Browse > Article

Design of a Heat Exchanger to Reduce the Exhaust Temperature in a Spark-Ignition Engine  

Lee, Seok-Hwan (Korea Institute of Machinery and Materials)
Park, Jung-Seo (Department of Mechanical Engineering, Korea Advanced Institute of Science and Technology)
Bae, Choong-Sik (Department of Mechanical Engineering, Korea Advanced Institute of Science and Technology)
Publication Information
Transactions of the Korean Society of Automotive Engineers / v.15, no.3, 2007 , pp. 10-17 More about this Journal
Abstract
Design of experiments (DOE) technique has been used to design an exhaust heat exchanger to reduce the exhaust gas temperature under high load conditions in a spark-ignition engine. The DOE evaluates the influence and the interaction of a selected eight design parameters of the heat exchanger affecting the cooling performance of the exhaust gas through a limited number of experiments. The heat exchanger was installed between the exhaust manifold and the inlet of the close-coupled catalytic converter (CCC) to reduce thermal aging. To maximize the heat transfer between exhaust gas and coolant, fins were implemented at the inner surface of the heat exchanger. The design parameters consist of the fin geometry (length, thickness, arrangement, and number of fin), coolant direction, heat exchanger wall thickness, and the length of the heat exchanger. The acceptable range of each design parameter is discussed by analyzing the DOE results.
Keywords
Design of experiment; Heat exchanger; Thermal aging; Heat transfer;
Citations & Related Records
Times Cited By KSCI : 2  (Citation Analysis)
연도 인용수 순위
1 T. Nagel, W. Maus and J. Breuer, 'Development of Increased Test Conditions for Close-Coupled Catalyst Applications,' SAE 962079, 1996
2 Ngy Srun AP, 'Exhaust Heat Exchange Coefficient in a Pipe of an Internal Combustion Engine: EGR Cooler and Passenger Compartment Heating Applications,' SAE 2000-01-0966, 2000
3 M. B. Botros, B. S. Absulnour, T. E. Smith and M. C. Lai, 'Optimum Design Parameters of an Automotive Blower Fan Housing Scroll,' SAE 960965, 1996
4 W. Y. Fowlkes and C. M. Creveling, Engineering Methods for Robust Product Design - Using Taguchi Methods in Technology and Product Development, Addison-Wesley Publishing Company, 1995
5 G. Taguchi and S. C. Tsai, 'Quality Engineering (Taguchi Method) For The Development Of Electric Circuit Technology,' IEEE Transactions, Vol.44, No.2, pp.225-229, 1995
6 S. Lee and C. Bae, 'Effect of Exhaust Heat Exchanger on Catalytic Converter Temperature in an SI Engine,' Transactions of KSAE, Vol. 12, No.2, pp.9-16, 2004
7 B. Grandin and H. S. Angstrom, 'Replacing Fuel Enrichment in a Turbo Charged SI Engine : Lean Burn or Cooled EGR,' SAE 1999-01-3505, 1999
8 Y. K. Lui and J. C. Dettling, 'Evolution of Pd/Rh TWC Catalyst Technology,' SAE 930249, 1993
9 G. Taguchi, 'Taguchi Methods in LSI Fabrication Process,' IEEE International 6th Workshop on Statistical Methodology, pp.1-6, 2001
10 J. Antony and M. Kaye, Experimental Quality - A StrategicApproach to Achieve and Improve Quality, Kluwer Academy Publisher, 1999
11 R. J. Brisley, R. D. O''Sullivan and A. J. J.Willkins, 'The Effect of High Temperature Ageing on Platinum-Rhodium and Palladium-Rhodium Three Way Catalysts,' SAE 910175, 1991
12 S. Lee, C. Bae, Y. Lee and T. Han, 'Effects of Engine Operating Conditions on Catalytic Converter Temperature in an SI Engine,' Transactions of KSAE, Vol.10, No.3, pp.61-69, 2002
13 R. D. O'Sullivan and N. S. Will, 'The Effect of Intermittent Misfire and Air to Fuel Ratio Excursions on Exhaust Catalyst Temperature,' SAE 940927, 1994