Browse > Article
http://dx.doi.org/10.17661/jkiiect.2017.10.3.206

Induction Motor Starting Characterization with Power Factor Correction Capacitors  

Son, Seok-Geum (Department of Electrical, Osan University)
Publication Information
The Journal of Korea Institute of Information, Electronics, and Communication Technology / v.10, no.3, 2017 , pp. 206-212 More about this Journal
Abstract
Induction motor torque is the reactive power is needed which corresponds to the exciting current to generate the magnetic flux as the product of current and flux. For use in the method of supplying the required reactive power to the induction motor power factor correction apparatus using a lot of ways to supply in place of the power supply side, when using a power factor compensation device can reduce the apparent power, the power factor can be improved. However, the distance to the emergency generator transformers or motors from the motor capacity is smaller but short and difficult to maneuver the theory and practice of the operating characteristics of the starting characteristics of the motor used a lot of large industrial plants were measured and analyzed. Therefore, this study investigated the motor starting Analysis and interpretation for the relationship with the large motor starting torque and speed during motor starting.
Keywords
Induction motor; High-Power Induction Motor; Motor Starting; Power Factor; Starting Current;
Citations & Related Records
Times Cited By KSCI : 1  (Citation Analysis)
연도 인용수 순위
1 Jong-Gyeum Kim, "A Research on Self-excitation and Power Factor Compensation of Induction Motor", KIEEME Vol 63P, No.4, 2014
2 "IEEE Recommended Practice for Industrial and Commercial Power System Analysis" 9.2.2, The Institute of Electrical and Electronics Engineers, Inc, IEEE Std 399-1997
3 IEEE recommended practice for electric power distribution for industrial plants, ANSI/IEEE Std. 141,1986
4 K-water "Large motor starting charac-teristic analysis report", 2012
5 Lee Eun-Chun, Kim Jae-Cheol, "Analysis on Induction Motor Starting KIEEME Vol. 26, No. 5, 2013
6 Yi Jo Son, "Power System Analysis and Optimization Technology", Munundang, 2014
7 Yi Jo Son, "IEC 60606 Short Circuit Study", SAEHONG EGINEERING & CONSULTANT CO., LTD. 2013
8 Yi Jo Son, "power Tools for Windows, Fault Current Calculation and Coordination", SAEHONG EGINEERING & CONSULTANT CO., LTD. 2008
9 Power Tools Manual, SKM, 2006
10 Seung-Jae Lee 외6, " Study on Emergency Generator Capacity Selection(PG3) in the Chemical Plant" KIEE Vol.29, No.12, 2015