Browse > Article

A Study on the X-ray Diffraction Analysis and the Fatigue Crack Growth Behavior for the Gas Piping Material  

임만배 (한국원자력연구소)
윤한기 (동의대학교 기계산업시스템공학부)
박원조 (경상대학교 수송기계공학부)
Publication Information
Journal of Ocean Engineering and Technology / v.16, no.3, 2002 , pp. 54-58 More about this Journal
Abstract
This study investigates a relationship between fracture mechanics parameters (Stress Intensity Factor Range: ΔK, Maximum Stress Intensity Factor; Kmax) and X-ray parameters (residual stress:$\sigma$r half-value breadth: B) for SG365 steel at elevated temperature up to 30$0^{\circ}C$. The fatigue crack propagation test were carried out and X-ray diffraction technique according to the direction of crack length was applied to fatigue fractured surface. The residual stress on the fracture surface was found to increase at low ΔK region, to reach a maximum value at a certain value of Kmax or ΔK and then to decrease. Residual stress was independent of stress ratio by arrangement of ΔK and half value breadth were independent of the arrangement of Kmax. The equation of $\sigma$r-ΔK was established by the experimental data. therefore, fracture mechanics parameters could be estimated by the measurement of X-ray parameters.
Keywords
X-ray Diffraction; Fatigue Crack Propagation Rate; Residual Stress; Half-Value Breadth; Stress Intensity Factor; Fatigue Fractured Surface;
Citations & Related Records
Times Cited By KSCI : 6  (Citation Analysis)
연도 인용수 순위
1 저온하에서 LNG저장탱크용 멤브레인재 (STS304강)의 피로균열진전거동 /
[ 김정규;김철수;김도식;윤인수 ] / 한국해양공학회지   과학기술학회마을
2 LNG 탱크용 알루미늄합금 A5083-0의 관통균열 전파거동 예측모델 /
[ 김영식;조상명;김종호 ] / 한국해양공학회지   과학기술학회마을
3 WC-Co초경합금의 X-선 프랙토그래피법에 의한 파괴역학 파라미터의 평가 /
[ 부명환;박영철 ] / 대한기계학회논문집(A)
4 X-ray diffraction observation of fracture surface of ductile cast iron /
[ Yajima, Z.;Hirose, Y.;Tanaka, K. ] / Adv. X-ray Anal 26
5 X-Ray study on fracture surface of SM50A and HT80 steels /
[ Ogura, K;Miyoshi, Y.;Kayama, M.;Shoji, Y. ] / JSMS   DOI
6 Standard test method for measurement of fatigue crack growth rates /
[ ASTM ] / ASTM Standard E647-97
7 SG365강의 파괴저항특성과 찢어짐계수에 관한 연구 /
[ 임만배;윤한기 ] / 한국해양공학회지   과학기술학회마을
8 Application of X-ray fractograpic technique to actual failure analysis /
[ Matsui, K.;Hirose, Y.;Chadani, A.;Tanaka, K. ] / JSFM
9 링 압인으로 인한 잔류압축응력이 피로균열 성장률에 미치는 영향 /
[ 이강용;강종묵 ] / 대한기계학회논문집   과학기술학회마을
10 Standard test method of Tension Testing of Metallic Materials /
[ ASTM ] / ASTM E8
11 미시조직에 민감한 피로균열진전거동 /
[ 김정규;황돈영;박영조 ] / 대한기계학회논문집   과학기술학회마을
12 X-ray fractography on fatigue fracture surface /
[ Sekita, Y.;Kodama, S.;Misawa, H. ] / JSMS   DOI
13 신뢰성 공학적 피로균열의 발생진전수명 평가 및 예측에 관한 연구(II) /
[ 권재도;곽상국;최선호;황재석;진영준 ] / 대한기계학회논문집(A)
14 Residual stress and half-value breadth of fatigue fractured surface of various structural steels measured by X-ray diffraction /
[ Nagai, K.;Kitagawa, M.;Ohtomo, A. ] / JSMS   DOI