Browse > Article
http://dx.doi.org/10.14346/JKOSOS.2014.29.5.067

An Experimental Study on the Anchorage Capacity by Diameter and Anchor Type of Re-bar  

Cho, Seong-Yeol (Department of Safety Engineering, Seoul National University of Science and Technology)
Son, Ki-Sang (Department of Safety Engineering, Seoul National University of Science and Technology)
Publication Information
Journal of the Korean Society of Safety / v.29, no.5, 2014 , pp. 67-73 More about this Journal
Abstract
Construction equipment such as tower crane should be installed in a field without appropriate anchorage to cause a collapse of crane. The anchorage capacity can be varied with Anchor length, concrete strength, anchor diameter, hooked or non hooked these variables will be made and tested in the study. It is shown what anchorage capacity will be more effective case by case. Hooked and non-hooked rebar anchor concrete weight with dia 22mm rebar are shown with initial displacement at 170~220KN of hooked case and 200~210KN of non-hooked one which are linearly increased, without any ductility behavior with almost brittleness. Three(3) same test pieces are almost similarly behaviored without relation to hooked or non-hooked cases. It is found out that the bigger diameter of rebar becomes, the more resistant capacity could be made, but conversely ductility against sudden collapse similar to brittleness becomes the more insufficient. It is also found out that dia 16mm rebar could be more effectively applied to heavy support weight at construction sites.
Keywords
anchorage; supporting structure; concrete design strength; x-asis displacement;
Citations & Related Records
Times Cited By KSCI : 2  (Citation Analysis)
연도 인용수 순위
1 W. S. Yoo and W. Y. Park, "Materials for Civil Engineering", Hyung Seol Publishing Co., pp. 217-256, 2002.
2 J. S. Shin, "Reinforce Concrete Structure", Chun Moon Publishing Co., pp. 40-41, 2004.
3 H. J. Choi, K. K. Choi, O. C. Choi and Y. J. Hwang, "A Prediction Model of Shrinkage Cracking of Steel Fiber Reinforced Concrete", Journal of the Architectural Institute of Korea, Vol. 28, No. 6, pp. 59-66, 2012.   과학기술학회마을
4 K. H. Hong, J. A. Kim and O. C. Choi, "Bond Strength of RC Beams on the Rib Shape of Reinforcing Bars", Journal of the Architectural Institute of Korea, Vol. 23, No. 3, pp. 393-400, 2011.   과학기술학회마을   DOI
5 K. H. .Hong, J. Y. Kim, O. C. Choi and J. R. Lee, "The Influence of Concrete Compressive Strength on Rib Effect", Autumn Session Conference, Journal of the Architectural Institute of Korea, pp. 229-230, 2011.