Browse > Article
http://dx.doi.org/10.7467/KSAE.2013.21.4.083

Effects of Injection Strategies on the Partial Premixed Charge Combustion and Emission Characteristics in a Diesel Engine  

Kim, Jaewoong (Department of Mechanical Engineering, Hanyang University)
Kim, Yungjin (Department of Mechanical Engineering, Hanyang University)
Park, Sangki (Department of Mechanical Engineering, Hanyang University)
Lee, Kihyung (Department of Mechanical Engineering, Hanyang University)
Publication Information
Transactions of the Korean Society of Automotive Engineers / v.21, no.4, 2013 , pp. 83-88 More about this Journal
Abstract
Recently, PCCI (premixed charge compression ignition) combustion is studied to reduce both NOx and PM because of homogeneous mixture formation and lower combustion temperature. It has also merit of increasing thermal efficiency owing to better air-fuel mixure. However, it is well known that PCCI combustion has a weakness in fuel economy because PCCI combustion tends to start before TDC. Therefore, it is necessary to find an optimal conditions for PCCI combustion which maintains reduction of NOx, PM and increase of thermal efficiency. In this study, pPCCI combustion was realized by adding early injection strategy to a conventional diesel engine. In addition, the characteristics of pPCCI combustion was analized by comparing conventional diesel injection strategy. The results show that NOx and PM per power in pPCCI combution were reduced compared to a conventional diesel combustion.
Keywords
pPCCI; Pilot injection; Early injection; Common-rail diesel engine;
Citations & Related Records
Times Cited By KSCI : 1  (Citation Analysis)
연도 인용수 순위
1 B. D. Park, S. I. Kwon, J. G. Oh and S. J. Kim, "Behavior of 2-stage Injection on Diesel Spray," Journal of ILASS-Korea, Vol.5, No.4, pp.33-39, 2000.
2 J. Benajes, R. Novella and S. Arthozoul, "Particle Size Distribution Measurements from Early to Late Injection Timing Low Temperature Combustion in a Heavy Duty Diesel Engine," SAE 2010-01-1121, 2010.
3 C. Park and S. Kook, "Effect of Multiple Injection in a HSDI Diesel Engine Equipped with Common Rail Injection System," SAE 2004-01-0127, 2004.
4 J. Chung, J. Kang, S. Lee, W. Kang and B. S. Kim, "A Study on the Effect of Compression Ratio and EGR on the Partial Premixed Diesel Compressed Ignition Combustion Engine Applied with the Split Injection Method," Transactions of KSAE, Vol.14, No.5, pp.32-38, 2006.   과학기술학회마을
5 J. Y. Heo, J. P. Cha, S. H. Yoon and C. S. Lee, "Effect of Multiple Injection on Combustion and Emission Characteristics in a Singlecylinder Direct Injection Diesel Engine," KSAE Spring Conference Proceedings, pp.37-42, 2010.
6 G. D. Neely and S. Sasaki, "Experimental Investigation of PCCI-DI Combustion on Emissions in a Light-duty Diesel Engine," SAE 2004-01-0121, 2004.
7 D. E. Foster, "Compression-igniter Homogeneous Charge Combustion," SAE 830264, 1983.
8 S. Lee and W. Park, "The Effect of Split Injection Strategy and Piston Bowl Geometry for Partially Homogeneous Charge Combustion Ignition Engine," KSAE09-B0015, 2009.
9 P. Carlucci and A. Ficarella, "Effects on Combustion and Emissions of Early and Pilot Fuel Injections in Diesel Engines," Int. J. Engine Res., Vol.6, No.1, pp.43-60, 2005.   DOI   ScienceOn
10 S. Mendez, "Using Multiple Injection Strategies in Diesel Combustion : Potential to Improve Emissions, Noise and Fuel Economy Trade-off in Low CR Engines," SAE 2008-01-1329, 2008.