Browse > Article

A Study of the Improvement of Thermal Performance of a Junction Box of a Passenger Car  

Lee, Young-Lim (Division of Mechanical and Automotive Engineering, Kongju National University)
Publication Information
Transactions of the Korean Society of Automotive Engineers / v.16, no.2, 2008 , pp. 136-142 More about this Journal
Abstract
Thermal management of a junction box of a passenger car has recently become more challenging due to its smaller size and larger current capacity. Thus, it is essential to perform the thermal optimization of a junction box in its design on an early stage of vehicle design. In this study, 3 dimensional CFD simulation with experimental measurement has been done to study for better thermal management of the junction box. First, the study of thermal characteristics of electric relays in the junction box has revealed that each surface of the relay has very different thermal resistance. In addition, an idea to install a cooling fan on the junction box has been studied and it was found that the forced cooling method was not effective on the system to keep the thermal resistance to the reasonable level of the junction box. Finally, the effect of external flows around the junction box on the temperatures of the relays, fuses, etc. has been studied and the result shows that the installation of the junction box at the proper place in an engine room can avoid any unnecessary overdesign in thermal management.
Keywords
Junction box; CFD; Cooling; Relay; Thermal performance;
Citations & Related Records
연도 인용수 순위
  • Reference
1 Fluent, Version 6.1, Fluent, Inc., Lebanon, NH 2005
2 F. P. Incorpera and D. P. Dewitt, Fundamentals of Heat and Mass Transfer, Wiley, New York, 1990
3 Y. L. Lee, "An Analysis of Engine Cooling using a Three-dimensional Radiator Model," Transactions of KSAE, Vol.9, No.4, pp.10-17, 2001
4 T. Ikeya, N. Ito, A. Chiriku, M. Okada, Y. Miyazawa and N. Mochizuki, "Thermal Simulation of the Electrical Distribution Box," SAE 2001-01-0690, 2001
5 G. N. Ellison, Thermal Computations for Electronic Equipment, Krieger Publishing Company, Florida, 1989
6 Q. Yang and S. Spadoni, "Thermal Study of Electrical Devices in Electrical Distribution Box," SAE 9703030, 1997
7 Cooling Fans, Sanyo Denki Co., LTD, Tokyo, Japan
8 B. H. Soerstling, "Thermal-Electrical Modeling of Electrical Subsystems," SAE 981111, 1998