Browse > Article

Finite Element Analysis of Mechanical Behavior of Bolt Tightened in Plastic Region  

Cho, Sung-San (Department of Mechanical & System Design Engineering, Hongik University)
Shin, Chun-Se (Department of Mechanical & System Design Engineering, Hongik University)
Publication Information
Transactions of the Korean Society of Automotive Engineers / v.18, no.3, 2010 , pp. 37-42 More about this Journal
Abstract
Plastic region tightening is widely used in critical bolted joints in internal combustion engines in order to reduce the engine weight by maximizing the use of load-carrying capacity of bolt. Mechanical behavior of bolt tightened in plastic region under external axial tensile load is investigated for various friction conditions using three dimensional finite element analysis. The behavior of bolt tightened in elastic region as well as that in tensile test are investigated for comparison. Tightening process is simulated by rotating the bolt in order to examine the friction effect realistically. It is revealed that the bolt tightened in plastic region can carry more external load until the joint is opened, and yields at lower bolt load than the bolt tightened in elastic region. The friction coefficient has effect on the yield load, but not on the load-carrying capacity. Moreover, the scatter in the bolt preload due to friction begins with plastic deformation of bolt in the angle tightening control, whereas it begins with the onset of tightening in the torque tightening control. The observations are interpreted with the residual torsional stress in the bolt generated during the tightening.
Keywords
Plastic region tightening; Elastic region tightening; Bolt preload; Yield; Finite element analysis;
Citations & Related Records
Times Cited By KSCI : 1  (Citation Analysis)
연도 인용수 순위
1 S. A. Nassar, P. H. Matin and G. C. Barber, "Thread Friction Torque in Bolted Joint," Journal of Pressure Vessel Technology, Vol.127, pp.387-393, 2005.   DOI   ScienceOn
2 T. Fukuoka and T. Takaki, "Mechanical Behaviors of Bolted Joint during Tightening Using Torque Control," JSME International Journal, Series A, Vol.41, No.2, pp.185-191, 1998.   DOI   ScienceOn
3 J. Newnham and L. Curley, "Bolted Joints Under Tensile Service Loads: The Effect of Torsion in the Bolt on In-Service Clamping Loads," Journal of Mechanical Design, Vol.115, pp.36-40, 1993.   DOI   ScienceOn
4 T. Okubo, S. Tanaka and K. Gorumaru, "Reliability Evaluation of Bolts Tightened in Plastic Region and Their Application to Diesel Engines," SAE 840505, 1984.
5 G. R. Toth, "Torque and Angle Controlled Tightening Over the Yield Point of a Screw- Based on Monte-Carlo Simuation," Journal of Mechanical Design, Vol.126, pp.729-736, 2004.   DOI   ScienceOn
6 T. Fukuoka and T. Takaki, "Elastic Plastic Finite Element Analysis of Bolted Joint During Tightening Process," Journal of Mechanical Design, Vol.125, pp.823-830, 2003.   DOI   ScienceOn
7 J. M. Monaghan, "The Influence of Lubrication on the Design of Yield Tightened Joints," The Journal of Strain Analysis for Engineering Design, Vol.26, No.2, pp.123-132, 1991.   DOI
8 Y. Jiang, J. Chang and C. Lee, "An experimental study of Torque-Tension Relationship for Bolted Joints," International Journal of Materials and Product Technology, Vol.16, pp.417-429, 2000.
9 S. A. Nassar, H. El-Khiamy, G. C. Barber, Q. Zou and T. S. Sun, "An Experimental Study of Bearing and Thread Friction in Fasteners," Journal of Tribology, Vol.127, pp.263-272, 2005.   DOI   ScienceOn
10 S.-S. Cho, H. Chang and K. W. Lee, "Procedure for Computer-Aided Preload Selection of Engine Connecting-Rod Bolts," Int. J. Automotive Technology, Vol.8, No.3, pp.319-325, 2007.   과학기술학회마을
11 I. Chapman, J. Newnham and P. Wallace, "The Tightening of Bolts to Yield and Their Performance Under Load," Journal of Vibration, Acoustics, Stress, and Reliability in Design, Vol.108, pp.213-221, 1986.   DOI   ScienceOn