Browse > Article
http://dx.doi.org/10.14346/JKOSOS.2018.33.1.7

Experimental Study of Friction Factors for Laminar, Transition, and Turbulent Flow Regimes in Helical Coil Tubes  

Park, Won Ki (Department of Plant System and Machinery, University of Science and Technology)
Kim, Taehoon (Department of Plant System and Machinery, University of Science and Technology)
Do, Kyu Hyung (Department of Plant System and Machinery, University of Science and Technology)
Han, Yong-Shik (Department of Plant Safety Technology, Korea Institute of Machinery and Materials(KIMM))
Choi, Byung-Il (Department of Plant Safety Technology, Korea Institute of Machinery and Materials(KIMM))
Publication Information
Journal of the Korean Society of Safety / v.33, no.1, 2018 , pp. 7-15 More about this Journal
Abstract
The friction factors according to the flow regimes in helical coil tubes depend on the coil diameter, the tube diameter, and the coil pitch. In previous studies, correlations for the laminar flow regime in helical coil tubes have been proposed. However, studies on the transition flow regime and the turbulent flow regime are insufficient and further researches are necessary. In this study, characteristics of the friction factors for the laminar, transition and turbulent flow regimes in helical coil tubes were experimentally investigated. The helical coil tubes used in the experiments were made of copper. The curvature ratios of the helical coil tubes, which means the ratio of helical coil diameter to inner diameter of the helical coil tube are 24.5 and 90.9. Experiments were carried out in the range of $529{\leq}Re{\leq}39,406$ to observe the flows from the laminar to the turbulent regime. The friction factors were obtained by measuring the differential pressures according to the flow rates in the helical coil tubes while varying the curvature ratios of the helical coil tubes. Experimental data show that the friction factors for the helical coil tube with 24.5 in the curvature ratio of the helical coil tube were larger than those in the straight tube in all flow regimes. As the curvature ratio of the helical coil tube increases, the friction factor in turbulent flow regime tends to be equal to that of the straight tube. In addition, it was confirmed that the transition flow regimes in the helical coil tubes were much wider than those in the straight tube, also the critical Reynolds numbers were larger than those in the straight tube. The results obtained in this experimental study can be used as basic data for studies on the water hammer phenomenon in helical coil tubes.
Keywords
friction factor; helical coil tube; dean number; critical reynolds number;
Citations & Related Records
연도 인용수 순위
  • Reference
1 S. K. Lee and C. S. Yang, "Water-hammer in the Pump Pipeline System with and without an Air-Chamber", J. Korean Soc. Saf., Vol. 26, No. 1, pp. 1-7, 2011.
2 G. H. Yoo, Y. K. Kim, G. S. Shin and T. W. Park, "Vibration Analysis on the Variable Configurations of Tube Conveying Fluid", J. Korean Soc. Saf., Vol. 16, No. 1, pp.25-30, 2001.
3 M. Ghobadi and Y. S. Muzychka, "A Review of Heat Transfer and Pressure Drop Correlations for Laminar Flow in Curved Circular Ducts", Heat Transfer Engineering, Vol. 37, No. 10, pp. 815-839, 2016.   DOI
4 C. Andrea and S. Lorenzo, "An Experimental Investigation Regarding the Laminar to Turbulent Flow Transition in Helically Coiled Pipes", Experimental Thermal and Fluid Science, Vol. 30, No. 4, pp. 367-380, 2006.   DOI
5 M.R.H. Nobari and A. Malvandi, "Torsion and Curvature Effects on Fluid Flow in a Helical Annulus", International Journal of Non-Linear Mechanics, Vol. 57, pp. 90-101, 2013.   DOI
6 J. Huaiming, H. Zhiyong, X. Yuanhui, D. Bing and Y. Yu, "Hydraulic Performance of Small Bending Radius Helical Coil-pipe", Nuclear Science Technology, Vol. 18, pp. 826-831, 2001.
