Browse > Article

Experimental Study on the Strength of Concrete Specimens Mixed with Tire Chips  

Son, Ki-Sang (Department of Safety Engineering, Seoul National University of Technology)
Publication Information
Journal of the Korean Society of Safety / v.20, no.2, 2005 , pp. 84-90 More about this Journal
Abstract
This study is to use results of the experiment on the influence to the strength by mixing powders of wasted tires into regular remicon within a range of little effectiveness in durability, applicability, economic aspect, and workability, to put it to practical use and to apply as basic data from a view of recycling wasted tires as construction materials. And the concrete, which was mixed with 10mm particles with ratio of $0.5\%\;and\;1.0\%$ respectively at 270 of mixing strength, was reduced by $27\%$ in compressive strength compared to normal concrete, whereas concrete mixed with other than 10mm particles showed lower decrease ratio compared to the former by reducing only $1.0\%\~1.5\%$. it is found that as strength increases, the less in quantity of aggregate and the more increase in quantity of cement. When considered to the above result, it is estimated that concrete mixed with wasted tire particles could be better used in conditions of compressive force rather than tensile force, and could also be used for structures with flexural strengths as well. In conclusion, higher strengths could be made using waste tire mix.
Keywords
waste tire; sylinder mold; compressive strength; normal concrete;
Citations & Related Records
연도 인용수 순위
  • Reference
1 김오신, '시멘트 공업의 폐타이어 활용방안', 대한타이어협회, pp. 31-41, 2004
2 Guoqiang Li, Michael A. Stubblefield, Gregory Garrick, John Eggers, Christopher Abadie, Baoshan Huang 'Development of wasted tire modified concrete', Cement and Concrete Research, p. 10, 2004
3 Frank, M. Rich, 'Use of Tire Rubber in Asphalt Pavements in Sweden', Report of Borlange, Sweden, pp. 30, 1993
4 Shack, B.W. and Keene, P.W., 'Comparison of the Compressive and Flexural Strengths of concrete with and without Entrained Air', Civil Engineering, pp. 77-80, 1959
5 Frankin, R.E. and King J.M.J., 'Relations between Compressive and Indirect-tensile Strengths of Concrete', Road Res.Lab.Rep.LR 412, pp. 32, 1971
6 박금준, '2001년 폐타이어 회수 및 처리 현황 및 2002년 전망', 타이어 1호, pp. 33-39, 2002
7 서치호, 경량 콘크리트의 성질에 관한 실험적연구 한양대학교 대학원 석사학위논문, p. 29-31, 1985
8 김상국, '폐타이어 고무 분말의 재활용 확대방안 조사연구', 한국에너지 기술연구소, pp. 50-100, 1998.4
9 British Standard Institution, 'The Structural use of Concrete Design', Magazine of Concrete Research, Vol. 8, No. 23, pp. 84, 1956
10 Wright, P.J.F., 'Crushing and Flexural Strengths of Concrete made with Limestone Aggreate', Road Res.Lab, pp. 25, 1958
11 김영찬, '폐타이어 미분말을 이용한 경량콘크리트의 개발에 관한 연구', 순천대학교 석사학위 논문, pp. 3-6, 2001