Browse > Article
http://dx.doi.org/10.14346/JKOSOS.2019.34.5.72

A Study on the Structural Safety Analysis for Vinyl House at Wind Load  

Paik, Shinwon (Department of Civil, Safety and Environmental Engineering, Hankyong National University)
Publication Information
Journal of the Korean Society of Safety / v.34, no.5, 2019 , pp. 72-77 More about this Journal
Abstract
Vinyl house consists of main rafter, lateral member, clamps and polyethylene film. Many vinyl houses are used to grow fruits, flowers and vegetables in the countryside. Due to climate change, vinyl houses are often destroyed by strong winds or typhoons in summer. Many farmers suffer great economic damage from the collapse of vinyl houses. So it is very important to build a safe vinyl house and find a method to withstand this heavy wind load. In this study, a structural analysis was performed on four types of vinyl houses(10-single-4, 10-single-6, 10-single-7, 10-single-10). In addition, axial force and flexural moment are obtained from the structural analysis of four types of vinyl house. For these four types of vinyl house, structural safety was reviewed by obtaining the combined stress ratio by the strength design method. This structural review showed that the specifications for the vinyl house proposed in the design are not safe. Especially, the result of structural analysis for four types of vinyl house showed that the vinyl house structure constructed as a standard was a very dangerous structure. Therefore, it is necessary to devise diverse methods in order to make vinyl houses structurally safe for heavy wind load in the future. Also a variety of manual development is needed to prevent the collapse of vinyl houses at heavy wind load.
Keywords
vinyl house; axial force; flexural moment; heavy wind load; main rafter;
Citations & Related Records
Times Cited By KSCI : 4  (Citation Analysis)
연도 인용수 순위
1 H. J. Jung, S. H. Yang and T. H. Lee, "A Study on the Improvement of Greenhouse Frame to Bear the Heavy Snow", Journal of the Korea Academia-Industrial Cooperation Society, Vol. 16, No. 3, pp. 2242-2248, 2015.   DOI
2 K. C. Ro, "An Evaluation of the Structural Stability of a Clip Type Prefabricated Greenhouse under Strong Wind and Heavy Snow Conditions", Journal of the Korea Academia-Industrial Cooperation Society, Vol.15, No.6, pp.3423-3428, 2014.   DOI
3 D. J. Jung and C. Teng, "Effect of Wire Bracing to Snow Load Acting on Vinyl House Frame", Journal of the Korea Rural Building Institute, Vol. 12, No. 3, pp. 27-34, 2010.
4 S. W. Paik, "A Study on the Structural Safety Analysis for Vinyl House at Snow Load", J. Korean Soc. Saf., Vol. 34, No. 3, pp. 34-39, 2019.
5 Ministry of Land, Infrastructure and Transport, "Architectural Design Specification", 2018.
6 S. H. Cho, "Estimation of Modal Parameter for Plastic Film-Covered Greenhouse Arches", Journal of Earthquake Engineering Society of Korea, Vol. 14, No. 2, pp. 67-74, 2010.   DOI