7 R. L. Manlapaz and S. W. Churchill, "Fully Developed Laminar Flow in Helically Coiled of Finite Pitch", Chemical Engineering Communication, Vol. 7, pp. 57-78, 1980.   DOI
8 M. Adler, "Flow in Curved Tubes", Zeitschrift fur Angewandte Mathematik und Mechanik, Vol. 14, pp. 1659-1675, 1934.
9 M. Van Dyke, "Extended Stokes Series: Laminar Flow Through a Loosely Coiled Pipes", Journal of Fluid Mechanics, Vol. 86, pp. 129-145, 1978.   DOI
10 F. M. White, "Fluid Mechanics", MCGraw-Hill Education Korea, pp. 366-392, 2012.
11 JCGM 100:2008, "Evaluation of Measurement Data Guide to the Expression of Uncertainty in Measurement (GUM 1995 with minor corrections)", Paris:BIPM Joint Committee for Guides in Metrology, pp. 1-27, 2008.
12 S. W. Churchill, "Comprehensive Correlating Equations for Heat, Mass and Momentum Transfer in Fully Developed Flow in Smooth Tubes", Ind. Eng. Chem. Fundam., Vol. 16, pp. 109-116, 1977.   DOI
13 H. Ito, "Friction Factors for Turbulent Flow in Curved Pipes", American Society of Mechanical Engineers Journal of Basic Engineering Transaction, Vol. 81, pp. 123-132, 1959.
14 V. Kubair and C. B. S. Varrier, "Pressure Drop for Liquid Flow in Helical Coils", Transactions of Indian Institute of Chemical Engineering, Vol. 14, pp. 93-97, 1961-1962.
15 D. F. Schmidt, "Warmeubarang and Druckverlust in Rohrshlangen", Chemical Engineering Technology, Vol. 13, pp. 781-789, 1967.
16 P. S. Srinivasan, S. S. Nadapurkar and F. A. Holland, "Pressure Drop and Heat Transfer in Coils", Chemical Engineering Journal, Vol. 218, pp. CE113-CE119, 1968.
17 P. S. Srinivasan, S. S. Nadapurkar and F. A. Holland, "Friction Factors for Coils", Transactions of the Institution of Chemical Engineers, Vol. 48, pp. T156-T161, 1970.
18 P. Mishra and S. N. Gupta, "Momentum Transfer in Curved Pipes 1. Newtonian Fluids; 2. Non-Newtonian Fluids", Industrial and Engineering Chemistry Process Design and Development, Vol. 18, pp. 130-142, 1979.   DOI
19 L. Prandtl, "Erzeugung von Zirkulationen beim Schutteln von Gefahren", Zeitschrift fur Angewandte Mathematik und Mechanik, Vol. 29, No. 1, pp. 8-9, 1949.   DOI
20 C. M. White, "Fluid Friction and Its Relation to Heat Transfer", Transactions of Institution of Chemical Engineering (London), Vol. 10, pp. 66-86, 1929.
21 H. Ito, "Flow in Curved Pipes", Zeitschrift fur Angewandte Mathematik und Mechanik, Vol. 49, pp. 653-662, 1969.   DOI
22 D. Hasson, "Streamline Flow Resistance in Coils", Reservoir Correspondence, Vol. 1, pp. S1, 1955.
23 S. N. Barua, "On Secondary Flow in Stationary Curved Pipes", Quarterly Journal of Mechanics and Applied Mathematics, Vol. 6, pp. 61-77, 1963.
24 W. M. Collins and S. C. R. Dennis, "The Steady Motion of a Viscous Fluid in a Curved Tube", Quarterly Journal of Mechanics and Applied Mathematics, Vol. 28, pp. 133-156, 1975.   DOI
25 S. C. R. Dennis, "Calculation of the Steady Flow Through a Curved Tube Using a New Finite-Difference Scheme", Journal of Fluid Mechanics, Vol. 99, pp. 449-467, 1980.   DOI
26 S. Yanase, N. Goto and K. Yamamoto, "Dual Solution of the Flow Through a Curved Tube", Fluid Dynamics Research, Vol. 5, pp. 191-201, 1989.   DOI
27 H. Ito, "Pressure Losses in Curved Ducts: Coils", Engineering Science Data Unit, London:IHSESDU, 1977.