Browse > Article
http://dx.doi.org/10.5574/KSOE.2012.26.4.064

Evaluation of Corrosion Property of Welding Zone of Stainless Steel by Laser Welding  

Moon, Kyung-Man (Department of Marine Equipment Engineering, Korea Maritime University)
Won, Jong-Pil (Department of Marine Equipment Engineering, Korea Maritime University)
Park, Dong-Hyun (Department of Marine Equipment Engineering, Korea Maritime University)
Kim, Yun-Hae (Department of Marine Equipment Engineering, Korea Maritime University)
Lee, Myung-Hoon (Department of Marine System Engineering, Korea Maritime University)
Kim, Jin-Gyeong (Education and Research Division, Korea Institute of Maritime and Fisheries Technology)
Publication Information
Journal of Ocean Engineering and Technology / v.26, no.4, 2012 , pp. 64-69 More about this Journal
Abstract
Laser welding was carried out on austenitic 304 (STS 304) and 22 APU stainless steels. In this case, the differences between the corrosion characteristics of the welding zones of the two stainless steels were investigated using electrochemical methods. The Vickers hardness values of the weld metal (WM) zones in both cases, the STS 304 and 22 APU stainless steels, showed relatively higher values than those of other welding zones. The corrosion current densities of the heat affected zone (HAZ) of the 22 APU and the base metal (BM) zone of the STS 304 exhibited the highest values compared to the other welding zones. It is generally accepted that when STS 304 stainless steel is welded using a general welding method, intergranular corrosion is often observed at the grain boundary because of its chromium depletion area. However, when laser welding was performed on both the STS 304 and 22 APU stainless steels, no intergranular corrosion was observed at any of the welding zones. Consequently, it is considered that the intergranular corrosion of stainless steel can be controlled with the application of laser welding.
Keywords
Laser welding; Intergranular corrosion; Weld metal; Heat affected zone; Corrosion current density; Chromium depletion;
Citations & Related Records
연도 인용수 순위
  • Reference
1 Kim, J.D. Kil, B.L. and Lee, C.J. (2006a). "The Weldability of haminated Stator Core for Motor by Pulsed Nd:YAG Laser[I]", Journal of the Korean Society of Marine Engineering, Vol 30, No 5, pp 629-635.
2 신민교 (1987). "기계공작법", 아성출판사, pp 242-245.
3 Kim, J.D. Yoo, S.J. and Kim, J.S. (2006b). "Optimization of Pulsed Nd:YAG Laser Welding Conditions for Sealing of Lithium-ion Battery", Journal of the Korean Society of Marine Engineering, Vol 30, No 5, pp 623-628.
4 Lee, Y.H. Kim, Y.H. and Kim, H. (2003). "Crevice Corrosion Resistance of Stainless Steel in Natural Sea Water with Different Post Welding Treatment", Corrosion Science and Technology, Vol 2, No 5, pp 219-224.
5 김민남, 김복인, 한정동 (2000). "습식수중 용접봉의 기계적 성질 에 관한 연구", 한국해양공학회지, 제14권, 제4호, pp 56-61.
6 김복인, 노창석, 정교헌, 김민남 (2001). "피복성분에 의한 수중용접봉의 아크 안정성 개선에 관한 연구", 한국해양공학회지, 제15권, 제4호, pp 75-79.
7 김진경, 강명신, 김영식 (2006). "선박용 디젤기관의 주철 부품 보수 용접 특성에 관한 연구", 한국해양공학회지, 제20권, 제2호, pp 41-45.
8 Nobuo, F. (1964). "Effect of Thermal Cycles on Corrosion Resistance in a Type 304 Stainless Steel", Journal of Japanese Welding Society, Vol 33, No 1, pp 55.   DOI
9 Lo, I.H. Lee, M.C Lim, K.Y Ho, W. Yang, G.C.Y. and Tsai, W.T. (2002). "Effect of Heat Treatment on the Pitting Corrosion Behavior of 347SS Weld Overlay", Corrosion Science and Technology, Vol 31, No 5, pp 361-367.
10 Moon, K.M. Lee, M.H. Kim, K.J. Kim, J.G. and Kim, S.J. (2003). "A Study on the Post-Weld Heat Treatment Effect to Mechanical Properties and Hydrogen Embrittlement for Heating Affected Zone of a RE36 Steel", Corrosion Science and Technology, Vol 2, No 6, pp 283-288.
11 Raja, V.S. Vershney, S.K. Raman, R. and Kulkarni, S.D. (1998). "Influence of Nitrogen on the Pitting Corrosion Behavior of 904L Weld Clad", Corrosion Science, Vol 40, No 10, pp 1609-1625.   DOI   ScienceOn
12 Tsay, L.W. Lin, W.L. Chenct S.W. and Leu G.S. (1997). "Hydrogen Sulphide Stress Corrosion Cracking of 2.25 Cr-Mo Steel Weldments", Corrosion Science, Vol 39, No 7, pp 1165-1176.   DOI   ScienceOn
13 Yoshihiko, M. (1972). "Corrosion of Austenitic Stainless Steel Welds", Journal of Japanese Welding Society, Vol 41, No 2, pp 154.
14 전대희 (1985). "부식과 방식의 관리", 일중사, pp 294-298.
15 안석환, 정정환, 남기우 (2005). "용접 열사이클 재현에 의한 SS400강 및 STS304강의 특성평가", 한국해양공학회지, 제19권, 제4호, pp 64-71.
16 이학렬 (1991). "금속부식공학", 연경문화사, pp 246-247.
17 오종인, 김영표, 박호경, 방한서 (2007). "선체구조용 A급 강재의 하이브리드 용접에 대한 열 및 역학적 특성에 관한 연구", 한국해양공학회지, 제21권, 제1호, pp 64-68.
18 Bilmes, P.D. Liorente, C.L. Saire Huaman, Gassa L.M. and Gervasi, C.A. (2006). "Microstructure and Pitting Corrosion of 13CrNiMo Weld Metal", Corrosion Science, Vol 48, pp 3261-3270.   DOI   ScienceOn
19 Devine, T.M. (1990). "The Mechanism of Sensitization of Austenitic Stainless Steel", Corrosion Science, Vol 30, No 23, pp 135.   DOI   ScienceOn
20 Hiroshi, I. (1978). "Study of Weld Decay in SUS 304", Journal of Japanese Welding Society, Vol 47, No 3, pp 153.   DOI
21 Jang, S.K. and Jeon, J.I. (2006). "Wedability of Al 7075 Alloy According to Different Tools and Welding Conditions by F.S.W.", Journal of the Korean Society of Marine Engineering, Vol 30, No 1, pp 30-41.