Browse > Article

A Study on the Creep Deformation Behavior of Mg-Zn-Mn-(Ca) Alloys  

Kang, Dae-Min (Department of Mechanical Engineering, Pukyong National University)
Koo, Yang (Department of Mechanical Engineering, Pukyong National University)
Sim, Sung-Bo (Department of Mechanical Engineering, Pukyong National University)
Publication Information
Transactions of the Korean Society of Automotive Engineers / v.14, no.5, 2006 , pp. 73-78 More about this Journal
Abstract
In this paper, creep tests of Mg-Zn-Mn and Mg-Zn-Mn-Ca alloys, which were casted by mold with Mg-3%Zn-1%Mn and Mg-3%Zn-1%Mn-0.2%Ca, were done under the temperature range of 473-573K and the stress range of 23.42-78.00Mpa. The activation energies and the stress exponents were measured to investigate the creep plastic deformation of those alloys, and the rupture lifes of Mg-Zn-Mn alloy were also measured to investigate the fracture behavior. From the results, the activation energy of Mg-Zn-Mn and Mg-Zn-Mn-Ca alloys under the temperature range of 473-493K were measured as 149.87, 145.98KJ/mol, respectively, and the stress exponent were measured as 5.13, 6.06 respectively. Also the activation energies Mg-Zn-Mn and Mg-Zn-Mn-Ca alloys under the temperature range of 553-573K were obtained as 134.41, 129.22KJ/mol, respectively, and tress exponent were obtained as 3.48, 4.63, respectively. Finally stress dependence of rupture life and the activation energy of rupture life of Mg-Zn-Mn under the temperature range of 473-493K was measured as 8.05, 170.0(KJ/mol), respectively, which were a little higher than the results of steady state creep.
Keywords
Magnesium alloy; Creep rate; Deformation mechanism; Stress exponent; Activation energy; Rupture life;
Citations & Related Records
Times Cited By KSCI : 1  (Citation Analysis)
연도 인용수 순위
1 M. Liu, Q. Wang, X. Zeng, G. Yuan, Y. Zhu, and W. Ding, 'Mechanical Properties and Creep Behavior of Mg-Al-Ca Alloys,' Materials Science Forum Vols.488-489, pp.763-766, 2005
2 W. Yan, X. Shoumei, L. Wenhui and Z. Zhiwen, 'Effect of Si, Ca and Sr on the Creep-resistance of AZ91D Alloy,' Materials Science Forum Vols.488-489, pp.767-770, 2005
3 J. O. An, D. M. Kang, Y. Koo and S. B. Sim, 'A Study on the Creep Deformation Characteristic of AZ31 Mg Alloy at High Temperature,' Transactions of KSAE, Vol.13, No.13, pp.186-192, 2005   과학기술학회마을
4 V. Sklenicka, M. Pahutova, K. Kucharova, M. Svoboda and T. G. Langdon, 'Creep Processes in Magnesium Alloys and Their Composites,' Metallurgical and Materials Transactions A, Vol.33A, pp.883-888, 2002
5 J. O. An, K. I. Kang and D. M. Kang, 'A Study on the Creep Deformation Mechanism and Fracture Time of ZM31 Magnesium Alloy,' Proceedings of Spring Conference of KSMP, pp.282-287, 2005
6 D. M. Kim, H. S. Kim and S. I. Park, 'Magnesium for Automotive Application,' Journal of KSAE, Vol.18, No.5, pp.53-67, 1996
7 W. E. White and I. L. May, 'On Time- Temperature Parameters for Correlation of Creep - Rupture Data in Stainless Steel Weldments,' J. of Engineering Materials and Technology, Vol.100, pp.319-332, 1978   DOI   ScienceOn
8 S. S. Manson and C. R. Ensign, 'A Quarter -Century of Progress in the Development of Correlation and Extrapolation Methods for Creep Rupture Data,' Journal of Engineering Materials and Technology, Vol.101, pp.317-325, 1979   DOI   ScienceOn
9 J. P. Eum, S. G. Lim and B. Y. Hur, 'Mg-Zn-(Mn, Ca)합금의 개발', 한국주조학회, 제19권 제1호, pp.7-14, 1999