Browse > Article

A Study on the Analysis of Welding Distortion for Moon Pool Structure of FPSO Vessel  

KIM SANG-IL (Ship & Marine Structure R&D Team, Daewoo Shipbuilding & Marine Engineering Co., Ltd.)
Publication Information
Journal of Ocean Engineering and Technology / v.17, no.3, 2003 , pp. 27-32 More about this Journal
Abstract
The welding distortion of a hull structure in the shipbuilding industry is inevitable at each assembly stage. The geometric inaccuracy caused by the distortion tends to preclude the introduction of automation and mechanization. Thus, additional man-hours are needed for the adjusting work in the assembly stage. To overcome this problem, a distortion control method should be applied. For this purpose, it is necessary to develop an accurate prediction method that can explicitly account for the influence of various factors on the welding distortion. In order to minimize the weld-induced residual deformation, this paper proposes the optimum welding sequence as a method for distortion control. The validity of this method has been substantiated by a number of numerical simulations and experiments.
Keywords
Welding Distortion 용접변형;Geometric Inaccuracy 기하학적 부정확성;Additional Man-Hours 추가 공수;Distortion Control Method 변형 제어법;Optimum Welding Sequence 최적의 용접순서;
Citations & Related Records
Times Cited By KSCI : 1  (Citation Analysis)
연도 인용수 순위
1 Ueda, Y. and Yamakawa, T. (1973), "Analysis of Thermal Elastic-Plastic Behavior of Metals during Welding by Finite Element Method", Journal of the Japanese Welding Society, Vol 42, No 6, pp 567-577   DOI
2 김상일, 강중규, 조용관, 한종만 (1997), “fillet 용접된 판의 열 탄소성해석에 관한 연구”, 한국해양공학회 추계학술대회 논문집, pp 338-348
3 Kim, S.I., Kang, J.K. and Han, J.M. (2002), "Development of Welding Deformation Control Method for Hull Structure of Ro/Ro Passenger Ferry", Proc. ISOPE- 2002, pp 314-320
4 Fujita, Y. and Nomoto, T. (1972), "Studies on Thermal Elasto-Plastic Problems(1st Report)", Journal of the Society of Naval Architects of Japan, Vol 130, pp 183-191
5 Ueda, Y., Murakawa, H., Gu, S.M., Okumoto, Y. and Kamichika, R. (1992), "Simulation of Welding Deformation for Accurate Ship Assembling (1st Report)", Journal of the Society of Naval Architects of Japan, Vol 171, pp 395-404
6 김상일 (1999), 선체 구조의 용접변형 제어법 개발, 울산대학교 공학박사학위논문