, vol. 7, no. 18, pp. 1349-1353, 2010. DOI:10.1587/elex.7.1349   DOI
4 M. Coenen and A. Roermund, "Discrete Spread-spectrum Sampling (DSSS) to Reduce RF Emission and Beat Frequency Issues," in Proc. of IEEE Asia-Pacific International Symposium on Electromagnetic Compatibility, pp. 342-345, 2010. DOI: 10.1109/APEMC.2010.5475500
5 K. Schaapman, "Clock Jitter Cancelation in Coherent Data Converter Testing," IEEE International Test Conference, 2015.
6 A. Tarczynski, "FIR Filters for Systems with Input Clock Jitter," IEEE International Symposium on Circuits and Systems, vol. 2, pp. 617-620, 2001. DOI: 10.1109/ISCAS.2001.921146
7 Y. Moon, W. Lim, T. Kim, and J. Kang, "A Spread Spectrum Clock Generator for SATA II with Rounded Hershey-Kiss Modulation Profile," j.inst.Korean.electr.electron.eng, vol. 15, no. 2, pp. 129-133, 2011.
8 P. Andersen, "An Overview of Automotive EMC Standards," in Proc. of IEEE International Symposium on Electromagnetic Compatibility, pp. 812-816, 2006. DOI: 10.1109/ISEMC.2006.1706422
9 M. Steffka, "Automotive EMC Introduction and Overview," in Proc. of Advances in Automotive EMC Test and Design: A Colloquium and Exhibition, pp. 1-52, 2008.
10 M. Choi, C. Kim, and S. Lee, "Analysis of the Signal Transmission Characteristics with Curvature of PCB Pads," j.inst.Korean.electr.electron.eng, vol. 20, no. 4, pp. 416-419, 2016. DOI:10.7471/ikeee.2017.21.3.272
11 T. Park, J. Wee, and S. Lee, "A Low EMI Spread Spectrum Clock Generator Using TIE-Limited Frequency Modulation Technique," j.inst.Korean.electr.electron.eng, vol. 17, no. 4, pp. 537-543, 2013. DOI:10.7471/ikeee.2013.17.4.537
12 CISPR 25:2016, "Vehicles, boats and internal combustion engines - Radio disturbance characteristics - Limits and methods of measurement for the protection of on-board receivers," https://webstore.iec.ch/publication/26122
13 Y. Jung, J. Yook, H. Park, and K. Lee, "Power-Line EMI Filter for Broad-Band," Journal of KIEES, vol 16, no. 1, pp. 55-65, 2005.
14 D. Lee, M. Choi, and J. Park, "A Study on the Active EMI Filter for LED Driver," Journal of KIIEE. vol. 29, no. 2, pp. 62-68, 2015. DOI:10.5207/JIEIE.2015.29.2.062
15 J. Park, I. Song, B. Kim, and E. Kim, "A Study on the Evaluation Method of Shielding Effectiveness using NFS in Near-Field Tests," Journal of IEIE, vol. 53, no. 8, pp. 76-82, 2016. DOI: 10.5573/ieie.2016.53.8.076.
16 D. Kim and T. Wang, "Diesel Engine Technologies for Next-Generation Stage V Emission Regulation," Auto Journal, vol. 39, no. 10, pp. 25-30, 2017.
17 L. Wang, K. See, J. Zhang, B. Salam, and A. Lu, "Ultrathin and Flexible Screen-Printed Metasurfaces for EMI Shielding Applications," IEEE Transactions on Electromagnetic Compatibility, vol. 53, no. 3, pp. 700-705, 2011. DOI: 10.1109/TEMC.2011.2159509   DOI
18 L. Hsien, A. Chan, S. Hsien, L. Chia, and H. Wen, "Novel EMI Shielding Methodology on Highly Integration SiP Module," in Proc. of IEEE Components, Packaging, and Manufacturing Technology Symposium, pp. 1-4, 2012. DOI: 10.1109/ICSJ.2012.6523433
19 M. Choi, Y. Shin, and S. Lee, "Effects of PCB Patterns on EMI Measurement in TEM Cell and Proposal of PCB Design Guidelines", j.inst.Korean.electr.electron.eng, vol. 21, no. 3, pp. 272-275, 2017. DOI:10.7471/ikeee.2017.21.3.272
20 H. Won,, "The Development and Trends of the Variable Compression Ratio(VCR) Engines," Auto Journal, vol. 39, no. 10, pp. 19-23, 2017.